Hello list
I just subscribed to this list in hopes of getting some help with a problem
I'm having with deadkeys.
I'm using a thin client project called PXES ( pxes.sourceforge.net ) with an
Citrix ICA client.
The dead keys like ü,û,ñ,ö,ä etc aren't working when I use norwegian
keyboard.
The strange thing is that if I use swedish keyboard the keys work. (Swedish
is pretty much identical to norwegian except a few chars)
All the dead keys work as intended if I go to the console, but not in X. Its
like X just ignores the ~ (tilde) key alltogether.
On my fat client (Red Hat 9 with EVERYTHING installed) these keys work fine
in X.
In a fit of desperation I copied all the files from /usr/X11R6/lib/X11 on my
fat client to the thin client. This increased the thin client image by 50+
Megabytes....making it kinda useless as a thin client....BUT...then the
deadkeys worked! :p
So...I need to figure out what files are needed. Anyone got a clue ? Font
files ?
I have attached my XFfree86 config file, the logfile and the symbols/no file
in this mail.
Any help or tips are greatly appreciated :)))
Regards,
Einar Eliassen
_____________________________________________
The contents of this e-mail are confidential to the person(s) or
organisation(s) to whom it is addressed. No-one else may copy or forward all
or any of it in any form without the prior written consent of the
originator. If you have received this e-mail in error, please contact the
sender and delete the material from any computer.
// $Xorg: no,v 1.3 2000/08/17 19:54:43 cpqbld Exp $
// $XFree86: xc/programs/xkbcomp/symbols/no,v 3.8 2000/11/02 19:10:59 dawes Exp $
partial alphanumeric_keys
xkb_symbols "basic" {
// Describes the differences between a very simple en_US
// keyboard and a Norwegian keyboard with dead key support
// and all of ISO-8859-1 characters available.
name[Group1]= "Norwegian";
key <TLDE> { [ bar, section ],
[ brokenbar, paragraph ]};
key <LSGT> { [ less, greater ],
[ onehalf, threequarters ]};
key <SPCE> { [ space, space ],
[ nobreakspace, nobreakspace ]};
key <AE01> { [ 1, exclam ],
[ exclamdown, onesuperior ]};
key <AE02> { [ 2, quotedbl ],
[ at, twosuperior ]};
key <AE03> { [ 3, numbersign ],
[ sterling, threesuperior ]};
key <AE04> { [ 4, currency ],
[ dollar, onequarter ]};
key <AE05> { [ 5, percent ],
[ NoSymbol, cent ]};
key <AE06> { [ 6, ampersand ],
[ yen, NoSymbol ]};
key <AE07> { [ 7, slash ],
[ braceleft, division ]};
key <AE08> { [ 8, parenleft ],
[ bracketleft, guillemotleft ]};
key <AE09> { [ 9, parenright ],
[ bracketright, guillemotright ]};
key <AE10> { [ 0, equal ],
[ braceright, degree ]};
key <AB08> { [ comma, semicolon ],
[ dead_cedilla, dead_ogonek ]};
key <AB09> { [ period, colon ],
[ periodcentered, dead_abovedot ]};
key <AB03> { [ c, C ],
[ copyright, NoSymbol ]};
key <AB10> { [ minus, underscore ],
[ hyphen, macron ]};
key <AC01> { [ a, A ],
[ ordfeminine, masculine ]};
key <AC03> { [ d, D ],
[ eth, ETH ]};
key <AD03> { [ e, E ],
[ EuroSign, cent ]};
key <AD04> { [ r, R ],
[ registered, NoSymbol ]};
key <AD05> { [ t, T ],
[ thorn, THORN ]};
key <AD08> { [ i, I ],
[ NoSymbol, NoSymbol ]};
key <AD09> { [ o, O ],
[ oe, OE ]};
key <AC10> { [ oslash, Ooblique ]};
key <AE11> { [ plus, question ],
[ plusminus, questiondown ]};
key <AC11> { [ ae, AE ]};
key <BKSL> { [ apostrophe, asterisk ],
[dead_doubleacute, multiply ]};
key <AD11> { [ aring, Aring ]};
key <AE12> { [ backslash, dead_grave ],
[ dead_acute, notsign ]};
key <AD12> { [ dead_diaeresis, dead_circumflex ],
[ dead_tilde, dead_caron ]};
// End alphanumeric section
// begin modifier mappings
modifier_map Shift { Shift_L };
modifier_map Lock { Caps_Lock };
modifier_map Control{ Control_L };
modifier_map Mod3 { Mode_switch };
};
partial alphanumeric_keys
xkb_symbols "Sundeadkeys" {
// For naming consistency
include "no(basic)"
};
partial alphanumeric_keys
xkb_symbols "sundeadkeys" {
// For naming consistency
include "no(Sundeadkeys)"
};
partial alphanumeric_keys
xkb_symbols "nodeadkeys" {
// Modifies the basic Norwegian layout to eliminate dead keys
include "no(basic)"
key <AE12> { [ backslash, grave ],
[ acute, ogonek ] };
key <AD12> { [ diaeresis, asciicircum ],
[ asciitilde, macron ] };
};XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.7-10smp i686 [ELF]
Build Date: 20 March 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.0.log", Time: Thu Jun 17 18:38:28 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Monitor 1"
(**) | |-->Device "Device 1"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "no"
(**) XKB: layout: "no"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "DontZap"
(++) using VT number 5
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 8086,1229 card 8086,000c rev 08 class 02,00,00 hdr 00
(II) PCI: 00:0e:0: chip 125d,1969 card 50b2,1113 rev 01 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 102b,0521 card 102b,ff03 rev 03 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfe000000 - 0xfebfffff (0xc00000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) Matrox Graphics, Inc. MGA G200 AGP rev 3, Mem @ 0xf6000000/24, 0xfebf8000/14, 0xfe000000/23
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B]
[1] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B]
[2] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[3] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[4] -1 0 0xfebf8000 - 0xfebfbfff (0x4000) MX[B](B)
