Hi Guys, This is the first time , I am posting , but have been reading the list quietly for a while. I have a Sangoma A102 , connecting to a Siemens D900 Switch , I cannot get the link to align at all, The far end switch is Siemens GSM [ SR 13 ] switch , config from the switch side is NCRC, NAT0 , HDB3 , NO Multiframe , BCR [root at in-tickets libss7]# ./ss7linktest 16 itu 2259 2256 Starting link 1 Link state change: IDLE -> NOTALIGNED Len = 4 [ ff ff 01 00 ] FSN: 127 FIB 1 BSN: 127 BIB 1 >[0] LSSU SIO Link state change: NOTALIGNED -> IDLE Link state change: IDLE -> NOTALIGNED Link state change: NOTALIGNED -> IDLE Link state change: IDLE -> NOTALIGNED Link state change: NOTALIGNED -> IDLE Link state change: IDLE -> NOTALIGNED Link state change: NOTALIGNED -> IDLE Link state change: IDLE -> NOTALIGNED Link state change: NOTALIGNED -> IDLE Link state change: IDLE -> NOTALIGNED Link state change: NOTALIGNED -> IDLE Link state change: IDLE -> NOTALIGNED [root at in-tickets libss7]# wanrouter hwprobe ------------------------------- | Wanpipe Hardware Probe Info | ------------------------------- 1 . AFT-A102-SH : SLOT=14 : BUS=0 : IRQ=58 : CPU=A : PORT=1 : HWEC=64 : V=33 2 . AFT-A102-SH : SLOT=14 : BUS=0 : IRQ=58 : CPU=A : PORT=2 : HWEC=64 : V=33 Card Cnt: A101-2=1 I am using the following version of the software 1. Dahdi $Revision: 7539 $, $Date: 2009-11-09 20:32:45 +0100 (Mon, 09 Nov 2009) $ 2. LibSS7 - trunk 3. Asterisk - 1.6.2 4. Centos 5.3 5. 2.6.18-128 Kernel Everything compiles fine and i am able to load dahdi , but the SS7 link is never aligned and the status is always down /etc/dahdi/system.conf --------------------------------- #autogenerated by /usr/sbin/wancfg_dahdi do not hand edit #autogenrated on 2009-12-16 #Dahdi Channels Configurations #For detailed Dahdi options, view /etc/dahdi/system.conf.bak loadzone=us defaultzone=us #Sangoma A102 port 1 [slot:14 bus:0 span:1] <wanpipe1> span=1,0,0,ccs,hdb3 bchan=1-15,17-31 mtp2=16 #Sangoma A102 port 2 [slot:14 bus:0 span:2] <wanpipe2> span=2,0,0,ccs,hdb3 bchan=32-46,48-62 mtp2=47 /etc/wanpipe/wanpipe1.conf --------------------------------------- [devices] wanpipe1 = WAN_AFT_TE1, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 14 PCIBUS = 0 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 #TDMV_DCHAN = 16 #TDMV_HW_DTMF = YES #TDMV_HW_FAX_DETECT = NO [w1g1] ACTIVE_CH = ALL TDMV_HWEC = NO /etc/wanpipe/wanpipe2.conf --------------------------------------- [devices] wanpipe2 = WAN_AFT_TE1, Comment [interfaces] w2g1 = wanpipe2, , TDM_VOICE, Comment [wanpipe2] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 14 PCIBUS = 0 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 2 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 2 #TDMV_DCHAN = 16 #TDMV_HW_DTMF = YES #TDMV_HW_FAX_DETECT = NO [w2g1] ACTIVE_CH = ALL TDMV_HWEC = NO /etc/asterisk/chan_dahdi.conf ------------------------------------------- [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ss7type=itu signalling=ss7 ss7_called_nai=national ss7_calling_nai=national networkindicator=national_spare linkset=1 pointcode=2259 defaultdpc=2256 adjpointcode=2256 cicbeginswith=1 group=0 channel =>1-15,17-31 sigchan=16 ss7type=itu signalling=ss7 ss7_called_nai=national ss7_calling_nai=national networkindicator=national_spare linkset=2 pointcode=2260 defaultdpc=2256 adjpointcode=2256 sigchan=47 cicbeginswith=32 group=0 channel =>32-46,48-62 [root at in-tickets asterisk]# wanpipemon -i w1g1 -c Ta ***** w1g1: E1 Alarms (Framer) ***** ALOS: OFF | LOS: OFF RED: OFF | AIS: OFF LOF: OFF | RAI: OFF ***** w1g1: E1 Alarms (LIU) ***** Short Circuit: OFF Open Circuit: OFF Loss of Signal: OFF ***** w1g1: E1 Performance Monitoring Counters ***** Line Code Violation : 0 Far End Block Errors : 0 CRC4 Errors : 0 FAS Errors : 0 Rx Level : > -2.5db [root at in-tickets asterisk]# wanpipemon -i w2g1 -c Ta ***** w2g1: E1 Alarms (Framer) ***** ALOS: OFF | LOS: OFF RED: OFF | AIS: OFF LOF: OFF | RAI: OFF ***** w2g1: E1 Alarms (LIU) ***** Short Circuit: OFF Open Circuit: OFF Loss of Signal: OFF ***** w2g1: E1 Performance Monitoring Counters ***** Line Code Violation : 0 Far End Block Errors : 0 CRC4 Errors : 0 FAS Errors : 0 Rx Level : > -2.5db Kindly help me out. Best Regards, Junaid -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20091216/b16a0217/attachment.htm
|