Am 13.12.2020 um 10:51 schrieb Julian Sikorski:
Hi list,
Yamaha YIT-W12TX is a USB dongle which allows to transmit audio from PC
to the YSP-4300 sound bar [1][2]. While it is quite old and no longer
sold, I recently tried to make it work under linux. Unfortunately, it
did not work:
[ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using ehci-pci
[ 3676.445995] usb 2-1.1: config 1 has an invalid interface number: 4
but max is 3
[ 3676.446001] usb 2-1.1: config 1 has no interface number 2
[ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499,
idProduct=3108, bcdDevice= 1.00
[ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1,
SerialNumber=0
[ 3676.446679] usb 2-1.1: Product: YIT-W12TX
[ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp.
[ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0: USB
HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input3
[ 3676.450846] input: YAMAHA Corp. YIT-W12TX as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34
[ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB HID
v1.00 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input4
[ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1
[ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for control 2
(id 5)
[ 3676.676476] usbcore: registered new interface driver snd-usb-audio
[ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for control 2
(id 5)
[ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for control 2
(id 5)
[ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for control 2
(id 5)
[ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for control 2
(id 5)
[ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for control 2
(id 5)
[ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for control 2
(id 5)
[ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for control 2
(id 5)
[ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for control 2
(id 5)
[ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for control 2
(id 5)
[ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.900672] usb 2-1.1: USB disconnect, device number 5
[ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
This is with kernel-5.9.13-200.fc33.x86_64 and
alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the dongle
works without any special drivers from Yamaha, everything appears to be
downloaded by Windows automatically, so I was hoping the device could be
made to work under Linux relatively easily.
Best regards,
Julian
[1]
https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/downloads.html#product-tabs
[2]
https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downloads.html#product-tabs
Hello,
3 years later I am still hoping for getting the device working. I am on
6.5 kernel and Fedora 39.
I am attaching Windows' driver details screenshot as well as the inf
file used.
Does USB audio driver under linux have any parameters I could try?
Best regards,
Julian
ÿþ; C o p y r i g h t ( c ) 2 0 0 4 M i c r o s o f t C o r p o r a t i o n
[ V e r s i o n ]
S i g n a t u r e = "