At Sat, 6 Jun 2009 00:20:18 -0300, Emilio López wrote: > > Takashi, were you able to have a look at it? Sorry, no time. > Any idea on what might be going > on? I guess this is an easy to fix issue, as it worked with the old mode, the > channel might just need registering or something. You can try another one, the recently added model acer-aspire-8930g. Takashi > > Thanks! > > 2009/5/29 Emilio López <buhitoescolar@xxxxxxxxx> > > 2009/5/27 Takashi Iwai <tiwai@xxxxxxx> > > At Wed, 27 May 2009 22:54:09 +0200, > I wrote: > > > > At Wed, 27 May 2009 16:27:00 -0300, > > Emilio López wrote: > > > > > > Did my last email arrive? Any idea on what might be going on? > > > > Sorry, no time for this right now. > > It's usually just a missing channel connection or the lack of > > the corresponding amp control. In most cases, it's trivial if > someone > > with a knowledge of HD-audio spec sees it... > > Just took a quick look now, I found that you didn't unmute "Side > Playback Switch" in the disabled case. Do you mean that as > "disabled"? > > Disabled = Muted = Off, Enabled = Unmuted = On. So sound works on enabled, > doesn't work on disabled. > > I assume that these files are from the "old" driver with the bass > working as Side volume. Is it correct? > > Yes > > thanks, > > Takashi > > Thanks for having a look at it :) > > Emilio > > > > > Takashi > > > > > > > > Emilio > > > > > > 2009/5/24 Emilio López <buhitoescolar@xxxxxxxxx> > > > > > > Well, it seems my last email was too heavy with the 4 files > attached. I > > > have uploaded them to drop.io, here is the link: http:// > drop.io/ > > > alsaonaceraspire6930 > > > > > > Thanks! > > > > > > 2009/5/23 Emilio López <buhitoescolar@xxxxxxxxx> > > > > > > Here you are, I ran alsa-info.sh in the old alsa (with > model=acer) and > > > saved the output of the script when side was enabled and > disabled, > > > with volumes 0 and 100. Hope you can work out the problem > with this, > > > do not hesitate to ask for more debug info if you need. > > > > > > Thanks for all! > > > > > > Emilio > > > > > > PS: On my previous email (cited below) I wrote "Mic > sensing" > > > incorrectly, I wanted to write "headphones sensing". > > > > > > 2009/5/23 Takashi Iwai <tiwai@xxxxxxx> > > > > > > At Sat, 23 May 2009 12:19:12 -0300, > > > Emilio López wrote: > > > > > > > > I reinstalled 1.0.20 today and almost everything > started working > > > when I set > > > > model=acer-aspire-4930g. Mic sensing works, my mic > now records > > > too. But my > > > > bass does not, and I cannot control it with "Side" > anymore. > > > > > > > > Any idea on how to fix it? The audio setup for this > laptop will > > > be fully > > > > working when I get the bass to play once again. > > > > > > Could you check with the older version and what "Side" > control > > > changes > > > in hd-audio codec registers? You can just get > alsa-info.sh output > > > before and after changing the "Side" control value. > > > > > > thanks, > > > > > > Takashi > > > > > > > > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
