Hi,
not want to be annoying, but I need a solution.
if not here, anyone know where I can ask?
Thanks!
El mar 26, 2014 5:16 p.m., "Leo Combes" <combesl@xxxxxxxxx> escribió:
Hi,
Is there any way to solve this problem?
Thanks in advance!
2014-03-19 21:22 GMT-03:00 Leo Combes <combesl@xxxxxxxxx>:
> Hi Clemens, thanks for quick response.
>
> I do not see any error in the logs.
> These are the logs when connecting:
>
> dmesg
> [ 201.321494] usb 1-1.1: new full-speed USB device number 6 using ehci-pci
> [ 201.432986] usb 1-1.1: New USB device found, idVendor=2573, idProduct=0008
> [ 201.432992] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 201.432996] usb 1-1.1: Product: MAYA44 USB+
> [ 201.432999] usb 1-1.1: Manufacturer: ESI Audiotechnik GmbH
> [ 201.440242] hid-generic 0003:2573:0008.0002: hiddev0,hidraw1: USB
> HID v1.00 Device [ESI Audiotechnik GmbH MAYA44 USB+] on
> usb-0000:00:1a.0-1.1/input3
> [ 201.777275] usbcore: registered new interface driver snd-usb-audio
>
>
> syslog
> Mar 19 20:58:45 leo-ThinkPad kernel: [ 201.321494] usb 1-1.1: new
> full-speed USB device number 6 using ehci-pci
> Mar 19 20:58:46 leo-ThinkPad kernel: [ 201.432986] usb 1-1.1: New USB
> device found, idVendor=2573, idProduct=0008
> Mar 19 20:58:46 leo-ThinkPad kernel: [ 201.432992] usb 1-1.1: New USB
> device strings: Mfr=1, Product=2, SerialNumber=0
> Mar 19 20:58:46 leo-ThinkPad kernel: [ 201.432996] usb 1-1.1:
> Product: MAYA44 USB+
> Mar 19 20:58:46 leo-ThinkPad kernel: [ 201.432999] usb 1-1.1:
> Manufacturer: ESI Audiotechnik GmbH
> Mar 19 20:58:46 leo-ThinkPad kernel: [ 201.440242] hid-generic
> 0003:2573:0008.0002: hiddev0,hidraw1: USB HID v1.00 Device [ESI
> Audiotechnik GmbH MAYA44 USB+] on usb-0000:00:1a.0-1.1/input3
> Mar 19 20:58:46 leo-ThinkPad mtp-probe: checking bus 1, device 6:
> "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1"
> Mar 19 20:58:46 leo-ThinkPad mtp-probe: bus: 1, device: 6 was not an MTP device
> Mar 19 20:58:46 leo-ThinkPad kernel: [ 201.777275] usbcore:
> registered new interface driver snd-usb-audio
>
> I tested connecting to another pc, logs are similar (no errors) and
> alsamixer in the section "capture" also shows:
> "This sound device does not have any capture controls"
>
>
> Regards,
> Leo
>
> 2014-03-19 4:59 GMT-03:00 Clemens Ladisch <cladisch@xxxxxxxxxxxxxx>:
>> Leo Combes wrote:
>>> I have bought a Maya 44 USB, with 4 output and 4 input channels.
>>>
>>> The soundcard works fine in playback, but in recording has some
>>> problems, specificly there is no way to control the volume of the
>>> recording on inputs.
>>>
>>> The most interesting thread that I found, is one on this mailist,
>>> sadly after some messages, user didn't catch up with the conversation:
>>>
>>> http://mailman.alsa-project.org/pipermail/alsa-devel/2011-November/046242.html
>>
>> Are there any error messages in the system log when the driver is
>> loaded?
>>
>>
>> Regards,
>> Clemens
------------------------------------------------------------------------------
_______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
