oops, kernel reported kernel bug, and the attempt to run 'system>preference>hardware>sound' hang the system. dmesg is attached.
On Wed, Jul 30, 2008 at 2:56 AM, Rene Herman <rene.herman@xxxxxxxxxxxx> wrote:
An earlier found report said the thing stopped working in 2.6.11 which made me have hopes for that one....
Here's the next attempt. Again applies to a virgin (2.6.26) ens1370.c. If it's easier, the entire file as it should now look after this patch is at:
http://members.home.nl/rene.herman/ens1371/ens1370-src-delay.c
Rename it to plain "ens1370.c" and just copy it over the ens1370.c you are compiling.
If this does not work, I noticed another difference in the OSS driver but that one looks like a plain bug in it so let's try this one first.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.25-14.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu May 1 06:28:41 EDT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131056
HighMem 131056 -> 131056
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 131056
On node 0 totalpages: 131056
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 991 pages used for memmap
Normal zone: 125969 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.2 present.
Using APIC driver default
ACPI: RSDP 000F76B0, 0014 (r0 GBT )
ACPI: RSDT 1FFF3000, 0028 (r1 GBT AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 1FFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 1FFF30C0, 3538 (r1 GBT AWRDACPI 1000 MSFT 100000C)
ACPI: FACS 1FFF0000, 0040
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 30000000 (gap: 20000000:dfb00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130033
Kernel command line: ro root=UUID=d8531264-f146-4e5e-b62d-53fad082b95a rhgb quiet
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (0140d000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07b9000 soft=c0799000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 896.856 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 511880k/524224k available (2236k kernel code, 11716k reserved, 1121k data, 284k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffc53000 - 0xfffff000 (3760 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xe0800000 - 0xff3fe000 ( 491 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc074f000 - 0xc0796000 ( 284 kB)
.data : 0xc062f37d - 0xc0747800 (1121 kB)
.text : 0xc0400000 - 0xc062f37d (2236 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 1794.91 BogoMIPS (lpj=897455)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0e20)
CPU0: Intel Celeron (Coppermine) stepping 0a
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=3728 bytes
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
Time: 14:08:42 Date: 07/30/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb2f0, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 4080-40bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:00: iomem range 0xd0000-0xd3fff has been reserved
system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
system 00:00: iomem range 0xfc000-0xfffff could not be reserved
system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
system 00:00: iomem range 0xffb00000-0xffb7ffff could not be reserved
system 00:00: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:00: iomem range 0xe0000-0xeffff has been reserved
system 00:02: ioport range 0x3f0-0x3f1 has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x290-0x29f has been reserved
system 00:02: ioport range 0x800-0x805 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 0xd4000000-0xd5ffffff
PREFETCH window: 0x00000000d6000000-0x00000000d7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 9000-afff
MEM window: 0xd8000000-0xd9ffffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 2635k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1217426922.871:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: PNP0C0B:00 is registered as cooling_device0
ACPI: Fan [FAN] (on)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:00 is registered as cooling_device1
ACPI: Processor [CPU0] (supports 2 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (27 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 0:809:132
hash matches device device:07
Freeing unused kernel memory: 284k freed
Write protecting the kernel read-only data: 908k
Marking TSC unstable due to: TSC halts in idle.
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:03.2[C] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:02:03.2: EHCI Host Controller
ehci_hcd 0000:02:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:02:03.2: irq 11, io mem 0xd9000000
ehci_hcd 0000:02:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25-14.fc9.i686 ehci_hcd
usb usb1: SerialNumber: 0000:02:03.2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.2: irq 10, io base 0x0000b000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25-14.fc9.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1f.2
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1f.4: irq 11, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25-14.fc9.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1f.4
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:02:03.0: UHCI Host Controller
uhci_hcd 0000:02:03.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:02:03.0: irq 10, io base 0x00009800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25-14.fc9.i686 uhci_hcd
usb usb4: SerialNumber: 0000:02:03.0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:03.1[B] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:02:03.1: UHCI Host Controller
uhci_hcd 0000:02:03.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:02:03.1: irq 11, io base 0x00009c00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.25-14.fc9.i686 uhci_hcd
usb usb5: SerialNumber: 0000:02:03.1
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
usb 2-2: New USB device found, idVendor=058f, idProduct=9254
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Generic USB Hub
usb 2-2: Manufacturer: ALCOR
libata version 3.00 loaded.
