On 09/25/16 22:15, fred roller wrote: > > [root@Jehovah Downloads]# dd > if=Fedora-Workstation-Live-x86_64-25_Alpha-2.iso of=/dev/sda1 bs=16M > dd: error writing '/dev/sda1': No space left on device > 32+0 records in > 31+0 records out > 524288000 bytes (524 MB, 500 MiB) copied, 1.26722 s, 414 MB/s > > > Lawrence, for installing based on the information above try: > > dd if=./Fedora-Workstation-Live-x86_64-25_Alpha-2.iso of=/dev/sda bs=1M > status=progress > > for your understanding... the "./" in front of the filename notes your > location to the system as "in my current directory" but irregardless the > illegal operand came from the space between the "=" and the "F" in your > second attempt. The first failure of running out of space is because dd > was directed to a partition sda1. Also, be sure this is your usb drive, > my experience is that sda is usually the hard drive. Broken down sda1 > is: "sd"=serial device,"a" [or b,c,d,e,f, etc] is the devices in Err, ah, sd=scsi disk. A long time ago, the ATA drivers (and Serial ATA driver) were re-written to use the same SCSI disk interface as SCSI disks were using. And, as it turns out, USB disks too. Thus, we have no more "hd" disks (where the "hd" stood for "hard disk"). Every disk is an "sd" these days. > sequence as discovered, "1" [or 2,3,4, etc] are the partitions on the > device. With that try the following command WITHOUT the usb plugged in: > > ls /dev/sd* > > which should give you something like: > > /dev/sda /dev/sda1 /dev/sda2 /dev/sda3 > > Then re-run the same command WITH the usb plugged in which should give > you something like: > > /dev/sda /dev/sda1 /dev/sda2 /dev/sda3 /dev/sdb /dev/sdb1 > > This last letter to appear is the one you want and without the number. > So be REAL sure you have your usb device letter correct and: > > > dd if=./Fedora-Workstation-Live-x86_64-25_Alpha-2.iso of=/dev/sdb bs=1M > status=progress > > will work. > > If you want to easily understand the command line I suggest you go > through this quick course: > > http://linuxcommand.org/ > > It is a great primer for understanding all we are talking about and can > be done in about an evening. > > Caution: "dd" is an aggressive program so be sure of the variables you > writing to in the "of=" parts of the command. Also, the > "status=progress" part is optional, lets you see your progress of the > command. > > HTH > > Fred > > > _______________________________________________ > users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx > -- Kevin J. Cummings kjchome@xxxxxxxxxxx cummings@xxxxxxxxxxxxxxxxxx cummings@xxxxxxxxxxxxxxxxxxxxxxx Registered Linux User #1232 (http://www.linuxcounter.net/) _______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
