Hi Matthias, Thank you for your information. I probably did "Copying U-Boot to eMMC on the BBB" procedure for Ubuntu in the page what you shown. I will try this later. -- 桜井 <sakurai@xxxxxxxxxx> 2018-03-20 22:39 GMT+09:00 Matthias Runge <mrunge@xxxxxxxxxxxxxxxxx>: > On Mon, Mar 19, 2018 at 05:59:58AM +0000, Peter Robinson wrote: >> On Sun, Mar 18, 2018 at 12:37 AM, sakurai <sakurai@xxxxxxxxxx> wrote: >> > Hi Dennis and Peter, >> > >> > Of course I tried both pushing button and without it, but the result >> > was the same. >> > I remember the specification of the first version of the boot program >> > was designed as what you said. >> > I probably re-programmed the boot program according to the Ubuntu >> > without pushing the boot button >> > in order to boot from SD card. >> >> I'm not sure what we can do if you've reprogrammed it, one thing you >> can do is if you can boot off the OS that's on the emmc you can dd out >> the first few MB of the emmc to remove that version of u-boot at which >> it would use the one on the mSD without the need of the boot button. >> I've had numerous reports of F-27 GA working just fine on the BBB. >> > > /me nods. I'm running F27 on a Beaglebone Black. I did not do anything > specific, other than following the guides (for f21/22/23, don't remember?). > I probably followed this guide[1]. > Afterwards, it just works without an issue. > > [1] https://fedoraproject.org/wiki/Architectures/ARM/F21/Installation#For_the_BeagleBone_.28_Black_.26_White_.29 > > > Matthias > -- > Matthias Runge <mrunge@xxxxxxxxxxxxxxxxx> > _______________________________________________ > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
