Well, it seems my last email was too heavy with the 4 files attached. I have uploaded them to drop.io, here is the link: http://drop.io/alsaonaceraspire6930 Thanks! 2009/5/23 Emilio López <buhitoescolar@xxxxxxxxx> > Here you are, I ran alsa-info.sh in the old alsa (with model=acer) and > saved the output of the script when side was enabled and disabled, with > volumes 0 and 100. Hope you can work out the problem with this, do not > hesitate to ask for more debug info if you need. > > Thanks for all! > > Emilio > > PS: On my previous email (cited below) I wrote "Mic sensing" incorrectly, I > wanted to write "headphones sensing". > > 2009/5/23 Takashi Iwai <tiwai@xxxxxxx> > > At Sat, 23 May 2009 12:19:12 -0300, >> Emilio López wrote: >> > >> > I reinstalled 1.0.20 today and almost everything started working when I >> set >> > model=acer-aspire-4930g. Mic sensing works, my mic now records too. But >> my >> > bass does not, and I cannot control it with "Side" anymore. >> > >> > Any idea on how to fix it? The audio setup for this laptop will be fully >> > working when I get the bass to play once again. >> >> Could you check with the older version and what "Side" control changes >> in hd-audio codec registers? You can just get alsa-info.sh output >> before and after changing the "Side" control value. >> >> >> thanks, >> >> Takashi >> > > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
