Re: anyone successfully integrated an hdtv for monitor?

[Jack Craig <jack.craig.aptos@xxxxxxxxx>]

Thx all, the pc label helped a lot.

also i think 1920x1080i is a bit more sharp an image.

next, how to persist it across reboot.

thx again to all, jackc...

On Mon, Aug 29, 2016 at 3:14 PM, Go Canes <letsgonhlcanes0@xxxxxxxxx> wrote:

For mine I have to use:

intel_panel_fitter -p A -x 1246 -y 686

IIRC, I had to install a package to get the intel_panel_fitter program - not sure if it useful if you don't have Intel graphics.

(I'll have to see if I can rename the HDMI port - my HDTV already has a PC port for the VGA connector....)

On Mon, Aug 29, 2016 at 1:43 PM, Jack Craig <jack.craig.aptos@xxxxxxxxx> wrote:

hi all,

i am trying to use a 32" LG 32cs560 for my F23.

i can get 1368x768 but i want to crank up 1920x1080, but its overscanning, truncating the left * right ends...

i get ...

xrandr --query
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected primary 2016x1134+0+0 (normal left inverted right x axis y axis) 1600mm x 900mm
   1920x1080     60.00*+  60.00    59.94    59.99    30.00    24.00    29.97    23.98 
   1920x1080i    60.00    59.94 
   1280x1024     60.02 
   1360x768      60.02 
   1152x864      59.97 
   1280x720      60.00    59.94 
   1024x768      60.00 
   800x600       60.32 
   720x480       60.00    59.94 
   640x480       60.00    59.94 
   720x400       70.08 
VGA-1 disconnected (normal left inverted right x axis y axis)

/0/100/1/0                           display        GF119 [GeForce GT 610]
/0/100/1/0.1                         multimedia     GF119 HDMI Audio Controller
/0/100/16                            communication  6 Series/C200 Series Chipset Fami

xdpyinfo | grep -B2 resolution
screen #0:
  dimensions:    1920x1080 pixels (508x286 millimeters)
  resolution:    96x96 dots per inch

cvt -v 1920 1080 60
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync

despite all this info, i am unable to switch to 1020x1080 with out the over scanning.

i am very suspicious about,...
HDMI-1 connected primary 2016x1134+0+0 (normal left inverted right x axis y axis) 1600mm x 900mm

should not  2016x1134+0+0 be 1920x1080?

suggestions? tia, jackc...

--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://lists.fedoraproject.org/admin/lists/users@xxxxxxxxxxraproject.org
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org

--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://lists.fedoraproject.org/admin/lists/users@lists.fedoraproject.org
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org

--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://lists.fedoraproject.org/admin/lists/users@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org