On 3/1/12 6:15 PM, Dave Chinner wrote:
> On Thu, Mar 01, 2012 at 05:27:13PM -0600, Eric Sandeen wrote:
>> This test uses the scsi_debug module to test mkfs against
>> various physical & logical sector sizes, and with aligned
>> and unaligned devices.
>>
>> Check out the scenarios in the test, I think I have the right
>> outcomes specified...
>>
>> Hope it's not looking too hacky.
>>
>> Signed-off-by: Eric Sandeen <sandeen@xxxxxxxxxx>
>> ---
>>
>> diff --git a/279 b/279
>> new file mode 100755
>> index 0000000..b7ad622
>> --- /dev/null
>> +++ b/279
>> @@ -0,0 +1,115 @@
>> +#! /bin/bash
>> +# FS QA Test No. 279
>> +#
>> +# Test mkfs.xfs against various types of devices with varying
>> +# logical & physical sector sizes and offsets.
> ....
>> +seq=`basename $0`
>> +echo "QA output created by $seq"
>> +
>> +here=`pwd`
>> +tmp=/tmp/$$
>> +status=0 # failure is the default!
>
> status=1 means failure is the default....
stupid cut & paste....
>> +trap "_cleanup; exit \$status" 0 1 2 3 15
>> +
>> +_cleanup()
>> +{
>> + cd /
>> + rm -f $tmp.*
>> +}
>> +
>> +# get standard environment, filters and checks
>> +. ./common.rc
>> +. ./common.filter
>> +. ./common.scsi_debug
>> +
>> +# real QA test starts here
>> +_supported_fs xfs
>> +_supported_os Linux
>> +
>> +_require_scsi_debug
>> +
>> +rm -f $seq.full
>> +
>> +_get_sector_size()
>> +{
>> + xfs_db -c "sb 0" -c "p sectsize" $SCSI_DEBUG_DEV | awk '{print $3}'
>> +}
>
> Hmmm. seems unnecessary - can be got from mkfs output.
Thanks, forgot about that trick.
>> +
>> +_wipe_device()
>> +{
>> + device=$1
>> + dd if=/dev/zero of=$device bs=4k count=1 &> /dev/null
>> +}
>> +
>> +_check_mkfs()
>> +{
>> + echo "===================" | tee -a $seq.full
>> + echo "mkfs with opts: $@" | sed -e "s/\/dev\/sd./DEVICE/" | tee -a $seq.full
>
> you could use sed's alternative delimiter to avoid needing to escape
> the path name. i.e | sed -e "s,/dev/sd.,DEVICE,"
good idea.
>> + mkfs.xfs $@ >> $seq.full 2>&1
>
> mkfs.xfs $@ | tee -a $seq.full | filter_mkfs 2> $tmp.mkfs
>
>> + if [ $? -ne 0 ]; then
>> + echo "Failed." | tee -a $seq.full
>> + return
>> + fi
>> + echo "Passed." | tee -a $seq.full
>
>
>> + echo -n "Got sector size: " | tee -a $seq.full
>
> . $tmp.mkfs
> echo -n "Got sector size: $sectsz " | tee -a $seq.full
>
>> + _get_sector_size | tee -a $seq.full
>> + device=`echo $@ | awk '{print $NF}'`
>> + _wipe_device $device
>
> Not sure what this is supposed to do. The awk statement prints the
> number of fields in the input record, and _wipe_device uses that as
> a file name? What am I missing?
that '{print $NF}' prints the last field...
>> +}
>
> pretty much the entire output of this function is teed to $seq.full.
> You could do that at the call site. i.e.
>
> _check_mkfs .... | tee -a $seq.full
>
> Even better:
>
>> +
>> +# === 4k physical 512b logical aligned
>> +echo "===================" | tee -a $seq.full
>> +echo "4k physical 512b logical aligned" | tee -a $seq.full
>> +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 128`
>> +# sector size should default to 4k
>> +_check_mkfs "" $SCSI_DEBUG_DEV
>> +# blocksize smaller than physical sectorsize should revert to logical sectorsize
>
> (missing a test case here?)
yep
>> +_put_scsi_debug_dev
>
> (
> echo "==================="
> echo "4k physical 512b logical aligned"
> SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 128`
> # sector size should default to 4k
> _check_mkfs "" $SCSI_DEBUG_DEV
> # blocksize smaller than physical sectorsize should revert to logical sectorsize
> _put_scsi_debug_dev
> ) | tee -a $seq.full
ok... will see if I can get the right stuff to the right place ...
> .....
>> +
>> +exit
>
> status=0
> exit
>
>> +# Functions useful for tests on unique block devices
>> +#
>> +
>> +_require_scsi_debug()
>> +{
>> + # make sure we have the module and it's not already used
>> + modinfo scsi_debug 2>&1 > /dev/null || _notrun "scsi_debug module not found"
>> + lsmod | grep -wq scsi_debug && _notrun "scsi_debug module in use"
>> + # make sure it has the features we need
>> + # logical/physical sectors plus unmap support all went in together
>> + modinfo scsi_debug | grep -wq sector_size || _notrun "scsi_debug too old"
>> +}
>
> Might work for modules, but what about CONFIG_SCSI_DEBUG=y? I
> thought you could do all this configuration stuff through the
> /sys/bus/scsi/drivers/scsi_debug interface so you didn't need to
> screw with modules and parameters?
sigh, have to handle them both I suppose.
/sys/bus/pseudo/drivers/scsi_debug actually...
# ls /sys/bus/pseudo/drivers/scsi_debug/
adapter0 bind dif every_nth map no_lun_0 num_tgts scsi_level unbind
add_host delay dix fake_rw max_luns no_uld opts sector_size virtual_gb
ato dev_size_mb dsense guard max_queue num_parts ptype uevent vpd_use_hostno
not sure offhand how to do things like set alignment there.
>> +
>> +# Args: [physical sector size, [logical sector size, [unaligned(0|1), [size in megs]]]]
>> +_get_scsi_debug_dev()
>> +{
>> + # Defaults to phys 512, logical 512, aligned
>> + physical=${1-512}
>> + logical=${2-512}
>> + unaligned=${3-0}
>> + size=${4-128}
>> +
>> + phys_exp=0
>> + while [ $logical -lt $physical ]; do
>> + let physical=physical/2
>> + let phys_exp=phys_exp+1
>> + done
>> + opts="sector_size=$logical physblk_exp=$phys_exp lowest_aligned=$unaligned dev_size_mb=$size"
>> + echo "scsi_debug options $opts" >> $seq.full
>> + modprobe scsi_debug $opts
>> + [ $? -eq 0 ] || _fail "scsi_debug modprobe failed"
>> + sleep 1
>> + device=`grep -wl scsi_debug /sys/block/sd*/device/model | awk -F / '{print $4}'`
>> + echo "/dev/$device"
>> +}
>> +
>> +_put_scsi_debug_dev()
>> +{
>> + sleep 1
>> + rmmod scsi_debug || _fail "Could not remove scsi_debug module"
>> +}
>
> What is the sleep for?
Module stays busy w/o it and the rmmod fails, not sure why offhand.... which probably makes it not very robust :)
-Eric
> Cheers,
>
> Dave.
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
