Blank LCD display

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I am using X version 4.3.0 on Linux kernel version 2.4.10-1. I am trying to get a LCD display working, and am running into problems with X. When I start X windows, the LCD display goes blank. When I exit X, my LCD display comes back. I have checked, and my kernel was built without APM_DISPLAY_BLANK set. The display is 6 1/2" diagonal and the resolution is 640x480. 

Does anyone have an idea what the problem could be? What can I do to further diagnose this problem?

Regards,
Marlena Miller

An excerpt from my XF86Cconfig file follows:

===========================
Section "Monitor"

# The identifier line must be present.

    Identifier	"Optrex LCD"
    HorizSync	30-115         # multisync
    VertRefresh	50-60        # multisync

# Modes can be specified in two formats.  A compact one-line format, or
# a multi-line format.
##########################################################################

Modeline "640x480-85"    40.5   640  663  752  832   480  481  484  509
Modeline "640x480-75"    31.5   640  656  720  840   480  481  484  500
Modeline "640x480-72"    31.5   640  663  704  832   480  489  492  520
Modeline "640x480-60"    25.175 640  656  752  800   480  490  492  525

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
	Identifier	"Geode"
	Driver		"nsc"
	Option		"HWcursor"
	Option		"OffScreenMemory"
	VideoRam	4096
EndSection


# **********************************************************************
# Screen sections.
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.

Section "Screen"

# The Identifier, Device and Monitor lines must be present

    Identifier	"Screen 0"
    Device	"Geode"
    Monitor	"Optrex LCD"

# The favoured Depth and/or Bpp may be specified here
# CRT modes
    DefaultDepth 16

    SubSection "Display"
        Depth		8
        Modes		"640x480-85" "640x480-75" "640x480-72" "640x480-60"
    EndSubsection

    SubSection "Display"
        Depth		16
	Modes		"640x480-85" "640x480-75" "640x480-72" "640x480-60"
    EndSubsection

EndSection

_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux