Re: Yamaha YIT-W12TX not working

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 26 Nov 2023 10:12:56 +0100,
Julian Sikorski wrote:
> 
> Am 17.11.23 um 15:31 schrieb Julian Sikorski:
> > Am 13.12.2020 um 10:51 schrieb Julian Sikorski:
> >> Hi list,
> >> 
> >> Yamaha YIT-W12TX is a USB dongle which allows to transmit audio
> >> from PC to the YSP-4300 sound bar [1][2]. While it is quite old and
> >> no longer sold, I recently tried to make it work under
> >> linux. Unfortunately, it did not work:
> >> 
> >> [ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using
> >> ehci-pci
> >> [ 3676.445995] usb 2-1.1: config 1 has an invalid interface number:
> >> 4 but max is 3
> >> [ 3676.446001] usb 2-1.1: config 1 has no interface number 2
> >> [ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499,
> >> idProduct=3108, bcdDevice= 1.00
> >> [ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1,
> >> SerialNumber=0
> >> [ 3676.446679] usb 2-1.1: Product: YIT-W12TX
> >> [ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp.
> >> [ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0:
> >> USB HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on
> >> usb-0000:00:1d.0-1.1/input3
> >> [ 3676.450846] input: YAMAHA Corp. YIT-W12TX as
> >> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34
> >> [ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB
> >> HID v1.00 Device [YAMAHA Corp. YIT-W12TX] on
> >> usb-0000:00:1d.0-1.1/input4
> >> [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1
> >> [ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for
> >> control 2 (id 5)
> >> [ 3676.676476] usbcore: registered new interface driver snd-usb-audio
> >> [ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for
> >> control 2 (id 5)
> >> [ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for
> >> control 2 (id 5)
> >> [ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for
> >> control 2 (id 5)
> >> [ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for
> >> control 2 (id 5)
> >> [ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for
> >> control 2 (id 5)
> >> [ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for
> >> control 2 (id 5)
> >> [ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for
> >> control 2 (id 5)
> >> [ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for
> >> control 2 (id 5)
> >> [ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for
> >> control 2 (id 5)
> >> [ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> [ 3676.900672] usb 2-1.1: USB disconnect, device number 5
> >> [ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
> >> 
> >> This is with kernel-5.9.13-200.fc33.x86_64 and
> >> alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the
> >> dongle works without any special drivers from Yamaha, everything
> >> appears to be downloaded by Windows automatically, so I was hoping
> >> the device could be made to work under Linux relatively easily.
> >> 
> >> Best regards,
> >> Julian
> >> 
> >> [1]
> >> https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/downloads.html#product-tabs
> >> [2]
> >> https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downloads.html#product-tabs
> > 
> > Hello,
> > 
> > 3 years later I am still hoping for getting the device working. I am
> > on 6.5 kernel and Fedora 39.
> > I am attaching Windows' driver details screenshot as well as the inf
> > file used.
> > Does USB audio driver under linux have any parameters I could try?
> > 
> > Best regards,
> > Julian
> 
> Hi again,
> 
> turns out that getting the sound out was easier than expected:
> 
> options snd-usb-audio quirk_flags=0x1

And this alone helps to get the card working?
Once after confirmation, we can add the quirk to the static table.

> One cosmetic issue remains: in pavucontrol I can see 3 configuration
> options:
> - Analog Stereo output
> - Digital Stereo (IEC958) output
> - Pro Audio
> The first and the third one work normally whereas digital stereo
> output very quiet audio only.
> By contrast, both my built-in audio cards (AMD Renoir HDMI and analog
> output) only have two options:
> - Play HiFi quality Music
> - Pro Audio
> Is this expected?

When the device provides multiple outputs, yes, it's a sort of default
setup.  Different boards may have different own UCM configs to
override the default.
Check each output and verify what actual I/O they correspond.


Takashi



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux