Hello list, I have some problems with the configuration and installation of an Elo Systems touchscreen under Fedora Core 2. I'm using: X Protocol Version 11, Revision 0, Release 6.7. Following the instructions on Elo's site at http://www.elotouch.com/Support/linux.asp I added the needed options in the xorg.conf file: <snip> Section "ServerLayout"     Identifier   "Default Layout"     Screen   Â0 Â"Screen0" 0 0     InputDevice  Â"Mouse0" "CorePointer"     InputDevice  Â"Keyboard0" "CoreKeyboard"     Inputdevice  Â"touchscreen1" "SendCoreEvents" EndSection ######################### # ÂTouchscreen section Â# ######################### Section "Inputdevice"     Identifier "touchscreen1"     Driver "elographics"     Option "Device" "/dev/ttyS0"     Option "AlwaysCore"     Option "screenno" "0"     Option "MinX" "600"     Option "MaxX" "3600"     Option "MinY" "600"     Option "MaxY" "3600"     Option "UntouchDelay" "3"     Option "ReportDelay" "1" EndSection </snip> I detect the touchscreen at /det/ttyS0, but in the Xorg.0.log file I get the following messages and errors: <snip> (II) LoadModule: "elographics" (II) Loading /usr/X11R6/lib/modules/input/elographics_drv.o (II) Module elographics: vendor="X.Org Foundation"     compiled for 6.7.0, module version = 1.0.0     Module class: X.Org XInput Driver     ABI class: X.Org XInput driver, version 0.4 (**) Option "AlwaysCore" (**) TOUCHSCREEN: always reports core events (**) Elographics X device name: TOUCHSCREEN (**) Option "ScreenNo" "0" (**) Elographics associated screen: 0 (**) Option "UntouchDelay" "3" (**) Elographics untouch delay: 30 ms (**) Option "ReportDelay" "1" (**) Elographics report delay: 10 ms (**) Option "MaxX" "3600" (**) Elographics maximum x position: 3600 (**) Option "MinX" "600" (**) Elographics minimum x position: 600 (**) Option "MaxY" "3600" (**) Elographics maximum y position: 3600 (**) Option "MinY" "600" (**) Elographics minimum y position: 600 (**) Elographics device will work in Landscape mode (II) XINPUT: Adding extended input device "TOUCHSCREEN" (type: Elographics TouchScreen) //this is repeated a lot of times (--) Elographics touchscreen is a DuraTouch, connected through a serial link. (--) The controller is a model E281-2310, firmware revision 1.3. Unable to change Elographics touchscreen operating mode Not at the specified rate or model 2310, will continue Elographics: Dropping one byte in an attempt to synchronize: ' Elographics: Dropping one byte in an attempt to synchronize: ' Elographics: Dropping one byte in an attempt to synchronize: ' Elographics: Dropping one byte in an attempt to synchronize: ' Unable to ask Elographics touchscreen identification </snip> Since a touch on the screen is detected at the port, and the server starts - can you tell me where's my mistake? Has anyone configured an Elo touchscreen under Fedora Core 2? Or at least tell me how to fix this. Thanks. -- Cyberly yours, Petar Nedyalkov Devoted Orbitel Fan :-) PGP ID: 7AE45436 PGP Public Key: http://bu.orbitel.bg/pgp/bu.asc PGP Fingerprint: 7923 8D52 B145 02E8 6F63 8BDA 2D3F 7C0B 7AE4 5436
Attachment:
pgpABcMUVouUO.pgp
Description: signature
