Am 27.11.23 um 09:11 schrieb Takashi Iwai:
On Sun, 26 Nov 2023 10:12:56 +0100,
Julian Sikorski wrote:
Am 17.11.23 um 15:31 schrieb Julian Sikorski:
Am 13.12.2020 um 10:51 schrieb Julian Sikorski:
Hi list,
Yamaha YIT-W12TX is a USB dongle which allows to transmit audio
from PC to the YSP-4300 sound bar [1][2]. While it is quite old and
no longer sold, I recently tried to make it work under
linux. Unfortunately, it did not work:
[ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using
ehci-pci
[ 3676.445995] usb 2-1.1: config 1 has an invalid interface number:
4 but max is 3
[ 3676.446001] usb 2-1.1: config 1 has no interface number 2
[ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499,
idProduct=3108, bcdDevice= 1.00
[ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1,
SerialNumber=0
[ 3676.446679] usb 2-1.1: Product: YIT-W12TX
[ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp.
[ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0:
USB HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on
usb-0000:00:1d.0-1.1/input3
[ 3676.450846] input: YAMAHA Corp. YIT-W12TX as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34
[ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB
HID v1.00 Device [YAMAHA Corp. YIT-W12TX] on
usb-0000:00:1d.0-1.1/input4
[ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1
[ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for
control 2 (id 5)
[ 3676.676476] usbcore: registered new interface driver snd-usb-audio
[ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for
control 2 (id 5)
[ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for
control 2 (id 5)
[ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for
control 2 (id 5)
[ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for
control 2 (id 5)
[ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for
control 2 (id 5)
[ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for
control 2 (id 5)
[ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for
control 2 (id 5)
[ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for
control 2 (id 5)
[ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for
control 2 (id 5)
[ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
[ 3676.900672] usb 2-1.1: USB disconnect, device number 5
[ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
This is with kernel-5.9.13-200.fc33.x86_64 and
alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the
dongle works without any special drivers from Yamaha, everything
appears to be downloaded by Windows automatically, so I was hoping
the device could be made to work under Linux relatively easily.
Best regards,
Julian
[1]
https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/downloads.html#product-tabs
[2]
https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downloads.html#product-tabs
Hello,
3 years later I am still hoping for getting the device working. I am
on 6.5 kernel and Fedora 39.
I am attaching Windows' driver details screenshot as well as the inf
file used.
Does USB audio driver under linux have any parameters I could try?
Best regards,
Julian
Hi again,
turns out that getting the sound out was easier than expected:
options snd-usb-audio quirk_flags=0x1
And this alone helps to get the card working?
Once after confirmation, we can add the quirk to the static table.
Yes, no other changes were needed. I am on kernel 6.6.2 now. I have been
listening to music via the dongle for several hours yesterday and today.
Even s2idle is working.
One cosmetic issue remains: in pavucontrol I can see 3 configuration
options:
- Analog Stereo output
- Digital Stereo (IEC958) output
- Pro Audio
The first and the third one work normally whereas digital stereo
output very quiet audio only.
By contrast, both my built-in audio cards (AMD Renoir HDMI and analog
output) only have two options:
- Play HiFi quality Music
- Pro Audio
Is this expected?
When the device provides multiple outputs, yes, it's a sort of default
setup. Different boards may have different own UCM configs to
override the default.
Check each output and verify what actual I/O they correspond.
Well, the dongle does not have any physical outputs. Input-wise, it can
be connected to a PC via USB or to an old iPod/iPhone via the 30-pin
dock connector.
As far as output is concerned, the dongle connects wirelessly, via a
proprietary AirWired protocol, to the Yamaha sound bar and its
accompanying wireless subwoofer. Analog and pro output selection produce
reasonably loud sound on the soundbar, in line with other inputs like FM
radio, analog input or HDMI. Digital output, on the other hand, produces
barely audible volume level. While it can be adjusted with the volume
setting on the sound bar, the level needs to be so high that it would be
unbearably loud for other inputs.
Takashi
Best regards,
Julian