On Mon, Mar 28, 2005 at 09:11:24PM -0800, Grant W Quinlan wrote: >I believe that the problem is because my hp-vf17 flat panel moniter is >not a recognized type. >Attached are the log file and the PCI bus scan output to help you update >the configuration files. > >Until then, what would I need to do to manually update my config files >to get it working as a generic 1280x1024 72Hz 32bit color monitor? >XFree86 Version 4.1.0.1 / X Window System >(protocol Version 11, revision 0, vendor release 6510) >Release Date: 21 December 2001 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/FAQ) You are attempting to run a rather old version of XFree86 on new hardware. >(--) PCI:*(0:2:0) Intel unknown chipset (0x2582) rev 4, Mem @ 0xcfe00000/19, 0xd0000000/28, 0xcfdc0000/18, I/O @ 0xcc00/3 You'll need XFree86 4.5.0 for the Intel 915G. David _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86