PCI: Setting latency timer of device 0000:00:1f.1 to 64
usb 2-2.1: new low speed USB device using uhci_hcd and address 3
usb 2-2.1: configuration #1 chosen from 1 choice
input: USB Mouse as /devices/pci0000:00/0000:00:1f.2/usb2/2-2/2-2.1/2-2.1:1.0/input/input2
input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1f.2-2.1
usb 2-2.1: New USB device found, idVendor=15d9, idProduct=0a33
usb 2-2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-2.1: Product: USB Mouse
ata_piix 0000:00:1f.1: version 2.12
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata1.00: ATA-6: ST380011A, 8.01, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2.00: ATAPI: APACHI 12X DVD-ROM DRIVE, 422E, max UDMA/66
ata2.01: ATAPI: HL-DT-ST GCE-8481B, 1.02, max UDMA/33
ata2.00: limited to UDMA/33 due to 40-wire cable
ata2.00: configured for UDMA/33
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA ST380011A 8.01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM APACHI 12X DVD-ROM 422E PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8481B 1.02 PQ: 0 ANSI: 5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1217426931.502:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux:8192 avtab hash slots allocated. Num of rules:172315
SELinux:8192 avtab hash slots allocated. Num of rules:172315
security: 8 users, 12 roles, 2301 types, 116 bools, 1 sens, 1024 cats
security: 72 classes, 172315 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=allow
type=1403 audit(1217426935.460:3): policy loaded auid=4294967295 ses=4294967295
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 2x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sr 1:0:1:0: Attached scsi generic sg2 type 5
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button (CM) [SLPB]
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
firewire_ohci: Added fw-ohci device 0000:02:01.0, OHCI version 1.0
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:02:04.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:02:04.0: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xe08e2000, 00:e0:4c:39:3d:88, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
firewire_core: created device fw0: GUID 00308d0120e3a0c7, S400
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
FDC 0 is a post-1991 82077
input: PC Speaker as /devices/platform/pcspkr/input/input6
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK0] -> GSI 5 (level, low) -> IRQ 5
ppdev: user-space parallel port driver
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2048276k swap on /dev/sda2. Priority:-1 extents:1 across:2048276k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran@xxxxxxxxxxxxxxxxxxxx>
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
BUG: unable to handle kernel NULL pointer dereference at 00000028
IP: [<e09e7627>] :snd_ens1371:snd_ensoniq_playback1_open+0x24/0x7f
*pde = 1ef71067 *pte = 00000000
Oops: 0002 [#1] SMP
Modules linked in: bridge bnep rfcomm l2cap bluetooth fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables nf_conntrack_ftp ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables loop dm_mirror dm_multipath dm_mod ipv6 ppdev snd_ens1371 gameport snd_rawmidi snd_ac97_codec ac97_bus snd_seq_dummy parport_pc parport pcspkr snd_seq_oss floppy snd_seq_midi_event snd_seq i2c_i801 snd_seq_device i2c_core snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd 8139too soundcore 8139cp snd_page_alloc mii firewire_ohci firewire_core crc_itu_t button iTCO_wdt iTCO_vendor_support sg sr_mod cdrom ata_piix pata_acpi ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 2254, comm: pulseaudio Not tainted (2.6.25-14.fc9.i686 #1)
EIP: 0060:[<e09e7627>] EFLAGS: 00210286 CPU: 0
EIP is at snd_ensoniq_playback1_open+0x24/0x7f [snd_ens1371]
EAX: dec1bc00 EBX: 00000000 ECX: 0000000e EDX: dee12c00
ESI: e09e804c EDI: dee12cac EBP: def75e50 ESP: def75e40
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process pulseaudio (pid: 2254, ti=def75000 task=defb6000 task.ti=def75000)
Stack: dee12c00 00000000 def75e90 dfaa2f10 def75e64 e09f0d8c dec1bc00 fffffff2
dfaa2e00 def75ea0 e09f0e66 def75e90 00000000 defb4000 dfaa2f20 00000000
defb6000 c0420385 dfaa2f24 dfaa2f24 e0a321b3 defb4000 e0a36ec0 defb4000
Call Trace:
[<e09f0d8c>] ? snd_pcm_open_substream+0x3a/0x72 [snd_pcm]
[<e09f0e66>] ? snd_pcm_open+0xa2/0x179 [snd_pcm]
[<c0420385>] ? default_wake_function+0x0/0xd
[<e0a321b3>] ? snd_lookup_minor_data+0x3d/0x44 [snd]
[<e09f0f89>] ? snd_pcm_playback_open+0x23/0x26 [snd_pcm]
[<e0a324e5>] ? snd_open+0xb9/0x110 [snd]
[<c048502c>] ? chrdev_open+0x110/0x12c
[<c04815b6>] ? __dentry_open+0xcf/0x185
[<c04816f3>] ? nameidata_to_filp+0x1f/0x33
[<c0484f1c>] ? chrdev_open+0x0/0x12c
[<c0481735>] ? do_filp_open+0x2e/0x35
[<c04f5b87>] ? strncpy_from_user+0x3b/0x55
[<c048177c>] ? do_sys_open+0x40/0xb5
[<c0481833>] ? sys_open+0x1e/0x26
[<c0405bf2>] ? syscall_call+0x7/0xb
[<c0620000>] ? acpi_pci_root_add+0x22f/0x2a0
=======================
Code: e8 ff e9 00 00 5d c3 55 b9 0e 00 00 00 89 e5 57 56 be 4c 80 9e e0 53 83 ec 04 8b 50 70 8b 58 08 89 d7 89 55 f0 81 c7 ac 00 00 00 <83> 4b 28 01 89 43 58 f3 a5 e8 01 c1 00 00 89 d8 e8 d6 42 c4 df
EIP: [<e09e7627>] snd_ensoniq_playback1_open+0x24/0x7f [snd_ens1371] SS:ESP 0068:def75e40
---[ end trace 4cb322b0736c729d ]---
list_add corruption. next->prev should be prev (dfaa2f24), but was 00000000. (next=def75e88).
