Have you tried without uncommenting any of the options? If so, and it couldn't figure out things on its own, try setting either MemBase or IOBase to that PCI memory area (f5000000). Strange that it thinks your card has a 16M ROM... On Mon, Jun 21, 2004 at 07:47:28AM -0700, Scott Kiesling wrote: > Duh. OK I get it now. I've never had any pci problems so I'm learning here, > bear with me! Here is the output for the card: > > 0000:00:10.0 VGA compatible controller: Cirrus Logic GD 5434-8 [Alpine] (rev > 26) (prog-if 00 [VGA]) > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 9 > Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M] > Expansion ROM at <unassigned> [disabled] [size=16M] > > Thanks for any insights! > > SFK > > --- Ryan Underwood <nemesis-lists@xxxxxxxxxxxx> wrote: > > > > On Fri, Jun 18, 2004 at 08:18:13PM -0700, Scott Kiesling wrote: > > > I am trying to configure xfree on an old machine which I have just > > installed > > > Gentoo on, but can't get it to start. The errors from the xfree log come up > > > like this: > > > > > > (EE) CIRRUS(0): No valid MMIO address in PCI config space > > > (EE) CIRRUS(0): I2C initialization failed > > > > Can you lspci -vvv and post the block corresponding to your card? Also, > > is this a PCI or ISA card? > > > > -- > > Ryan Underwood, <nemesis@xxxxxxxxxxxx> > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 > -- Ryan Underwood, <nemesis@xxxxxxxxxxxx>
Attachment:
signature.asc
Description: Digital signature
