At Wed, 27 May 2009 16:27:00 -0300, Emilio López wrote: > > Did my last email arrive? Any idea on what might be going on? Sorry, no time for this right now. It's usually just a missing channel connection or the lack of the corresponding amp control. In most cases, it's trivial if someone with a knowledge of HD-audio spec sees it... Takashi > > Emilio > > 2009/5/24 Emilio López <buhitoescolar@xxxxxxxxx> > > Well, it seems my last email was too heavy with the 4 files attached. I > have uploaded them to drop.io, here is the link: http://drop.io/ > alsaonaceraspire6930 > > Thanks! > > 2009/5/23 Emilio López <buhitoescolar@xxxxxxxxx> > > Here you are, I ran alsa-info.sh in the old alsa (with model=acer) and > saved the output of the script when side was enabled and disabled, > with volumes 0 and 100. Hope you can work out the problem with this, > do not hesitate to ask for more debug info if you need. > > Thanks for all! > > Emilio > > PS: On my previous email (cited below) I wrote "Mic sensing" > incorrectly, I wanted to write "headphones sensing". > > 2009/5/23 Takashi Iwai <tiwai@xxxxxxx> > > At Sat, 23 May 2009 12:19:12 -0300, > Emilio López wrote: > > > > I reinstalled 1.0.20 today and almost everything started working > when I set > > model=acer-aspire-4930g. Mic sensing works, my mic now records > too. But my > > bass does not, and I cannot control it with "Side" anymore. > > > > Any idea on how to fix it? The audio setup for this laptop will > be fully > > working when I get the bass to play once again. > > Could you check with the older version and what "Side" control > changes > in hd-audio codec registers? You can just get alsa-info.sh output > before and after changing the "Side" control value. > > thanks, > > Takashi > > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
