On Mon, 27 Nov 2023 10:15:05 +0100, Julian Sikorski wrote: > > Am 27.11.23 um 09:11 schrieb Takashi Iwai: > > On Sun, 26 Nov 2023 10:12:56 +0100, > > Julian Sikorski wrote: > >> > >> Am 17.11.23 um 15:31 schrieb Julian Sikorski: > >>> Am 13.12.2020 um 10:51 schrieb Julian Sikorski: > >>>> Hi list, > >>>> > >>>> Yamaha YIT-W12TX is a USB dongle which allows to transmit audio > >>>> from PC to the YSP-4300 sound bar [1][2]. While it is quite old and > >>>> no longer sold, I recently tried to make it work under > >>>> linux. Unfortunately, it did not work: > >>>> > >>>> [ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using > >>>> ehci-pci > >>>> [ 3676.445995] usb 2-1.1: config 1 has an invalid interface number: > >>>> 4 but max is 3 > >>>> [ 3676.446001] usb 2-1.1: config 1 has no interface number 2 > >>>> [ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499, > >>>> idProduct=3108, bcdDevice= 1.00 > >>>> [ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1, > >>>> SerialNumber=0 > >>>> [ 3676.446679] usb 2-1.1: Product: YIT-W12TX > >>>> [ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp. > >>>> [ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0: > >>>> USB HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on > >>>> usb-0000:00:1d.0-1.1/input3 > >>>> [ 3676.450846] input: YAMAHA Corp. YIT-W12TX as > >>>> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34 > >>>> [ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB > >>>> HID v1.00 Device [YAMAHA Corp. YIT-W12TX] on > >>>> usb-0000:00:1d.0-1.1/input4 > >>>> [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1 > >>>> [ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for > >>>> control 2 (id 5) > >>>> [ 3676.676476] usbcore: registered new interface driver snd-usb-audio > >>>> [ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for > >>>> control 2 (id 5) > >>>> [ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for > >>>> control 2 (id 5) > >>>> [ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for > >>>> control 2 (id 5) > >>>> [ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for > >>>> control 2 (id 5) > >>>> [ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for > >>>> control 2 (id 5) > >>>> [ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for > >>>> control 2 (id 5) > >>>> [ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for > >>>> control 2 (id 5) > >>>> [ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for > >>>> control 2 (id 5) > >>>> [ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for > >>>> control 2 (id 5) > >>>> [ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> [ 3676.900672] usb 2-1.1: USB disconnect, device number 5 > >>>> [ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > >>>> > >>>> This is with kernel-5.9.13-200.fc33.x86_64 and > >>>> alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the > >>>> dongle works without any special drivers from Yamaha, everything > >>>> appears to be downloaded by Windows automatically, so I was hoping > >>>> the device could be made to work under Linux relatively easily. > >>>> > >>>> Best regards, > >>>> Julian > >>>> > >>>> [1] > >>>> https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/downloads.html#product-tabs > >>>> [2] > >>>> https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downloads.html#product-tabs > >>> > >>> Hello, > >>> > >>> 3 years later I am still hoping for getting the device working. I am > >>> on 6.5 kernel and Fedora 39. > >>> I am attaching Windows' driver details screenshot as well as the inf > >>> file used. > >>> Does USB audio driver under linux have any parameters I could try? > >>> > >>> Best regards, > >>> Julian > >> > >> Hi again, > >> > >> turns out that getting the sound out was easier than expected: > >> > >> options snd-usb-audio quirk_flags=0x1 > > > > And this alone helps to get the card working? > > Once after confirmation, we can add the quirk to the static table. > > > > Yes, no other changes were needed. I am on kernel 6.6.2 now. I have > been listening to music via the dongle for several hours yesterday and > today. Even s2idle is working. OK, then it's easy to apply the quirk. > >> One cosmetic issue remains: in pavucontrol I can see 3 configuration > >> options: > >> - Analog Stereo output > >> - Digital Stereo (IEC958) output > >> - Pro Audio > >> The first and the third one work normally whereas digital stereo > >> output very quiet audio only. > >> By contrast, both my built-in audio cards (AMD Renoir HDMI and analog > >> output) only have two options: > >> - Play HiFi quality Music > >> - Pro Audio > >> Is this expected? > > > > When the device provides multiple outputs, yes, it's a sort of default > > setup. Different boards may have different own UCM configs to > > override the default. > > Check each output and verify what actual I/O they correspond. > > > > Well, the dongle does not have any physical outputs. Input-wise, it > can be connected to a PC via USB or to an old iPod/iPhone via the > 30-pin dock connector. > As far as output is concerned, the dongle connects wirelessly, via a > proprietary AirWired protocol, to the Yamaha sound bar and its > accompanying wireless subwoofer. Analog and pro output selection > produce reasonably loud sound on the soundbar, in line with other > inputs like FM radio, analog input or HDMI. Digital output, on the > other hand, produces barely audible volume level. While it can be > adjusted with the volume setting on the sound bar, the level needs to > be so high that it would be unbearably loud for other inputs. Could you give alsa-info.sh outputs? The device may have multiple I/O endpoints that end up with multiple PCM streams for som purpose. thanks, Takashi