On Friday 19 December 2008, Nigel Henry wrote:> On Thursday 18 December 2008 22:48, Raul Massano Brás wrote:> > On Thursday 18 December 2008, Nigel Henry wrote:> > > On Thursday 18 December 2008 19:42, Raul Massano Brás wrote:> > > > Hello> > > >> > > > My system has a ASUS P5Q SE2 motherboard and I can't get any> > > > sound from the line in input.> > > >> > > > I'm using Fedora 10, alsa drivers 1.0.18a, alsa-lib 1.0.18 and> > > > alsa-utils 1.0.18> > > >> > > >> > > > the output of alsa-info has been uploaded to:> > > > http://www.alsa-project.org/db/?f=0aea89e6a07f160198140c1d9e29637d612> > > >22 29 4> > > >> > > > Best Regards,> > > >> > > > Raul Brás> > >> > > Hi Raul.> > >> > > When you type alsamixer in Gnomes terminal, or KDE's Konsole, you only> > > see one control, which is the one for pulseaudio. Open alsamixer as> > > below, and you will see all controls for your soundcard.> > >> > > alsamixer -D hw:0> > >> > > You should see many sliders. Some may be muted. Use the "M" key to> > > toggle mute/unmute, and sliders like "line" may need to be pushed up.> >> > I have done that already. The "Line" slide is unmuted and at maximum,> > but I can't get any sound from line in.>> Hi Raul.> Hi Nigel > Will you run the alsa-info.sh script again, and repost the new link. All I> get is a blank page when trying to access the present link (it may have> timed out, and been removed). The new output is athttp://www.alsa-project.org/db/?f=e78c828e0db9df27603c70965df32d8629feae6f >> Another thing, is that you may have to have more than one control slider up> for the line in to produce sound. I know on my Archlinux install, where the> soundcard on that machine is an Audigy2 soundblaster, I have to press F4> when alsamixer is open, and adjust some of the capture sliders to get> sounds for line in. I'm not sure which at the moment, as it's not booted> up, and as your soundcard may be different, you probably won't have the> same controls as I have. It's worth having a look at your capture controls> though. The capture controls in alsamixer are:Front Mic BoostMic BoostCaptureCapture 1Input Source. This one is a switch that alternates between:Line, CD, Front Mic,Mic and Stereo Mixer I have tried every combination without success. On the F3 pane I have:Master FrontHeadphonePCMFrontFront MicSurroundCenterLFESide LineCDMicIndependent HP. This one is a ON/Off switch All the channels are unmuted and all thw way up. >> Well I've just booted up Archlinux on the machine with the Audigy2> soundblaster card. With other distro's on this machine, I only have to have> the line slider up to get sound output from the line in. Archlinux has> alsamixer version 1.0.16, and has no slider for line on the playback view> "F3". It does have an analog mix control though which needs to be up.> Switching to "F4" for the capture options, I need to move to the line> slider, press space bar to enable it, and push the line slider up. Then I> get sounds from my TV card, which has a link cable from audio out on the TV> card to line in on the soundcard. I use the line in to connect a TV card too. It used to work with my previousmotherboard. The output from the tv card has sound, I can hear it if I connectthe speakers directly to it. Best Regards, Raul >> What I've written above is only an example as to what I have to do to get> sounds working from the line in on one distro (Archlinux)>> All the best.>> Nigel.>>>>>> --------------------------------------------------------------------------->--- SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas,> Nevada. The future of the web can't happen without you. Join us at MIX09> to help pave the way to the Next Web now. Learn more and register at> http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com>/ _______________________________________________> Alsa-user mailing list> Alsa-user@xxxxxxxxxxxxxxxxxxxxx> https://lists.sourceforge.net/lists/listinfo/alsa-user ------------------------------------------------------------------------------_______________________________________________Alsa-user mailing listAlsa-user@xxxxxxxxxxxxxxxxxxxxxxxxxx://lists.sourceforge.net/lists/listinfo/alsa-user
