After further investigation I have found drivers from realtek
(ftp://202.65.194.211/pc/audio/realtek-linux-audiopack-4.05e.tar.bz2 )
which had support for ALC660 (vd?) codec. Which is quite similar to alv861vd,
but there is no datasheet available. So I examined that driver and added 660
to my patch, using 861vd code, and changing few things. Also correcting some
errors in realtek's code, as it was copy-pasted from 883 code, and for
example didn't muted correct channels at startup.
This patch is instead of previous one I have sent, not after and adds support
for 861vd and 660vd codecs.
Could anybody tell me if this patch is of any value?
Or maybe someone has similar device and could test if it works with his
hardware as well?
P.S. I called the new codec 660-VD, because the only occurence of 660 in
realtek's webpage is ALC660-VD in some press info. And ALC660 is already
used, as a variant of 861 codec. The codec added by me is similar to 861vd,
not 861, so I think 660vd is a good name for that :)
--- a/pci/hda/patch_realtek.c 2007-02-01 18:00:44.000000000 +0100
+++ b/pci/hda/patch_realtek.c 2007-02-02 06:36:34.000000000 +0100
@@ -94,6 +94,13 @@
ALC262_MODEL_LAST /* last tag */
};
+/* ALC660VD models */
+enum {
+ ALC660VD_BASIC,
+ ALC660VD_AUTO,
+ ALC660VD_MODEL_LAST,
+};
+
/* ALC861 models */
enum {
ALC861_3ST,
@@ -108,6 +115,13 @@
ALC861_MODEL_LAST,
};
+/* ALC861-VD models */
+enum {
+ ALC861VD_BASIC,
+ ALC861VD_AUTO,
+ ALC861VD_MODEL_LAST,
+};
+
/* ALC882 models */
enum {
ALC882_3ST_DIG,
@@ -7925,20 +7939,768 @@
}
/*
+ * ALC861-VD support
+ *
+ * Based on ALC882
+ *
+ * In addition, an independent DAC
+ */
+#define ALC861VD_DIGOUT_NID 0x06
+
+static hda_nid_t alc861vd_dac_nids[4] = {
+ /* front, surr, clfe, side surr */
+ 0x02, 0x03, 0x04, 0x05
+};
+
+static hda_nid_t alc861vd_adc_nids[1] = {
+ /* Only one ADC */
+ 0x09,
+};
+
+/* input MUX */
+/* FIXME: should be a matrix-type input source selection */
+static struct hda_input_mux alc861vd_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x1 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
+
+#define alc861vd_mux_enum_info alc_mux_enum_info
+#define alc861vd_mux_enum_get alc_mux_enum_get
+
+static int alc861vd_mux_enum_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ const struct hda_input_mux *imux = spec->input_mux;
+ unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+ static hda_nid_t capture_mixers[1] = { 0x22 };
+ hda_nid_t nid = capture_mixers[adc_idx];
+ unsigned int *cur_val = &spec->cur_mux[adc_idx];
+ unsigned int i, idx;
+
+ idx = ucontrol->value.enumerated.item[0];
+ if (idx >= imux->num_items)
+ idx = imux->num_items - 1;
+ if (*cur_val == idx && ! codec->in_resume)
+ return 0;
+ for (i = 0; i < imux->num_items; i++) {
+ unsigned int v = (i == idx) ? 0x7000 : 0x7080;
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ v | (imux->items[i].index << 8));
+ }
+ *cur_val = idx;
+ return 1;
+}
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc861vd_sixstack_ch6_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
+ { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { } /* end */
+};
+
+/*
+ * 8ch mode
+ */
+static struct hda_verb alc861vd_sixstack_ch8_init[] = {
+ { 0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { } /* end */
+};
+
+static struct hda_channel_mode alc861vd_sixstack_modes[2] = {
+ { 6, alc861vd_sixstack_ch6_init },
+ { 8, alc861vd_sixstack_ch8_init },
+};
+
+/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
+ * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
+ */
+static struct snd_kcontrol_new alc861vd_base_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x04, 2, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
+ HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Side Playback Volume", 0x05, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
+ /* Why there is no Line2/HP entry? (0x03 in 0x0b) */
+
+ { } /* end */
+};
+
+static struct snd_kcontrol_new alc861vd_chmode_mixer[] = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Channel Mode",
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
+ },
+ { } /* end */
+};
+
