Hi, i am not an expret here - but have you triied to set TDMV_DCHAN = 0 instead of commenting it out ? Maybe it takes a default value if commented out... best regards, Wolfgang 2009/12/15 Junaid Saeed Uppal <junaid.uppal at gmail.com> > Hi Guys, > > This is the first time , I am posting , but have been reading the list > quietly for a while. > > I have a Sangoma A102 , connecting to a Siemens D900 Switch , I cannot get > the link to align at all, The far end switch is Siemens GSM [ SR 13 ] > switch , config from the switch side is NCRC, NAT0 , HDB3 , NO Multiframe , > BCR > > [root at in-tickets libss7]# ./ss7linktest 16 itu 2259 2256 > Starting link 1 > Link state change: IDLE -> NOTALIGNED > Len = 4 [ ff ff 01 00 ] > FSN: 127 FIB 1 > BSN: 127 BIB 1 > >[0] LSSU SIO > > Link state change: NOTALIGNED -> IDLE > Link state change: IDLE -> NOTALIGNED > Link state change: NOTALIGNED -> IDLE > Link state change: IDLE -> NOTALIGNED > Link state change: NOTALIGNED -> IDLE > Link state change: IDLE -> NOTALIGNED > Link state change: NOTALIGNED -> IDLE > Link state change: IDLE -> NOTALIGNED > Link state change: NOTALIGNED -> IDLE > Link state change: IDLE -> NOTALIGNED > Link state change: NOTALIGNED -> IDLE > Link state change: IDLE -> NOTALIGNED > > > > [root at in-tickets libss7]# wanrouter hwprobe > ------------------------------- > | Wanpipe Hardware Probe Info | > ------------------------------- > 1 . AFT-A102-SH : SLOT=14 : BUS=0 : IRQ=58 : CPU=A : PORT=1 : HWEC=64 : > V=33 > 2 . AFT-A102-SH : SLOT=14 : BUS=0 : IRQ=58 : CPU=A : PORT=2 : HWEC=64 : > V=33 > > Card Cnt: A101-2=1 > > I am using the following version of the software > > 1. Dahdi $Revision: 7539 $, $Date: 2009-11-09 20:32:45 +0100 (Mon, 09 Nov > 2009) $ > 2. LibSS7 - trunk > 3. Asterisk - 1.6.2 > 4. Centos 5.3 > 5. 2.6.18-128 Kernel > > Everything compiles fine and i am able to load dahdi , but the SS7 link is > never aligned and the status is always down > > /etc/dahdi/system.conf > --------------------------------- > > #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit > #autogenrated on 2009-12-16 > #Dahdi Channels Configurations > #For detailed Dahdi options, view /etc/dahdi/system.conf.bak > loadzone=us > defaultzone=us > > #Sangoma A102 port 1 [slot:14 bus:0 span:1] <wanpipe1> > span=1,0,0,ccs,hdb3 > bchan=1-15,17-31 > mtp2=16 > #Sangoma A102 port 2 [slot:14 bus:0 span:2] <wanpipe2> > span=2,0,0,ccs,hdb3 > bchan=32-46,48-62 > mtp2=47 > > /etc/wanpipe/wanpipe1.conf > --------------------------------------- > > [devices] > wanpipe1 = WAN_AFT_TE1, Comment > > [interfaces] > w1g1 = wanpipe1, , TDM_VOICE, Comment > > [wanpipe1] > CARD_TYPE = AFT > S514CPU = A > CommPort = PRI > AUTO_PCISLOT = NO > PCISLOT = 14 > PCIBUS = 0 > FE_MEDIA = E1 > FE_LCODE = HDB3 > FE_FRAME = NCRC4 > FE_LINE = 1 > TE_CLOCK = NORMAL > TE_REF_CLOCK = 0 > TE_SIG_MODE = CCS > TE_HIGHIMPEDANCE = NO > LBO = 120OH > FE_TXTRISTATE = NO > MTU = 1500 > UDPPORT = 9000 > TTL = 255 > IGNORE_FRONT_END = NO > TDMV_SPAN = 1 > #TDMV_DCHAN = 16 > #TDMV_HW_DTMF = YES > #TDMV_HW_FAX_DETECT = NO > > [w1g1] > ACTIVE_CH = ALL > TDMV_HWEC = NO > > > /etc/wanpipe/wanpipe2.conf > --------------------------------------- > > [devices] > wanpipe2 = WAN_AFT_TE1, Comment > > [interfaces] > w2g1 = wanpipe2, , TDM_VOICE, Comment > > [wanpipe2] > CARD_TYPE = AFT > S514CPU = A > CommPort = PRI > AUTO_PCISLOT = NO > PCISLOT = 14 > PCIBUS = 0 > FE_MEDIA = E1 > FE_LCODE = HDB3 > FE_FRAME = NCRC4 > FE_LINE = 2 > TE_CLOCK = NORMAL > TE_REF_CLOCK = 0 > TE_SIG_MODE = CCS > TE_HIGHIMPEDANCE = NO > LBO = 120OH > FE_TXTRISTATE = NO > MTU = 1500 > UDPPORT = 9000 > TTL = 255 > IGNORE_FRONT_END = NO > TDMV_SPAN = 2 > #TDMV_DCHAN = 16 > #TDMV_HW_DTMF = YES > #TDMV_HW_FAX_DETECT = NO > > [w2g1] > ACTIVE_CH = ALL > TDMV_HWEC = NO > > /etc/asterisk/chan_dahdi.conf > ------------------------------------------- > > [trunkgroups] > > [channels] > context=default > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > > ss7type=itu > signalling=ss7 > ss7_called_nai=national > ss7_calling_nai=national > networkindicator=national_spare > linkset=1 > pointcode=2259 > defaultdpc=2256 > adjpointcode=2256 > cicbeginswith=1 > group=0 > channel =>1-15,17-31 > sigchan=16 > > ss7type=itu > signalling=ss7 > ss7_called_nai=national > ss7_calling_nai=national > networkindicator=national_spare > linkset=2 > pointcode=2260 > defaultdpc=2256 > adjpointcode=2256 > sigchan=47 > cicbeginswith=32 > group=0 > channel =>32-46,48-62 > > > [root at in-tickets asterisk]# wanpipemon -i w1g1 -c Ta > > ***** w1g1: E1 Alarms (Framer) ***** > > ALOS: OFF | LOS: OFF > RED: OFF | AIS: OFF > LOF: OFF | RAI: OFF > > ***** w1g1: E1 Alarms (LIU) ***** > > Short Circuit: OFF > Open Circuit: OFF > Loss of Signal: OFF > > > ***** w1g1: E1 Performance Monitoring Counters ***** > > Line Code Violation : 0 > Far End Block Errors : 0 > CRC4 Errors : 0 > FAS Errors : 0 > > > Rx Level : > -2.5db > > > [root at in-tickets asterisk]# wanpipemon -i w2g1 -c Ta > > ***** w2g1: E1 Alarms (Framer) ***** > > ALOS: OFF | LOS: OFF > RED: OFF | AIS: OFF > LOF: OFF | RAI: OFF > > ***** w2g1: E1 Alarms (LIU) ***** > > Short Circuit: OFF > Open Circuit: OFF > Loss of Signal: OFF > > > ***** w2g1: E1 Performance Monitoring Counters ***** > > Line Code Violation : 0 > Far End Block Errors : 0 > CRC4 Errors : 0 > FAS Errors : 0 > > > Rx Level : > -2.5db > > Kindly help me out. > > Best Regards, > Junaid > > > > > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20091216/c19135fa/attachment.htm
|