On Wed, 23 Feb 2011, Emmanuel Florac wrote:
Le Wed, 23 Feb 2011 10:29:15 -0500 (EST)
Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx> écrivait:
/c0 Firmware Version = FE9X 4.10.00.007
The latest is:
9.5.1-9650-Upgrade.zip
9.5.2-9650-Upgrade.zip
9.5.3-9650-Upgrade.zip
9650SE_9690SA_firmware_beta_fw4.10.00.016.zip
9650SE_9690SA_firmware_beta_fw_4.10.00.019.zip <- latest
Hum well, this is beta, I'd rather stick to released firmware :) His
firmware is actually the latest stable version for the 9650.
Yes, but it specifically addresses issue with resets:
019:
SCR FIRM03219 Pchip reset interrupt not handled
SCR FIRM03220 Put parity segment to free state completely when deallocate unused parity segment
016:
SCR 2196: Unexpected controller soft resets
Fixed an issue with regards to deferral of write and read commands to help eliminate unexpected soft resets.
SCR 2217: Incomplete unit after multiple power failures when a RAID 1 unit is initializing after a rebuild.
This issue is fixed in this firmware version.
SCR 819: Controller may assert when cache is disabled in a RAID5/RAID6 configuration under heavy I/O load.
This issue is fixed in this firmware version.
SCR 2214: Performance drops during SES polling.
Fixed the issue where performance drops when a Storage Enclosure Processor (SEP) takes up to 700-800 msec to respond to SES polling.
Justin.
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