+static struct hda_verb alc861vd_init_verbs[] = {
+ /* Front mixer: unmute input/output amp left and right (volume = 0) */
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Rear mixer */
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* CLFE mixer */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Side mixer */
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+
+ /* Front Pin: output 0 (0x0c) */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* Rear Pin: output 1 (0x0d) */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+ /* CLFE Pin: output 2 (0x0e) */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
+ /* Side Pin: output 3 (0x0f) */
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
+
+ /* Mic (rear) pin: input vref at 80% */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Front Mic pin: input vref at 80% */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line In pin: input */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line-2 In: Headphone output (output 0 - 0x0c) */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* CD pin widget for input */
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* ADC1: mute amp left and right */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ { }
+};
+
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc861vd_auto_init_verbs[] = {
+ /*
+ * Unmute ADC0 and set the default input to mic-in
+ */
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+ * mixer widget
+ * Note: PASD motherboards uses the Line In 2 as the input for front panel
+ * mic (mic 2)
+ */
+ /* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+
+ /*
+ * Set up output mixers (0x02 - 0x05)
+ */
+ /* set vol=0 to output mixers */
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ /* set up input amps for analog loopback */
+ /* Amp Indices: DAC = 0, mixer = 1 */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))},
+
+ { }
+};
+
+static struct snd_kcontrol_new alc861vd_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
+
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* The multiple "Capture Source" controls confuse alsamixer
+ * So call somewhat different..
+ *FIXME: the controls appear in the "playback" view!
+ */
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 1,
+ .info = alc861vd_mux_enum_info,
+ .get = alc861vd_mux_enum_get,
+ .put = alc861vd_mux_enum_put,
+ },
+ { } /* end */
+};
+
+/* pcm configuration: identiacal with ALC880 */
+#define alc861vd_pcm_analog_playback alc880_pcm_analog_playback
+#define alc861vd_pcm_analog_capture alc880_pcm_analog_capture
+#define alc861vd_pcm_digital_playback alc880_pcm_digital_playback
+#define alc861vd_pcm_digital_capture alc880_pcm_digital_capture
+
+/*
+ * configuration and preset
+ */
+static const char *alc861vd_models[ALC861VD_MODEL_LAST] = {
+ [ALC861VD_BASIC] = "basic",
+ [ALC861VD_AUTO] = "auto",
+};
+
+static struct snd_pci_quirk alc861vd_cfg_tbl[] = {
+ {}
+};
+
+static struct alc_config_preset alc861vd_presets[] = {
+ [ALC861VD_BASIC] = {
+ .mixers = { alc861vd_base_mixer, alc861vd_chmode_mixer },
+ .init_verbs = { alc861vd_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc861vd_dac_nids),
+ .dac_nids = alc861vd_dac_nids,
+ .dig_out_nid = ALC861VD_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc861vd_sixstack_modes),
+ .channel_mode = alc861vd_sixstack_modes,
+ .input_mux = &alc861vd_capture_source,
+ },
+};
+
+
+/*
+ * BIOS auto configuration
+ */
+static void alc861vd_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid,
+ int pin_type, int dac_idx)
+{
+ /* set as output */
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, pin_type);
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+}
+
+static void alc861vd_auto_init_multi_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i <= HDA_SIDE; i++) {
+ hda_nid_t nid = spec->autocfg.line_out_pins[i];
+ if (nid)
+ alc861vd_auto_set_output_and_unmute(codec, nid, PIN_OUT, i);
+ }
+}
+
+
+static void alc861vd_auto_init_hp_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t pin;
+
+ pin = spec->autocfg.hp_pins[0];
+ if (pin) /* connect to front */
+ alc861vd_auto_set_output_and_unmute(codec, pin, PIN_HP, 0); /* use dac 0 */
