This test uses the scsi_debug module to test mkfs against
various physical & logical sector sizes, and with aligned
and unaligned devices.
Check out the scenarios in the test, I think I have the right
outcomes specified...
Hope it's not looking too hacky.
Signed-off-by: Eric Sandeen <sandeen@xxxxxxxxxx>
---
diff --git a/279 b/279
new file mode 100755
index 0000000..b7ad622
--- /dev/null
+++ b/279
@@ -0,0 +1,115 @@
+#! /bin/bash
+# FS QA Test No. 279
+#
+# Test mkfs.xfs against various types of devices with varying
+# logical & physical sector sizes and offsets.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2012 Red Hat, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+# creator
+owner=sandeen@xxxxxxxxxx
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=0 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+. ./common.scsi_debug
+
+# real QA test starts here
+_supported_fs xfs
+_supported_os Linux
+
+_require_scsi_debug
+
+rm -f $seq.full
+
+_get_sector_size()
+{
+ xfs_db -c "sb 0" -c "p sectsize" $SCSI_DEBUG_DEV | awk '{print $3}'
+}
+
+_wipe_device()
+{
+ device=$1
+ dd if=/dev/zero of=$device bs=4k count=1 &> /dev/null
+}
+
+_check_mkfs()
+{
+ echo "===================" | tee -a $seq.full
+ echo "mkfs with opts: $@" | sed -e "s/\/dev\/sd./DEVICE/" | tee -a $seq.full
+ mkfs.xfs $@ >> $seq.full 2>&1
+ if [ $? -ne 0 ]; then
+ echo "Failed." | tee -a $seq.full
+ return
+ fi
+ echo "Passed." | tee -a $seq.full
+ echo -n "Got sector size: " | tee -a $seq.full
+ _get_sector_size | tee -a $seq.full
+ device=`echo $@ | awk '{print $NF}'`
+ _wipe_device $device
+}
+
+# === 4k physical 512b logical aligned
+echo "===================" | tee -a $seq.full
+echo "4k physical 512b logical aligned" | tee -a $seq.full
+SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 0 128`
+# sector size should default to 4k
+_check_mkfs "" $SCSI_DEBUG_DEV
+# blocksize smaller than physical sectorsize should revert to logical sectorsize
+_put_scsi_debug_dev
+
+
+# === 4k physical 512b logical unaligned
+echo "===================" | tee -a $seq.full
+echo "4k physical 512b logical unaligned" | tee -a $seq.full
+SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 512 1 128`
+# should fail on misalignment
+_check_mkfs "" $SCSI_DEBUG_DEV
+# should fall back to logical sector size with force
+_check_mkfs -f $SCSI_DEBUG_DEV
+# with 4k sector specified should fail without force
+_check_mkfs -s size=4096 $SCSI_DEBUG_DEV
+# with 4k sector specified should fall back to logical sector size with force
+_check_mkfs -s size=4096 -f $SCSI_DEBUG_DEV
+_put_scsi_debug_dev
+
+# === hard 4k physical / 4k logical
+echo "===================" | tee -a $seq.full
+echo "hard 4k physical / 4k logical" | tee -a $seq.full
+SCSI_DEBUG_DEV=`_get_scsi_debug_dev 4096 4096 0 128`
+# block size smaller than sector size should fail
+_check_mkfs -b size=2048 $SCSI_DEBUG_DEV
+# sector size smaller than physical sector size should fail
+_check_mkfs -s size=512 $SCSI_DEBUG_DEV
+_put_scsi_debug_dev
+
+exit
diff --git a/279.out b/279.out
new file mode 100644
index 0000000..f7734e0
--- /dev/null
+++ b/279.out
@@ -0,0 +1,31 @@
+QA output created by 279
+===================
+4k physical 512b logical aligned
+===================
+mkfs with opts: DEVICE
+Passed.
+Got sector size: 4096
+===================
+4k physical 512b logical unaligned
+===================
+mkfs with opts: DEVICE
+Failed.
+===================
+mkfs with opts: -f DEVICE
+Passed.
+Got sector size: 512
+===================
+mkfs with opts: -s size=4096 DEVICE
+Failed.
+===================
+mkfs with opts: -s size=4096 -f DEVICE
+Passed.
+Got sector size: 4096
+===================
+hard 4k physical / 4k logical
+===================
+mkfs with opts: -b size=2048 DEVICE
+Failed.
+===================
+mkfs with opts: -s size=512 DEVICE
+Failed.
diff --git a/common.scsi_debug b/common.scsi_debug
new file mode 100644
index 0000000..9f9177c
--- /dev/null
+++ b/common.scsi_debug
@@ -0,0 +1,62 @@
+##/bin/bash
+#
+# Copyright (c) 2012 Red Hat, Inc
+# All Rights Reserved.
+#
+# Written by Eric Sandeen <sandeen@xxxxxxxxxx>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+#
+# Functions useful for tests on unique block devices
+#
+
+_require_scsi_debug()
+{
+ # make sure we have the module and it's not already used
+ modinfo scsi_debug 2>&1 > /dev/null || _notrun "scsi_debug module not found"
+ lsmod | grep -wq scsi_debug && _notrun "scsi_debug module in use"
+ # make sure it has the features we need
+ # logical/physical sectors plus unmap support all went in together
+ modinfo scsi_debug | grep -wq sector_size || _notrun "scsi_debug too old"
+}
+
+# Args: [physical sector size, [logical sector size, [unaligned(0|1), [size in megs]]]]
+_get_scsi_debug_dev()
+{
+ # Defaults to phys 512, logical 512, aligned
+ physical=${1-512}
+ logical=${2-512}
+ unaligned=${3-0}
+ size=${4-128}
+
+ phys_exp=0
+ while [ $logical -lt $physical ]; do
+ let physical=physical/2
+ let phys_exp=phys_exp+1
+ done
+ opts="sector_size=$logical physblk_exp=$phys_exp lowest_aligned=$unaligned dev_size_mb=$size"
+ echo "scsi_debug options $opts" >> $seq.full
+ modprobe scsi_debug $opts
+ [ $? -eq 0 ] || _fail "scsi_debug modprobe failed"
+ sleep 1
+ device=`grep -wl scsi_debug /sys/block/sd*/device/model | awk -F / '{print $4}'`
+ echo "/dev/$device"
+}
+
+_put_scsi_debug_dev()
+{
+ sleep 1
+ rmmod scsi_debug || _fail "Could not remove scsi_debug module"
+}
diff --git a/group b/group
index 6f2d748..7a91f41 100644
--- a/group
+++ b/group
@@ -392,3 +392,4 @@ deprecated
276 auto rw metadata
277 auto ioctl quick metadata
278 repair auto
+279 auto mkfs
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
