Haven't tried using the bcm5700 yet, I believe the version I would be using is like 2.0.5. I'd rather get the tg3 to work, but we'll see, I can definitely just go with the bcm5700 for the kickstart, and then take it from there. --Nick -----Original Message----- From: arb.comms@xxxxxxxxxxx [mailto:arb.comms@xxxxxxxxxxx] Sent: Wednesday, July 17, 2002 6:30 PM To: kickstart-list@xxxxxxxxxx Subject: RE: Duplex Setting with Network Driver -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Worked with these, they can be a bit twitchy, you got the model number there ? yours a.r.b - -----Original Message----- From: kickstart-list-admin@xxxxxxxxxx [mailto:kickstart-list-admin@xxxxxxxxxx]On Behalf Of K . Spoon Sent: 16 July 2002 23:09 To: kickstart-list@xxxxxxxxxx Subject: Re: Duplex Setting with Network Driver On Fri, Jul 12, 2002 at 11:31:58PM -0400, Buro, Nicholas F wrote: > > Yes, it does seem to work without issues, so I will probably end up > using it on the kickstart disk, and then possibly use the tg3 > driver. Just drop something into %post like: perl -pi -e 's/bcm5700/tg3/g' /etc/modules.conf > Is the driver located on broadcom's site? I can't seem to find the > 2.2.27 version you mentioned. That would be very helpful to check > out, I wasn't aware that there was active development on the > broadcom one. Nope... apparently they (Broadcom) don't distribute any drivers and rely on their OEMs to handle it (ie, Dell, Compaq, whoever). You might want to try looking through the source to see if there's a developer's email addy you can try. Side note: just tried a kickstart of 7.3 with the 2.2.27 bcm5700 driver, and for some reason the card can't set up a defaultroute... so maybe that's not the best route to be going down. :-) - -- Kelley Spoon Main: 210-892-4000 Rackspace Managed Hosting Fax: 210-892-4329 112 East Pecan, Suite 600 Email: kspoon@xxxxxxxxxxxxx San Antonio, TX 78205 <http://www.rackspace.com> _______________________________________________ Kickstart-list mailing list Kickstart-list@xxxxxxxxxx https://listman.redhat.com/mailman/listinfo/kickstart-list -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com> iQA/AwUBPTXvyugCrEZ8sCYmEQKx8QCeIRlKoLdqb+wlqAqjNdJQf7mT8P4AoOZK 3NnbC7+BMetRrrQvP2tIfSN6 =Jaq1 -----END PGP SIGNATURE----- _______________________________________________ Kickstart-list mailing list Kickstart-list@xxxxxxxxxx https://listman.redhat.com/mailman/listinfo/kickstart-list ------------------------------------------------------------------------------ Notice: This e-mail message, together with any attachments, contains information of Merck & Co., Inc. (Whitehouse Station, New Jersey, USA) that may be confidential, proprietary copyrighted and/or legally privileged, and is intended solely for the use of the individual or entity named in this message. If you are not the intended recipient, and have received this message in error, please immediately return this by e-mail and then delete it. ==============================================================================
