hi sir
i have freshly installed the RHL 8 on the desktop and its version is Red Hat Linux release: 4.2.0-72 and my XFree86 version is XFree86 Version 4.2.0 . when i first started the GUI mode ( startx ) the monitor screen got garbled so i logged into the terminal by typring ctrl+alt+F2 there i entered the file XF86Config file in /etc/X11 and try to change some settings in that file in Hsync and Hsync section and rebooted the pc , that time i reported a problem in the terminal as XFree86.report.log which i have sent and it is stored in /va/log folder . so that from here i am not able to enter for Startx . so i have done some changes in the folder /etc/X11 and try to replace the XF86Config file to its ol
d
settings and rebooted the pc . when i type startx i am getting this problem and stops going to GUI mode :
giving up
xinit : No such file or directory ( errno : 2 ) : unable to connect to X server
xinit : No such process ( errno : 3 ) : server error
what is the problem with this and how to solve this problem . i am attaching the files of config file and report file .
what is the steps to reload the X in RHL 8
Regards
SOMU
Soma Shekar.B , System Admin
RASS IT Solutions Private Limited
389/1 , 42nd cross , 7th main
5th Block , Jayanagar
Bangalore - 560 041, India
Phone : 98456 49540
Email : somashekar@xxxxxxxxxx
web: www.rassit.com
Enjoy this Diwali with Y! India Click here
Attachment:
XFree86.0.log
Description: 2563046813-XFree86.0.log
Attachment:
XFree86.0.log.doc
Description: 1878238240-XFree86.0.log.doc
Attachment:
XFree86.1.log.doc
Description: 1621357275-XFree86.1.log.doc
Attachment:
XF86Config.doc
Description: 207248218-XF86Config.doc
# File generated by anaconda.
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "dri"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
#Option "XkbOptions" ""
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us" #Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
DisplaySize 2 0
HorizSync 28.5 - 33.5
VertRefresh 43.0 - 72.0
Option "dpms"
EndSection
Section "Device"
# no known options
#BusID
Identifier "SiS 6326"
Driver "sis"
VendorName "SiS 6326"
BoardName "SiS 6326"
VideoRam 4096
Option "swcursor" ""
EndSection
Section "Screen"
Identifier "Screen0"
Device "SiS 6326"
Monitor "Monitor0"
DefaultDepth 8
SubSection "Display"
Depth 16
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
