Hi All / Wolfgang, Both of the links came up [ configuration change to CRC4 on both sides and i changed the TDMV_DCHAN to 0 as you recommended. Thanks a lot for your support. Rgds, Junaid On Wed, Dec 16, 2009 at 8:55 AM, Wolfgang Pichler <wpichler at yosd.at> wrote: > Hi, > > i am not an expret here - but have you triied to set > > TDMV_DCHAN = 0 > > instead of commenting it out ? > > Maybe it takes a default value if commented out... > > best regards, > Wolfgang > > 2009/12/15 Junaid Saeed Uppal <junaid.uppal at gmail.com> > >> Hi Guys, >> >> This is the first time , I am posting , but have been reading the list >> quietly for a while. >> >> I have a Sangoma A102 , connecting to a Siemens D900 Switch , I cannot >> get the link to align at all, The far end switch is Siemens GSM [ SR 13 ] >> switch , config from the switch side is NCRC, NAT0 , HDB3 , NO Multiframe , >> BCR >> >> [root at in-tickets libss7]# ./ss7linktest 16 itu 2259 2256 >> Starting link 1 >> Link state change: IDLE -> NOTALIGNED >> Len = 4 [ ff ff 01 00 ] >> FSN: 127 FIB 1 >> BSN: 127 BIB 1 >> >[0] LSSU SIO >> >> Link state change: NOTALIGNED -> IDLE >> Link state change: IDLE -> NOTALIGNED >> Link state change: NOTALIGNED -> IDLE >> Link state change: IDLE -> NOTALIGNED >> Link state change: NOTALIGNED -> IDLE >> Link state change: IDLE -> NOTALIGNED >> Link state change: NOTALIGNED -> IDLE >> Link state change: IDLE -> NOTALIGNED >> Link state change: NOTALIGNED -> IDLE >> Link state change: IDLE -> NOTALIGNED >> Link state change: NOTALIGNED -> IDLE >> Link state change: IDLE -> NOTALIGNED >> >> >> >> [root at in-tickets libss7]# wanrouter hwprobe >> ------------------------------- >> | Wanpipe Hardware Probe Info | >> ------------------------------- >> 1 . AFT-A102-SH : SLOT=14 : BUS=0 : IRQ=58 : CPU=A : PORT=1 : HWEC=64 : >> V=33 >> 2 . AFT-A102-SH : SLOT=14 : BUS=0 : IRQ=58 : CPU=A : PORT=2 : HWEC=64 : >> V=33 >> >> Card Cnt: A101-2=1 >> >> I am using the following version of the software >> >> 1. Dahdi $Revision: 7539 $, $Date: 2009-11-09 20:32:45 +0100 (Mon, 09 Nov >> 2009) $ >> 2. LibSS7 - trunk >> 3. Asterisk - 1.6.2 >> 4. Centos 5.3 >> 5. 2.6.18-128 Kernel >> >> Everything compiles fine and i am able to load dahdi , but the SS7 link is >> never aligned and the status is always down >> >> /etc/dahdi/system.conf >> --------------------------------- >> >> #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit >> #autogenrated on 2009-12-16 >> #Dahdi Channels Configurations >> #For detailed Dahdi options, view /etc/dahdi/system.conf.bak >> loadzone=us >> defaultzone=us >> >> #Sangoma A102 port 1 [slot:14 bus:0 span:1] <wanpipe1> >> span=1,0,0,ccs,hdb3 >> bchan=1-15,17-31 >> mtp2=16 >> #Sangoma A102 port 2 [slot:14 bus:0 span:2] <wanpipe2> >> span=2,0,0,ccs,hdb3 >> bchan=32-46,48-62 >> mtp2=47 >> >> /etc/wanpipe/wanpipe1.conf >> --------------------------------------- >> >> [devices] >> wanpipe1 = WAN_AFT_TE1, Comment >> >> [interfaces] >> w1g1 = wanpipe1, , TDM_VOICE, Comment >> >> [wanpipe1] >> CARD_TYPE = AFT >> S514CPU = A >> CommPort = PRI >> AUTO_PCISLOT = NO >> PCISLOT = 14 >> PCIBUS = 0 >> FE_MEDIA = E1 >> FE_LCODE = HDB3 >> FE_FRAME = NCRC4 >> FE_LINE = 1 >> TE_CLOCK = NORMAL >> TE_REF_CLOCK = 0 >> TE_SIG_MODE = CCS >> TE_HIGHIMPEDANCE = NO >> LBO = 120OH >> FE_TXTRISTATE = NO >> MTU = 1500 >> UDPPORT = 9000 >> TTL = 255 >> IGNORE_FRONT_END = NO >> TDMV_SPAN = 1 >> #TDMV_DCHAN = 16 >> #TDMV_HW_DTMF = YES >> #TDMV_HW_FAX_DETECT = NO >> >> [w1g1] >> ACTIVE_CH = ALL >> TDMV_HWEC = NO >> >> >> /etc/wanpipe/wanpipe2.conf >> --------------------------------------- >> >> [devices] >> wanpipe2 = WAN_AFT_TE1, Comment >> >> [interfaces] >> w2g1 = wanpipe2, , TDM_VOICE, Comment >> >> [wanpipe2] >> CARD_TYPE = AFT >> S514CPU = A >> CommPort = PRI >> AUTO_PCISLOT = NO >> PCISLOT = 14 >> PCIBUS = 0 >> FE_MEDIA = E1 >> FE_LCODE = HDB3 >> FE_FRAME = NCRC4 >> FE_LINE = 2 >> TE_CLOCK = NORMAL >> TE_REF_CLOCK = 0 >> TE_SIG_MODE = CCS >> TE_HIGHIMPEDANCE = NO >> LBO = 120OH >> FE_TXTRISTATE = NO >> MTU = 1500 >> UDPPORT = 9000 >> TTL = 255 >> IGNORE_FRONT_END = NO >> TDMV_SPAN = 2 >> #TDMV_DCHAN = 16 >> #TDMV_HW_DTMF = YES >> #TDMV_HW_FAX_DETECT = NO >> >> [w2g1] >> ACTIVE_CH = ALL >> TDMV_HWEC = NO >> >> /etc/asterisk/chan_dahdi.conf >> ------------------------------------------- >> >> [trunkgroups] >> >> [channels] >> context=default >> usecallerid=yes >> hidecallerid=no >> callwaiting=yes >> usecallingpres=yes >> callwaitingcallerid=yes >> threewaycalling=yes >> transfer=yes >> canpark=yes >> cancallforward=yes >> callreturn=yes >> echocancel=yes >> echocancelwhenbridged=yes >> relaxdtmf=yes >> rxgain=0.0 >> txgain=0.0 >> group=1 >> callgroup=1 >> pickupgroup=1 >> immediate=no >> >> ss7type=itu >> signalling=ss7 >> ss7_called_nai=national >> ss7_calling_nai=national >> networkindicator=national_spare >> linkset=1 >> pointcode=2259 >> defaultdpc=2256 >> adjpointcode=2256 >> cicbeginswith=1 >> group=0 >> channel =>1-15,17-31 >> sigchan=16 >> >> ss7type=itu >> signalling=ss7 >> ss7_called_nai=national >> ss7_calling_nai=national >> networkindicator=national_spare >> linkset=2 >> pointcode=2260 >> defaultdpc=2256 >> adjpointcode=2256 >> sigchan=47 >> cicbeginswith=32 >> group=0 >> channel =>32-46,48-62 >> >> >> [root at in-tickets asterisk]# wanpipemon -i w1g1 -c Ta >> >> ***** w1g1: E1 Alarms (Framer) ***** >> >> ALOS: OFF | LOS: OFF >> RED: OFF | AIS: OFF >> LOF: OFF | RAI: OFF >> >> ***** w1g1: E1 Alarms (LIU) ***** >> >> Short Circuit: OFF >> Open Circuit: OFF >> Loss of Signal: OFF >> >> >> ***** w1g1: E1 Performance Monitoring Counters ***** >> >> Line Code Violation : 0 >> Far End Block Errors : 0 >> CRC4 Errors : 0 >> FAS Errors : 0 >> >> >> Rx Level : > -2.5db >> >> >> [root at in-tickets asterisk]# wanpipemon -i w2g1 -c Ta >> >> ***** w2g1: E1 Alarms (Framer) ***** >> >> ALOS: OFF | LOS: OFF >> RED: OFF | AIS: OFF >> LOF: OFF | RAI: OFF >> >> ***** w2g1: E1 Alarms (LIU) ***** >> >> Short Circuit: OFF >> Open Circuit: OFF >> Loss of Signal: OFF >> >> >> ***** w2g1: E1 Performance Monitoring Counters ***** >> >> Line Code Violation : 0 >> Far End Block Errors : 0 >> CRC4 Errors : 0 >> FAS Errors : 0 >> >> >> Rx Level : > -2.5db >> >> Kindly help me out. >> >> Best Regards, >> Junaid >> >> >> >> >> >> >> _______________________________________________ >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20091216/dd2cfbac/attachment-0001.htm
|