On Sun, Dec 28, 2008 at 8:57 PM, Rob Rosenfeld <rob+alsa@xxxxxxxxxxxx> wrote: > Rob Rosenfeld <rob+alsa <at> rosenfeld.to> writes: >> >> I have an ASUS M3N78-VM motherboard with onboard nVidia audio, >> including HDMI audio output. My goal is to send all audio output over >> the HDMI connector, eventually passing ac3 to a stereo. I'm trying >> out a recent version of sound-2.6.git for the support of the nVidia >> HDMI codec and have compiled alsa-utils 1.0.18. >> >> I believe I've correctly compiled the kernel with the correct driver >> and codecs (VIA and NVIDIA selected). The output from `aplay -l` >> shows the two devices I expected to see >> >> But `aplay -L` doesn't show any iec958/spdif/hdmi device name, which >> from my online searches, I was expecting to see. > > I understand if nobody can help with this particular issue, but want to be sure > . . . is this the right place for this question? If not, could you recommend > where else I might try? > The device is working. From your alsa-info.sh output: !!Aplay/Arecord output !!------------ [ ... ] card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 You should be able to use hw:0,3 to output to the HDMI. aplay -L does not list it because the device is just not defined in your alsa-lib. Probably alsa-lib 1.0.18a would list it. Lee > Updated alsa-info.sh output at: http://www.alsa-project.org/db/? > f=650ac12cbf87be93ecad8e88bb2be14275ed1bfd > > > > > > > > > ------------------------------------------------------------------------------ > _______________________________________________ > Alsa-user mailing list > Alsa-user@xxxxxxxxxxxxxxxxxxxxx > https://lists.sourceforge.net/lists/listinfo/alsa-user > ------------------------------------------------------------------------------ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
