It looks like Rh9 and i got off on the wrong foot. The installation went pretty smooth and i fell in love with the bluecurve interface, the moment i saw it. Unfortunately this love didn't last long enough and it only hit me where it hurts the most !! I was able to dual-boot with WinMe and the grub boot loader did a neat job by allowing me to select the OS. On the first run, it wud ask me to create a new user, which i did. Everything was fine until after a few sessions, while switching from one user to another, the screen blacked out, throwing the following message. " I cannot start X server (your graphical interface). It is likely that it is not set up correctly. Would you like to view the X server output to diagnose the problem" (Im still not able to figure out, how can the settings change, without the consent of the root user. This is kinda wierd. This has happened over and over now, everytime making me install RH9. Im able to access GUI only for a few login sessions after which im greeted by the above msg. I tried every trick that i know ( including redhat-config-xfree86 command) but no luck yet.).The migration from RH7.3 to 9 wasn't at all pleasant for me.Im now considering to switch back to RH7.3 . I'd appreciate if anyone suggests a workaround for this issue. Should i give Fedora Core 1 a chance or would it do no good as it is cosmetically akin to RH9?? Thanks in advance for all your suggestions. When i clicked on Yes, i got the following log file. XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-6 (bhcompile@xxxx) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Feb 27 10: 06:59 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Aug 27 09:01:58 2004 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80000050, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7120 card 8086,7120 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7121 card 8086,7121 rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2415 card 11d4,0048 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:0a:0: chip 11d4,1805 card 11d4,1805 rev 00 class 07,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 1 prefetchable memory range: [0] -1 0 0xdc000000 - 0xdc0fffff (0x100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:1:0) Intel Corp. 82810 CGC [Chipset Graphics Controller] rev 3, Mem @ 0xd8000000/26, 0xdc100000/19 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [1] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B) [2] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) [3] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [4] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [5] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [6] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [1] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B) [2] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) [3] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [4] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [5] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [6] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [6] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B) [7] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [10] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [11] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [12] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [13] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] (II) LoadModule: "dbe" (WW) Warning, couldn't open module dbe (II) UnloadModule: "dbe" (EE) Failed to load module "dbe" (module does not exist, 0) (II) LoadModule: "extmod" (WW) Warning, couldn't open module extmod (II) UnloadModule: "extmod" (EE) Failed to load module "extmod" (module does not exist, 0) (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.0.2 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "glx" (WW) Warning, couldn't open module glx (II) UnloadModule: "glx" (EE) Failed to load module "glx" (module does not exist, 0) (II) LoadModule: "record" (WW) Warning, couldn't open module record (II) UnloadModule: "record" (EE) Failed to load module "record" (module does not exist, 0) (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.3.0, module version = 2.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "dri" (WW) Warning, couldn't open module dri (II) UnloadModule: "dri" (EE) Failed to load module "dri" (module does not exist, 0) (II) LoadModule: "i810" (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o (II) Module i810: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.3.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (WW) Warning, couldn't open module mouse (II) UnloadModule: "mouse" (EE) Failed to load module "mouse" (module does not exist, 0) (II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810- dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G (II) Primary Device is: PCI 00:01:0 (--) Assigning device section with no busID to primary device (--) Chipset i810 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [6] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B) [7] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [10] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [11] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [12] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [13] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [6] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B) [7] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) [8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [13] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [14] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [15] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [16] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [17] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [18] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) I810(0): Depth 24, (--) framebuffer bpp 24 (==) I810(0): RGB weight 888 (==) I810(0): Default visual is TrueColor (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) I810(0): initializing int10 (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 2.0 (II) I810(0): VESA VBE Total Mem: 1024 kB (II) I810(0): VESA VBE OEM: Intel810(TM) Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 3.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: i810 Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) I810(0): VESA VBE DDC supported (II) I810(0): VESA VBE DDC Level 2 (II) I810(0): VESA VBE DDC transfer in appr. 1 sec. (II) I810(0): VESA VBE DDC read successfully (II) I810(0): Manufacturer: VSC Model: 4e41 Serial#: 3563 (II) I810(0): Year: 2000 Week: 37 (II) I810(0): EDID Version: 1.2 (II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) I810(0): Signal levels configurable (II) I810(0): Sync: Separate (II) I810(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24 (II) I810(0): Gamma: 2.60 (II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) I810(0): First detailed timing is preferred mode (II) I810(0): redX: 0.635 redY: 0.333 greenX: 0.285 greenY: 0.595 (II) I810(0): blueX: 0.152 blueY: 0.063 whiteX: 0.283 whiteY: 0.298 (II) I810(0): Supported VESA Video Modes: (II) I810(0): 720x400@70Hz (II) I810(0): 720x400@88Hz (II) I810(0): 640x480@60Hz (II) I810(0): 640x480@67Hz (II) I810(0): 640x480@72Hz (II) I810(0): 640x480@75Hz (II) I810(0): 800x600@56Hz (II) I810(0): 800x600@60Hz (II) I810(0): 800x600@72Hz (II) I810(0): 800x600@75Hz (II) I810(0): 832x624@75Hz (II) I810(0): 1024x768@87Hz (interlaced) (II) I810(0): 1024x768@60Hz (II) I810(0): 1024x768@70Hz (II) I810(0): 1024x768@75Hz (II) I810(0): Manufacturer's mask: 0 (II) I810(0): Supported Future Video Modes: (II) I810(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) I810(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) I810(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) I810(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) I810(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) I810(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) I810(0): Supported additional Video Mode: (II) I810(0): clock: 94.5 MHz Image Size: 310 x 230 mm (II) I810(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0 (II) I810(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0 (II) I810(0): Serial No: AN03703563 (II) I810(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz (II) I810(0): Monitor name: E70-3 (--) I810(0): Chipset: "i810" (--) I810(0): Linear framebuffer at 0xD8000000 (--) I810(0): IO registers at addr 0xDC100000 (II) I810(0): I810CheckAvailableMemory: 95228k available (**) I810(0): Will alloc AGP framebuffer: 16384 kByte (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) (II) I810(0): Monitor0: Using hsync range of 30.00-70.00 kHz (II) I810(0): Monitor0: Using vrefresh range of 50.00-120.00 Hz (II) I810(0): Clock range: 12.00 to 136.00 MHz (II) I810(0): Not using default mode "320x175" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "320x200" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "360x200" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "320x240" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "320x240" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "320x240" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "320x240" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "400x300" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "400x300" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "400x300" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "400x300" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "400x300" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (unknown reason) (II) I810(0): Not using default mode "512x384" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "512x384" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "512x384" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "512x384" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "512x384" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "576x432" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "640x480" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1280x960" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "640x480" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "640x512" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1280x1024" (hsync out of range) (II) I810(0): Not using default mode "640x512" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1280x1024" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "640x512" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1792x1344" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "896x672" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1792x1344" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "896x672" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1856x1392" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "928x696" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1856x1392" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "928x696" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1920x1440" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "960x720" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1920x1440" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "960x720" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "416x312" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "576x384" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1152x864" (hsync out of range) (II) I810(0): Not using default mode "576x432" (bad mode clock/ interlace/doublescan) (WW) (1400x1050,Monitor0) mode clock 122MHz exceeds DDC maximum 110MHz (II) I810(0): Not using default mode "700x525" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1400x1050" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "700x525" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1400x1050" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "700x525" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1400x1050" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "700x525" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "800x512" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1920x1200" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "960x600" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1920x1440" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "960x720" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "2048x1536" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "2048x1536" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "2048x1536" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (bad mode clock/ interlace/doublescan) (II) I810(0): Not using default mode "1400x1050" (width too large for virtual size) (II) I810(0): Not using default mode "1280x1024" (width too large for virtual size) (II) I810(0): Not using default mode "1280x960" (width too large for virtual size) (II) I810(0): Not using default mode "1152x864" (width too large for virtual size) (II) I810(0): Not using default mode "1152x768" (width too large for virtual size) (--) I810(0): Virtual size is 1024x768 (pitch 1024) (**) I810(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) I810(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (**) I810(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) I810(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) I810(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) I810(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (**) I810(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz (II) I810(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (**) I810(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) I810(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (**) I810(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) I810(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) I810(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) I810(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) I810(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) I810(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (**) I810(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) I810(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) I810(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) I810(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) I810(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) I810(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) I810(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) I810(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) I810(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) I810(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (**) I810(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) I810(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) I810(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) I810(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (**) I810(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) I810(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (**) I810(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) I810(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (**) I810(0): Display dimensions: (320, 240) mm (**) I810(0): DPI set to (81, 81) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable. (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xdc100000 - 0xdc17ffff (0x80000) MS[B] [1] 0 0 0xd8000000 - 0xdbffffff (0x4000000) MS[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [8] -1 0 0xdc100000 - 0xdc17ffff (0x80000) MX[B](B) [9] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B) [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [16] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [17] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] [18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] [19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (==) I810(0): Write-combining range (0xd8000000,0x4000000) (II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) I810(0): Setting dot clock to 94.5 MHz [ 0x3d 0xe 0x20 ] [ 63 16 2 ] (II) I810(0): chose watermark 0x22218000: (tab.freq 94.5) (II) I810(0): xf86BindGARTMemory: bind key 0 at 0x00000000 (pgoffset 0) (WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed (Cannot allocate memory) (II) I810(0): No physical memory available for 4194304 bytes of DCACHE (II) I810(0): xf86BindGARTMemory: bind key 1 at 0x01000000 (pgoffset 4096) (II) I810(0): Adding 512 scanlines for pixmap caching (II) I810(0): Allocated Scratch Memory (II) I810(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Horizontal and Vertical Lines Offscreen Pixmaps (==) I810(0): Backing store disabled (==) I810(0): Silken mouse enabled (**) Option "dpms" (**) I810(0): DPMS enabled (==) I810(0): Direct rendering disabled (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (EE) No Input driver matching `mouse' (II) Keyboard "Keyboard0" handled by legacy driver (EE) No Input driver matching `mouse' (WW) No core pointer registered No core pointer Fatal server error: failed to initialize core devices When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xxxxx (II) I810(0): xf86UnbindGARTMemory: unbind key 0 (II) I810(0): xf86UnbindGARTMemory: unbind key 1 regards, Shardul _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