+}
+
+#define alc861vd_is_input_pin(nid) alc880_is_input_pin(nid)
+#define ALC861VD_PIN_CD_NID ALC880_PIN_CD_NID
+
+static void alc861vd_auto_init_analog_input(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ hda_nid_t nid = spec->autocfg.input_pins[i];
+ if (alc861vd_is_input_pin(nid)) {
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ i <= AUTO_PIN_FRONT_MIC ? PIN_VREF80 : PIN_IN);
+ if (nid != ALC861VD_PIN_CD_NID)
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_OUT_MUTE);
+ }
+ }
+}
+
+#define alc861vd_idx_to_mixer_vol(nid) ((nid) + 0x02)
+#define alc861vd_idx_to_mixer_switch(nid) ((nid) + 0x0c)
+
+/* add playback controls from the parsed DAC table */
+/* Based on ALC880 version. But ALC861VD has separate,
+ * different NIDs for mute/unmute switch and volume control */
+static int alc861vd_auto_create_multi_out_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
+{
+ char name[32];
+ static const char *chname[4] = { "Front", "Surround", "CLFE", "Side" };
+ hda_nid_t nid_v, nid_s;
+ int i, err;
+
+ for (i = 0; i < cfg->line_outs; i++) {
+ if (! spec->multiout.dac_nids[i])
+ continue;
+ nid_v = alc861vd_idx_to_mixer_vol(alc880_dac_to_idx(spec->multiout.dac_nids[i]));
+ nid_s = alc861vd_idx_to_mixer_switch(alc880_dac_to_idx(spec->multiout.dac_nids[i]));
+
+ if (i == 2) {
+ /* Center/LFE */
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Center Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid_v, 1, 0, HDA_OUTPUT))) < 0)
+ return err;
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "LFE Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid_v, 2, 0, HDA_OUTPUT))) < 0)
+ return err;
+ if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "Center Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid_s, 1, 2, HDA_INPUT))) < 0)
+ return err;
+ if ((err = add_control(spec, ALC_CTL_BIND_MUTE, "LFE Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid_s, 2, 2, HDA_INPUT))) < 0)
+ return err;
+ } else {
+ sprintf(name, "%s Playback Volume", chname[i]);
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(nid_v, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ sprintf(name, "%s Playback Switch", chname[i]);
+ if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid_v, 3, 2, HDA_INPUT))) < 0)
+ return err;
+ }
+ }
+ return 0;
+}
+
+/* add playback controls for speaker and HP outputs */
+/* Based on ALC880 version. But ALC861VD has separate,
+ * different NIDs for mute/unmute switch and volume control */
+static int alc861vd_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin,
+ const char *pfx)
+{
+ hda_nid_t nid_v, nid_s;
+ int err;
+ char name[32];
+
+ if (! pin)
+ return 0;
+
+ if (alc880_is_fixed_pin(pin)) {
+ nid_v = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
+ /* specify the DAC as the extra output */
+ if (! spec->multiout.hp_nid)
+ spec->multiout.hp_nid = nid_v;
+ else
+ spec->multiout.extra_out_nid[0] = nid_v;
+ /* control HP volume/switch on the output mixer amp */
+ nid_v = alc861vd_idx_to_mixer_vol(alc880_fixed_pin_idx(pin));
+ nid_s = alc861vd_idx_to_mixer_switch(alc880_fixed_pin_idx(pin));
+
+ sprintf(name, "%s Playback Volume", pfx);
+ if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(nid_v, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ sprintf(name, "%s Playback Switch", pfx);
+ if ((err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid_s, 3, 2, HDA_INPUT))) < 0)
+ return err;
+ } else if (alc880_is_multi_pin(pin)) {
+ /* set manual connection */
+ /* we have only a switch on HP-out PIN */
+ sprintf(name, "%s Playback Switch", pfx);
+ if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT))) < 0)
+ return err;
+ }
+ return 0;
+}
+
+/* Based on ALC880 version - had to change it to override alc880_auto_create_extra_out
+ * and alc880_auto_create_multi_out_ctls */
+/* parse the BIOS configuration and set up the alc_spec */
+/* return 1 if successful, 0 if the proper config is not found, or a negative error code */
+static int alc861vd_parse_auto_config(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int err;
+ static hda_nid_t alc861vd_ignore[] = { 0x1d, 0 };
