On Thu, Mar 01, 2012 at 05:27:13PM -0600, Eric Sandeen wrote:
> This test uses the scsi_debug module to test mkfs against
> various physical & logical sector sizes, and with aligned
> and unaligned devices.
>
> Check out the scenarios in the test, I think I have the right
> outcomes specified...
>
> Hope it's not looking too hacky.
>
> Signed-off-by: Eric Sandeen <sandeen@xxxxxxxxxx>
> ---
>
> diff --git a/279 b/279
> new file mode 100755
> index 0000000..b7ad622
> --- /dev/null
> +++ b/279
> @@ -0,0 +1,115 @@
> +#! /bin/bash
> +# FS QA Test No. 279
> +#
> +# Test mkfs.xfs against various types of devices with varying
> +# logical & physical sector sizes and offsets.
....
> +seq=`basename $0`
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=0 # failure is the default!
status=1 means failure is the default....
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common.rc
> +. ./common.filter
> +. ./common.scsi_debug
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_supported_os Linux
> +
> +_require_scsi_debug
> +
> +rm -f $seq.full
> +
> +_get_sector_size()
> +{
> + xfs_db -c "sb 0" -c "p sectsize" $SCSI_DEBUG_DEV | awk '{print $3}'
> +}
Hmmm. seems unnecessary - can be got from mkfs output.
> +
> +_wipe_device()
> +{
> + device=$1
> + dd if=/dev/zero of=$device bs=4k count=1 &> /dev/null
> +}
> +
> +_check_mkfs()
> +{
> + echo "===================" | tee -a $seq.full
> + echo "mkfs with opts: $@" | sed -e "s/\/dev\/sd./DEVICE/" | tee -a $seq.full
you could use sed's alternative delimiter to avoid needing to escape
the path name. i.e | sed -e "s,/dev/sd.,DEVICE,"
> + mkfs.xfs $@ >> $seq.full 2>&1
mkfs.xfs $@ | tee -a $seq.full | filter_mkfs 2> $tmp.mkfs
> + if [ $? -ne 0 ]; then
> + echo "Failed." | tee -a $seq.full
> + return
> + fi
> + echo "Passed." | tee -a $seq.full
> + echo -n "Got sector size: " | tee -a $seq.full
. $tmp.mkfs
echo -n "Got sector size: $sectsz " | tee -a $seq.full
> + _get_sector_size | tee -a $seq.full
> + device=`echo $@ | awk '{print $NF}'`
> + _wipe_device $device
Not sure what this is supposed to do. The awk statement prints the
number of fields in the input record, and _wipe_device uses that as
a file name? What am I missing?
> +}
pretty much the entire output of this function is teed to $seq.full.
You could do that at the call site. i.e.
_check_mkfs .... | tee -a $seq.full
Even better:
> +
> +# === 4k physical 512b logical aligned
> +echo "===================" | tee -a $seq.full
> +echo "4k physical 512b logical aligned" | tee -a $seq.full
> +SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 128`
> +# sector size should default to 4k
> +_check_mkfs "" $SCSI_DEBUG_DEV
> +# blocksize smaller than physical sectorsize should revert to logical sectorsize
(missing a test case here?)
> +_put_scsi_debug_dev
(
echo "==================="
echo "4k physical 512b logical aligned"
SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 128`
# sector size should default to 4k
_check_mkfs "" $SCSI_DEBUG_DEV
# blocksize smaller than physical sectorsize should revert to logical sectorsize
_put_scsi_debug_dev
) | tee -a $seq.full
.....
> +
> +exit
status=0
exit
> +# Functions useful for tests on unique block devices
> +#
> +
> +_require_scsi_debug()
> +{
> + # make sure we have the module and it's not already used
> + modinfo scsi_debug 2>&1 > /dev/null || _notrun "scsi_debug module not found"
> + lsmod | grep -wq scsi_debug && _notrun "scsi_debug module in use"
> + # make sure it has the features we need
> + # logical/physical sectors plus unmap support all went in together
> + modinfo scsi_debug | grep -wq sector_size || _notrun "scsi_debug too old"
> +}
Might work for modules, but what about CONFIG_SCSI_DEBUG=y? I
thought you could do all this configuration stuff through the
/sys/bus/scsi/drivers/scsi_debug interface so you didn't need to
screw with modules and parameters?
> +
> +# Args: [physical sector size, [logical sector size, [unaligned(0|1), [size in megs]]]]
> +_get_scsi_debug_dev()
> +{
> + # Defaults to phys 512, logical 512, aligned
> + physical=${1-512}
> + logical=${2-512}
> + unaligned=${3-0}
> + size=${4-128}
> +
> + phys_exp=0
> + while [ $logical -lt $physical ]; do
> + let physical=physical/2
> + let phys_exp=phys_exp+1
> + done
> + opts="sector_size=$logical physblk_exp=$phys_exp lowest_aligned=$unaligned dev_size_mb=$size"
> + echo "scsi_debug options $opts" >> $seq.full
> + modprobe scsi_debug $opts
> + [ $? -eq 0 ] || _fail "scsi_debug modprobe failed"
> + sleep 1
> + device=`grep -wl scsi_debug /sys/block/sd*/device/model | awk -F / '{print $4}'`
> + echo "/dev/$device"
> +}
> +
> +_put_scsi_debug_dev()
> +{
> + sleep 1
> + rmmod scsi_debug || _fail "Could not remove scsi_debug module"
> +}
What is the sleep for?
Cheers,
Dave.
--
Dave Chinner
david@xxxxxxxxxxxxx
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
