Sorry guys. I have sent the X config of the fbdev driver. I guess that wont give
you a lot of hint:) Sorry.
Here is the X config file, that I was mentioning in the earlier post, that was
created with the XFree86 -configure command if I remember well, just I modified
the mouse and the HorizSync and VertRefresh values, so the screen will use the
full size.
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
EndSection
Section "Monitor"
#DisplaySize 240 180 # mm
Identifier "Monitor0"
VendorName "TOS"
ModelName "5082"
HorizSync 28-49
VertRefresh 60
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "PciRetry" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "SetMClk" # <freq>
#Option "MUXThreshold" # <i>
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "NoMMIO" # [<bool>]
#Option "NoPciBurst" # [<bool>]
#Option "MMIOonly" # [<bool>]
#Option "CyberShadow" # [<bool>]
#Option "CyberStretch" # [<bool>]
#Option "XvHsync" # <i>
#Option "XvVsync" # <i>
#Option "XvBskew" # <i>
#Option "XvRskew" # <i>
#Option "FpDelay" # <i>
#Option "Display1400" # [<bool>]
#Option "Display" # [<str>]
#Option "GammaBrightness" # [<str>]
#Option "TVChipset" # [<str>]
#Option "TVSignal" # <i>
Identifier "Card0"
Driver "trident"
VendorName "Trident Microsystems"
BoardName "Cyber 9540"
VideoRam 4096
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
(END)
Quoting Benedek Frank <bence@xxxxxxxxxxxxxx>:
> Hi
>
> I have a Toshiba Portege 7140ct, that comes with the infamous Cyberblade
> e4-128
> card. The linux I run is Debian Sarge - testing. Kernel is 2.6.5. However I
> tried it with many other distros and kernels, so that seems to be not the
> real
> problem. Correct me if I am wrong.
>
> I tried XFree86 versions 4.2 4.3 4.4. I also tried to use alanh's driver that
> I
> found, trident_drv.o.
>
> The problem is that the system runs well, but I get lockups ocasionally, and
> I
> cannot do anything. If I am currently ssh-d into the laptop from another
> machine, that client dies off as well. No message shows up in the
> /var/log/messages or syslog files what so every. When the lockup happenes,
> the
> screen freezes to the current displayed image. It wont black out, etc.
> I have tried numerous configurations in the XFree86Config-4 file but none
> seems
> to work. I tried to force it to use 16bit depth, but it still freezes. I
> couldnt make any connection between events and freezes, so I coudlnt
> eliminate
> what might have caused it. When I run the fbdev friver, and include the
> vga=791
> line in lilo, all goes well, just the video is really slow. I cannot watch
> DVD's etc. If anybody has a solution please let me know. If I can modify the
> driver with anything at all, inform me please, so I can fix this laptop, as
> it
> is crippled at this stage.
>
> scanpci shows this:
>
> pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x1023 device 0x9540
> Trident Microsystems Cyber 9540
>
> Yes, it is recognized as a Cyberblade 9540. I dont know why.
>
> Here is the current X config file, that I created by running the
> xfree86 -configure
>
> and modifying it a little, the mouse I have to modify, and include a
> horizsync
> and vertrefresh commands, or the screen will be little.
>
> Section "ServerLayout"
> Identifier "XFree86 Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> EndSection
>
> Section "Module"
> Load "extmod"
> # Load "xie"
> Load "pex5"
> Load "glx"
> Load "dri"
> Load "GLcore"
> Load "dbe"
> Load "record"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "keyboard"
> Option "XkbLayout" "us"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "PS/2"
> Option "Device" "/dev/psaux"
> Option "Emulate3Buttons"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> EndSection
>
> Section "Device"
> Section "Device"
> ### Available Driver options are:-
> #Option "SWcursor"
> #Option "HWcursor"
> #Option "PciRetry"
> #Option "SetMClk"
> #Option "MUXThreshold"
> #Option "ShadowFB"
> Option "CyberShadow"
> #Option "NoMMIO"
> Identifier "Trident Cyber 9540"
> Driver "fbdev"
> VendorName "Trident"
> BoardName "Cyber 9540"
> BusID "PCI:1:0:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Trident Cyber 9540"
> Monitor "Monitor0"
> SubSection "Display"
> Depth 1
> EndSubSection
> SubSection "Display"
> Depth 4
> EndSubSection
> SubSection "Display"
> Depth 8
> EndSubSection
> SubSection "Display"
> Depth 15
> EndSubSection
> SubSection "Display"
> Depth 16
> EndSubSection
> SubSection "Display"
> Depth 24
> EndSubSection
> EndSection
>
> Section "DRI"
> EndSection
>
>
> (END)
>
>
> Thanks a lot
>
> Ben
>
>
>
>
>
>
>
>
> _______________________________________________
> XFree86 mailing list
> XFree86@xxxxxxxxxxx
> http://XFree86.Org/mailman/listinfo/xfree86
>
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