+
+ if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc861vd_ignore)) < 0)
+ return err;
+ if (! spec->autocfg.line_outs)
+ return 0; /* can't find valid BIOS pin config */
+
+ if ((err = alc880_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 ||
+ (err = alc861vd_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
+ (err = alc861vd_auto_create_extra_out(spec,
+ spec->autocfg.speaker_pins[0],
+ "Speaker")) < 0 ||
+ (err = alc861vd_auto_create_extra_out(spec, spec->autocfg.hp_pins[0],
+ "Headphone")) < 0 ||
+ (err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
+ return err;
+
+ spec->multiout.max_channels = spec->multiout.num_dacs * 2;
+
+ if (spec->autocfg.dig_out_pin)
+ spec->multiout.dig_out_nid = ALC861VD_DIGOUT_NID;
+/*
+ * if (spec->autocfg.dig_in_pin)
+ * spec->dig_in_nid = ALC861VD_DIGIN_NID;
+ */
+
+ if (spec->kctl_alloc)
+ spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+
+ spec->init_verbs[spec->num_init_verbs++] = alc861vd_auto_init_verbs;
+
+ spec->num_mux_defs = 1;
+ spec->input_mux = &spec->private_imux;
+
+ return 1;
+}
+
+/* additional initialization for auto-configuration model */
+static void alc861vd_auto_init(struct hda_codec *codec)
+{
+ alc861vd_auto_init_multi_out(codec);
+ alc861vd_auto_init_hp_out(codec);
+ alc861vd_auto_init_analog_input(codec);
+}
+
+static int patch_alc861vd(struct hda_codec *codec)
+{
+ struct alc_spec *spec;
+ int err, board_config;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (spec == NULL)
+ return -ENOMEM;
+
+ codec->spec = spec;
+
+ board_config = snd_hda_check_board_config(codec, ALC861VD_MODEL_LAST,
+ alc861vd_models,
+ alc861vd_cfg_tbl);
+
+ if (board_config < 0 || board_config >= ALC861VD_MODEL_LAST) {
+ printk(KERN_INFO "hda_codec: Unknown model for ALC861VD, "
+ "trying auto-probe from BIOS...\n");
+ board_config = ALC861VD_AUTO;
+ }
+
+ if (board_config == ALC861VD_AUTO) {
+ /* automatic parse from the BIOS config */
+ err = alc861vd_parse_auto_config(codec);
+ if (err < 0) {
+ alc_free(codec);
+ return err;
+ } else if (! err) {
+ printk(KERN_INFO
+ "hda_codec: Cannot set up configuration "
+ "from BIOS. Using base mode...\n");
+ board_config = ALC861VD_BASIC;
+ }
+ }
+
+ if (board_config != ALC861VD_AUTO)
+ setup_preset(spec, &alc861vd_presets[board_config]);
+
+ spec->stream_name_analog = "ALC861VD Analog";
+ spec->stream_analog_playback = &alc861vd_pcm_analog_playback;
+ spec->stream_analog_capture = &alc861vd_pcm_analog_capture;
+
+ spec->stream_name_digital = "ALC861VD Digital";
+ spec->stream_digital_playback = &alc861vd_pcm_digital_playback;
+ spec->stream_digital_capture = &alc861vd_pcm_digital_capture;
+
+ spec->adc_nids = alc861vd_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids);
+
+ spec->mixers[spec->num_mixers] = alc861vd_capture_mixer;
+ spec->num_mixers++;
+
+ codec->patch_ops = alc_patch_ops;
+
+ if (board_config == ALC861VD_AUTO)
+ spec->init_hook = alc861vd_auto_init;
+
+ return 0;
+}
+
+/*
+ * ALC660VD support
+ *
+ * Based on ALC861VD
+ *
+ */
+static hda_nid_t alc660vd_dac_nids[3] = {
+ /* front, rear, clfe, rear_surr */
+ 0x02, 0x04, 0x03
+};
+
+static hda_nid_t alc660vd_adc_nids[1] = {
+ /* ADC1 */
+ 0x09,
+};
+
+
+static struct snd_kcontrol_new alc660vd_base_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+ { } /* end */
+};
+
+static struct hda_verb alc660vd_init_verbs[] = {
+ /* ADC1: mute amp left and right */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ /* Front mixer: unmute input/output amp left and right (volume = 0) */
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+
+ /* Rear mixer */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+
+ /* CLFE mixer */
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+
+ /* Front Pin: output 0 (0x0c) */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* Rear Pin: output 1 (0x0d) */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+ /* CLFE Pin: output 2 (0x0e) */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
+ /* Side Pin: output 3 (0x0f) */
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
