Hi Emmanuel, Thanks for your prompt reply. On Wed, Feb 23, 2011 at 3:46 PM, Emmanuel Florac <eflorac@xxxxxxxxxxxxxx> wrote: > > What firmware version are you using? > > ( tw_cli /cX show firmware ) # tw_cli /c0 show firmware /c0 Firmware Version = FE9X 4.10.00.007 > > Augh. That sounds pretty bad. What does " tw_cli /cX/uY show all" look > like? Yes, it is bad - a decision has been made to replace these disks with "enterprise"-versions (without TLER/ERC problems etc). Tw_cli produces this output for the volume: # tw_cli /c0/u0 show all /c0/u0 status = OK /c0/u0 is not rebuilding, its current state is OK /c0/u0 is not verifying, its current state is OK /c0/u0 is initialized. /c0/u0 Write Cache = on /c0/u0 Read Cache = Intelligent /c0/u0 volume(s) = 1 /c0/u0 name = xxx /c0/u0 serial number = yyy /c0/u0 Ignore ECC policy = off /c0/u0 Auto Verify Policy = off /c0/u0 Storsave Policy = protection /c0/u0 Command Queuing Policy = on /c0/u0 Rapid RAID Recovery setting = all /c0/u0 Parity Number = 2 Unit UnitType Status %RCmpl %V/I/M Port Stripe Size(GB) ------------------------------------------------------------------------ u0 RAID-6 OK - - - 256K 12572.8 u0-0 DISK OK - - p12 - 1396.97 u0-1 DISK OK - - p21 - 1396.97 u0-2 DISK OK - - p14 - 1396.97 u0-3 DISK OK - - p15 - 1396.97 u0-4 DISK OK - - p16 - 1396.97 u0-5 DISK OK - - p17 - 1396.97 u0-6 DISK OK - - p18 - 1396.97 u0-7 DISK OK - - p19 - 1396.97 u0-8 DISK OK - - p20 - 1396.97 u0-9 DISK OK - - p0 - 1396.97 u0-10 DISK OK - - p22 - 1396.97 u0/v0 Volume - - - - - 12572.8 Best regards Erik Gulliksson _______________________________________________ xfs mailing list xfs@xxxxxxxxxxx http://oss.sgi.com/mailman/listinfo/xfs
