Takashi, were you able to have a look at it? Any idea on what might be going on? I guess this is an easy to fix issue, as it worked with the old mode, the channel might just need registering or something. Thanks! 2009/5/29 Emilio López <buhitoescolar@xxxxxxxxx> > > > 2009/5/27 Takashi Iwai <tiwai@xxxxxxx> > >> At Wed, 27 May 2009 22:54:09 +0200, >> I wrote: >> > >> > At Wed, 27 May 2009 16:27:00 -0300, >> > Emilio López wrote: >> > > >> > > Did my last email arrive? Any idea on what might be going on? >> > >> > Sorry, no time for this right now. >> > It's usually just a missing channel connection or the lack of >> > the corresponding amp control. In most cases, it's trivial if someone >> > with a knowledge of HD-audio spec sees it... >> >> Just took a quick look now, I found that you didn't unmute "Side >> Playback Switch" in the disabled case. Do you mean that as >> "disabled"? > > > Disabled = Muted = Off, Enabled = Unmuted = On. So sound works on enabled, > doesn't work on disabled. > >> >> >> I assume that these files are from the "old" driver with the bass >> working as Side volume. Is it correct? > > > Yes > >> >> >> >> thanks, >> >> Takashi >> > > Thanks for having a look at it :) > > Emilio > > > > > >> >> >> > Takashi >> > >> > > >> > > Emilio >> > > >> > > 2009/5/24 Emilio López <buhitoescolar@xxxxxxxxx> >> > > >> > > Well, it seems my last email was too heavy with the 4 files >> attached. I >> > > have uploaded them to drop.io, here is the link: http://drop.io/ >> > > alsaonaceraspire6930 >> > > >> > > Thanks! >> > > >> > > 2009/5/23 Emilio López <buhitoescolar@xxxxxxxxx> >> > > >> > > Here you are, I ran alsa-info.sh in the old alsa (with >> model=acer) and >> > > saved the output of the script when side was enabled and >> disabled, >> > > with volumes 0 and 100. Hope you can work out the problem with >> this, >> > > do not hesitate to ask for more debug info if you need. >> > > >> > > Thanks for all! >> > > >> > > Emilio >> > > >> > > PS: On my previous email (cited below) I wrote "Mic sensing" >> > > incorrectly, I wanted to write "headphones sensing". >> > > >> > > 2009/5/23 Takashi Iwai <tiwai@xxxxxxx> >> > > >> > > At Sat, 23 May 2009 12:19:12 -0300, >> > > Emilio López wrote: >> > > > >> > > > I reinstalled 1.0.20 today and almost everything started >> working >> > > when I set >> > > > model=acer-aspire-4930g. Mic sensing works, my mic now >> records >> > > too. But my >> > > > bass does not, and I cannot control it with "Side" >> anymore. >> > > > >> > > > Any idea on how to fix it? The audio setup for this >> laptop will >> > > be fully >> > > > working when I get the bass to play once again. >> > > >> > > Could you check with the older version and what "Side" >> control >> > > changes >> > > in hd-audio codec registers? You can just get >> alsa-info.sh output >> > > before and after changing the "Side" control value. >> > > >> > > thanks, >> > > >> > > Takashi >> > > >> > > >> > > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
