Hi, not want to be annoying, but I need a solution. if not here, anyone know where I can ask? Thanks! 2014-03-19 21:22 GMT-03:00 Leo Combes <combesl@xxxxxxxxx>: > Hi Clemens, thanks for quick response. > > I do not see any error in the logs. > These are the logs when connecting: > > dmesg > [ 201.321494] usb 1-1.1: new full-speed USB device number 6 using ehci-pci > [ 201.432986] usb 1-1.1: New USB device found, idVendor=2573, idProduct=0008 > [ 201.432992] usb 1-1.1: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 201.432996] usb 1-1.1: Product: MAYA44 USB+ > [ 201.432999] usb 1-1.1: Manufacturer: ESI Audiotechnik GmbH > [ 201.440242] hid-generic 0003:2573:0008.0002: hiddev0,hidraw1: USB > HID v1.00 Device [ESI Audiotechnik GmbH MAYA44 USB+] on > usb-0000:00:1a.0-1.1/input3 > [ 201.777275] usbcore: registered new interface driver snd-usb-audio > > > syslog > Mar 19 20:58:45 leo-ThinkPad kernel: [ 201.321494] usb 1-1.1: new > full-speed USB device number 6 using ehci-pci > Mar 19 20:58:46 leo-ThinkPad kernel: [ 201.432986] usb 1-1.1: New USB > device found, idVendor=2573, idProduct=0008 > Mar 19 20:58:46 leo-ThinkPad kernel: [ 201.432992] usb 1-1.1: New USB > device strings: Mfr=1, Product=2, SerialNumber=0 > Mar 19 20:58:46 leo-ThinkPad kernel: [ 201.432996] usb 1-1.1: > Product: MAYA44 USB+ > Mar 19 20:58:46 leo-ThinkPad kernel: [ 201.432999] usb 1-1.1: > Manufacturer: ESI Audiotechnik GmbH > Mar 19 20:58:46 leo-ThinkPad kernel: [ 201.440242] hid-generic > 0003:2573:0008.0002: hiddev0,hidraw1: USB HID v1.00 Device [ESI > Audiotechnik GmbH MAYA44 USB+] on usb-0000:00:1a.0-1.1/input3 > Mar 19 20:58:46 leo-ThinkPad mtp-probe: checking bus 1, device 6: > "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1" > Mar 19 20:58:46 leo-ThinkPad mtp-probe: bus: 1, device: 6 was not an MTP device > Mar 19 20:58:46 leo-ThinkPad kernel: [ 201.777275] usbcore: > registered new interface driver snd-usb-audio > > I tested connecting to another pc, logs are similar (no errors) and > alsamixer in the section "capture" also shows: > "This sound device does not have any capture controls" > > > Regards, > Leo > > 2014-03-19 4:59 GMT-03:00 Clemens Ladisch <cladisch@xxxxxxxxxxxxxx>: >> Leo Combes wrote: >>> I have bought a Maya 44 USB, with 4 output and 4 input channels. >>> >>> The soundcard works fine in playback, but in recording has some >>> problems, specificly there is no way to control the volume of the >>> recording on inputs. >>> >>> The most interesting thread that I found, is one on this mailist, >>> sadly after some messages, user didn't catch up with the conversation: >>> >>> http://mailman.alsa-project.org/pipermail/alsa-devel/2011-November/046242.html >> >> Are there any error messages in the system log when the driver is >> loaded? >> >> >> Regards, >> Clemens ------------------------------------------------------------------------------ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
