Hi Dennis and Peter, Of course I tried both pushing button and without it, but the result was the same. I remember the specification of the first version of the boot program was designed as what you said. I probably re-programmed the boot program according to the Ubuntu without pushing the boot button in order to boot from SD card. -- 桜井 <sakurai@xxxxxxxxxx> 2018-03-14 1:58 GMT+09:00 Peter Robinson <pbrobinson@xxxxxxxxx>: > On Tue, Mar 13, 2018 at 1:51 PM, sakurai <sakurai@xxxxxxxxxx> wrote: >> 2018-03-13 8:18 GMT+09:00 Peter Robinson <pbrobinson@xxxxxxxxx>: >>> On Mon, Mar 12, 2018 at 10:47 PM, sakurai <sakurai@xxxxxxxxxx> wrote: >>>> Hi Peter, >>>> >>>> Thank you for your prompt comment. >>>> I removed uEnv.txt but following message was displayed. >> (snip) >>> >>> I don't know what you've done to now, you're likely possibly better >>> off starting again with arm-image-installer to setup the image again >>> with am335x_evm and then try booting with the boot button held down. >> >> I tried again using arm-image-installer by following command. >> >>> fedora-arm-image-installer --image=Fedora-Server-armhfp-27-1.6-sda.raw.xz --target=am335x_evm --media=/dev/sdd --norootpass --resizefs --addconsole --selinux=off >> >> Not am335x_boneblack? Anyway I installed using arm335x_evm this time. >> >> My boot loader may be new because Angstrom will not boot without >> holding the boot button. >> >>> You might also want to give the full output. >> >> Here is the full output. >> >> U-Boot SPL 2013.04-dirty (Jun 19 2013 - 09:57:14) >> musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) >> musb-hdrc: MHDRC RTL version 2.0 >> musb-hdrc: setup fifo_mode 4 >> musb-hdrc: 28/31 max ep, 16384/16384 memory >> USB Peripheral mode controller at 47401000 using PIO, IRQ 0 >> musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) >> musb-hdrc: MHDRC RTL version 2.0 >> musb-hdrc: setup fifo_mode 4 >> musb-hdrc: 28/31 max ep, 16384/16384 memory >> USB Host mode controller at 47401800 using PIO, IRQ 0 >> OMAP SD/MMC: 0 >> mmc_send_cmd : timeout: No status update >> reading u-boot.img >> reading u-boot.img >> >> >> U-Boot 2013.04-dirty (Jun 19 2013 - 09:57:14) > > As Dennis had already stated this isn't Fedora's u-boot, what you see > is as I would expect, basically the problem here is dealing with the > boot button correctly. _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