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:27!
invalid opcode: 0000 [#2] SMP
Modules linked in: bridge bnep rfcomm l2cap bluetooth fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables nf_conntrack_ftp ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables loop dm_mirror dm_multipath dm_mod ipv6 ppdev snd_ens1371 gameport snd_rawmidi snd_ac97_codec ac97_bus snd_seq_dummy parport_pc parport pcspkr snd_seq_oss floppy snd_seq_midi_event snd_seq i2c_i801 snd_seq_device i2c_core snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd 8139too soundcore 8139cp snd_page_alloc mii firewire_ohci firewire_core crc_itu_t button iTCO_wdt iTCO_vendor_support sg sr_mod cdrom ata_piix pata_acpi ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 2362, comm: pulseaudio Tainted: G D (2.6.25-14.fc9.i686 #1)
EIP: 0060:[<c04f83c9>] EFLAGS: 00210046 CPU: 0
EIP is at __list_add+0x1a/0x4a
EAX: 00000061 EBX: def8ee88 ECX: 00200046 EDX: 00200046
ESI: dfaa2f20 EDI: 00200246 EBP: def8ee4c ESP: def8ee38
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process pulseaudio (pid: 2362, ti=def8e000 task=deea0e90 task.ti=def8e000)
Stack: c06d7ce6 dfaa2f24 00000000 def75e88 def8ee7c def8ee54 c04f8403 def8ee68
c0438997 fffffff2 dfaa2e00 dfaa2f10 def8eea0 e09f0e4e 00000000 defce960
dfaa2f20 00000000 deea0e90 c0420385 00000000 def8eea0 e0a321b3 defce960
Call Trace:
[<c04f8403>] ? list_add+0xa/0xf
[<c0438997>] ? add_wait_queue+0x1f/0x2d
[<e09f0e4e>] ? snd_pcm_open+0x8a/0x179 [snd_pcm]
[<c0420385>] ? default_wake_function+0x0/0xd
[<e0a321b3>] ? snd_lookup_minor_data+0x3d/0x44 [snd]
[<e09f0f89>] ? snd_pcm_playback_open+0x23/0x26 [snd_pcm]
[<e0a324e5>] ? snd_open+0xb9/0x110 [snd]
[<c048502c>] ? chrdev_open+0x110/0x12c
[<c04815b6>] ? __dentry_open+0xcf/0x185
[<c04816f3>] ? nameidata_to_filp+0x1f/0x33
[<c0484f1c>] ? chrdev_open+0x0/0x12c
[<c0481735>] ? do_filp_open+0x2e/0x35
[<c04f5b87>] ? strncpy_from_user+0x3b/0x55
[<c048177c>] ? do_sys_open+0x40/0xb5
[<c0481833>] ? sys_open+0x1e/0x26
[<c0405bf2>] ? syscall_call+0x7/0xb
[<c0620000>] ? acpi_pci_root_add+0x22f/0x2a0
=======================
Code: 42 04 00 02 20 00 c7 02 00 01 10 00 8b 5d fc c9 c3 55 89 e5 53 89 c3 8b 41 04 39 d0 74 14 51 50 52 68 e6 7c 6d c0 e8 fd 70 13 00 <0f> 0b 83 c4 10 eb fe 8b 10 39 ca 74 14 50 52 51 68 36 7d 6d c0
EIP: [<c04f83c9>] __list_add+0x1a/0x4a SS:ESP 0068:def8ee38
---[ end trace 4cb322b0736c729d ]---
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