+ /* Mic (rear) pin: input vref at 80% */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Front Mic pin: input vref at 80% */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line In pin: input */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line-2 In: Headphone output (output 0 - 0x0c) */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* CD pin widget for input */
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
+ { }
+};
+
+/*
+ * configuration and preset
+ */
+static const char *alc660vd_models[ALC660VD_MODEL_LAST] = {
+ [ALC660VD_BASIC] = "basic",
+ [ALC660VD_AUTO] = "auto",
+};
+
+static struct snd_pci_quirk alc660vd_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x10de, 0x03f0, "ALC660VD Basic", ALC660VD_BASIC),
+ SND_PCI_QUIRK(0x1019, 0xa88d, "ALC660VD Basic", ALC660VD_BASIC),
+ SND_PCI_QUIRK(0x1043, 0x0000, "Asus G1", ALC660VD_BASIC),
+ {}
+};
+
+static struct alc_config_preset alc660vd_presets[] = {
+ [ALC660VD_BASIC] = {
+ .mixers = { alc660vd_base_mixer },
+ .init_verbs = { alc660vd_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc660vd_dac_nids),
+ .dac_nids = alc660vd_dac_nids,
+ .dig_out_nid = ALC861VD_DIGOUT_NID,
+ .num_adc_nids = ARRAY_SIZE(alc660vd_adc_nids),
+ .adc_nids = alc660vd_adc_nids,
+ .num_channel_mode = ARRAY_SIZE(alc861vd_sixstack_modes),
+ .channel_mode = alc861vd_sixstack_modes,
+ .input_mux = &alc861vd_capture_source,
+ },
+};
+
+
+static int patch_alc660vd(struct hda_codec *codec)
+{
+ struct alc_spec *spec;
+ int err, board_config;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (spec == NULL)
+ return -ENOMEM;
+
+ codec->spec = spec;
+
+ board_config = snd_hda_check_board_config(codec, ALC660VD_MODEL_LAST,
+ alc660vd_models,
+ alc660vd_cfg_tbl);
+
+ if (board_config < 0 || board_config >= ALC660VD_MODEL_LAST) {
+ printk(KERN_INFO "hda_codec: Unknown model for ALC660-VD, "
+ "trying auto-probe from BIOS...\n");
+ board_config = ALC660VD_AUTO;
+ }
+
+ if (board_config == ALC660VD_AUTO) {
+ /* automatic parse from the BIOS config */
+ /* Automatic parsing - same as for 861vd */
+ err = alc861vd_parse_auto_config(codec);
+
+ if (err < 0) {
+ alc_free(codec);
+ return err;
+ } else if (! err) {
+ printk(KERN_INFO
+ "hda_codec: Cannot set up configuration "
+ "from BIOS. Using base mode...\n");
+ board_config = ALC660VD_BASIC;
+ }
+ }
+
+ if (board_config != ALC660VD_AUTO)
+ setup_preset(spec, &alc660vd_presets[board_config]);
+
+ spec->stream_name_analog = "ALC660VD Analog";
+ spec->stream_analog_playback = &alc861vd_pcm_analog_playback;
+ spec->stream_analog_capture = &alc861vd_pcm_analog_capture;
+
+ spec->stream_name_digital = "ALC660VD Digital";
+ spec->stream_digital_playback = &alc861vd_pcm_digital_playback;
+ spec->stream_digital_capture = &alc861vd_pcm_digital_capture;
+
+ spec->adc_nids = alc660vd_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc660vd_adc_nids);
+
+ spec->mixers[spec->num_mixers] = alc861vd_capture_mixer;
+ spec->num_mixers++;
+
+ codec->patch_ops = alc_patch_ops;
+
+ if (board_config == ALC660VD_AUTO)
+ spec->init_hook = alc861vd_auto_init;
+
+ return 0;
+}
+
+/*
* patch entries
*/
struct hda_codec_preset snd_hda_preset_realtek[] = {
{ .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 },
{ .id = 0x10ec0262, .name = "ALC262", .patch = patch_alc262 },
- { .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
+ { .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc660vd },
+ { .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660", .patch = patch_alc861 },
+ { .id = 0x10ec0861, .name = "ALC861", .patch = patch_alc861 },
+ { .id = 0x10ec0862, .name = "ALC861-VD", .patch = patch_alc861vd },
+ { .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
{ .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc883 },
{ .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
{ .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc883 },
- { .id = 0x10ec0861, .rev = 0x100300, .name = "ALC861",
- .patch = patch_alc861 },
- { .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
- .patch = patch_alc861 },
- { .id = 0x10ec0660, .name = "ALC660", .patch = patch_alc861 },
{} /* terminator */
};
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-devel