[5] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[6] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[7] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[8] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[9] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[10] -1 0 0x0000d400 - 0x0000d43f (0x40) IX[B]
[11] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[B]
[12] -1 0 0x0000f800 - 0x0000f81f (0x20) IX[B]
[13] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B]
[1] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B]
[2] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[3] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[4] -1 0 0xfebf8000 - 0xfebfbfff (0x4000) MX[B](B)
[5] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[6] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[7] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[8] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[9] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[10] -1 0 0x0000d400 - 0x0000d43f (0x40) IX[B]
[11] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[B]
[12] -1 0 0x0000f800 - 0x0000f81f (0x20) IX[B]
[13] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B]
[6] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B]
[7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[8] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[9] -1 0 0xfebf8000 - 0xfebfbfff (0x4000) MX[B](B)
[10] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[14] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[15] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[17] -1 0 0x0000d400 - 0x0000d43f (0x40) IX[B]
[18] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[B]
[19] -1 0 0x0000f800 - 0x0000f81f (0x20) IX[B]
[20] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
mgag550
(II) Primary Device is: PCI 01:00:0
(--) Chipset mgag200 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B]
[6] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B]
[7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[8] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[9] -1 0 0xfebf8000 - 0xfebfbfff (0x4000) MX[B](B)
[10] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[14] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[15] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[17] -1 0 0x0000d400 - 0x0000d43f (0x40) IX[B]
[18] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[B]
[19] -1 0 0x0000f800 - 0x0000f81f (0x20) IX[B]
[20] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B]
[6] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B]
[7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[8] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[9] -1 0 0xfebf8000 - 0xfebfbfff (0x4000) MX[B](B)
[10] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[17] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[18] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[19] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[20] -1 0 0x0000d400 - 0x0000d43f (0x40) IX[B]
[21] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[B]
[22] -1 0 0x0000f800 - 0x0000f81f (0x20) IX[B]
[23] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) MGA(0): Chipset: "mgag200"
(II) Loading sub module "mga_hal"
(II) LoadModule: "mga_hal"
(WW) Warning, couldn't open module mga_hal
(II) UnloadModule: "mga_hal"
(EE) MGA: Failed to load module "mga_hal" (module does not exist, 0)
(==) MGA(0): Matrox HAL module not loaded - using builtin mode setup instead
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(**) MGA(0): Option "SWcursor" "True"
(**) MGA(0): Option "NoAccel" "0"
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xF6000000
(--) MGA(0): MMIO registers at 0xFEBF8000
(--) MGA(0): Pseudo-DMA transfer window at 0xFE000000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07540
(--) MGA(0): Found and verified enhanced Video BIOS info block
(II) MGA(0): MGABios.RamdacType = 0x0
(WW) System lacks support for changing MTRRs
(--) MGA(0): VideoRAM: 8192 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: (nil)
(II) MGA(0): end of I2C Monitor info
(--) MGA(0): No DDC signal
(II) MGA(0): DDC Monitor info: (nil)
(II) MGA(0): end of DDC Monitor info
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) MGA(0): initializing int10
(II) MGA(0): Primary V_BIOS segment is: 0xc000
(II) MGA(0): VESA BIOS detected
(II) MGA(0): VESA VBE Version 2.0
(II) MGA(0): VESA VBE Total Mem: 8192 kB
(II) MGA(0): VESA VBE OEM: Matrox Graphics Inc.
(II) MGA(0): VESA VBE OEM Software Rev: 1.6
(II) MGA(0): VESA VBE OEM Vendor: Matrox
(II) MGA(0): VESA VBE OEM Product: MGA-G200
(II) MGA(0): VESA VBE OEM Product Rev: 00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) MGA(0): VESA VBE DDC supported
(II) MGA(0): VESA VBE DDC Level none
(II) MGA(0): VESA VBE DDC transfer in appr. 0 sec.
(II) MGA(0): VESA VBE DDC read failed
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 250 MHz
(II) MGA(0): Monitor 1: Using hsync range of 30.00-54.00 kHz
(II) MGA(0): Monitor 1: Using vrefresh range of 50.00-70.00 Hz
(II) MGA(0): Clock range: 12.00 to 250.00 MHz
(II) MGA(0): Not using default mode "640x350" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x175" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x400" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x200" (vrefresh out of range)
(II) MGA(0): Not using default mode "720x400" (vrefresh out of range)
(II) MGA(0): Not using default mode "360x200" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "512x384" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "512x384" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "512x384" (hsync out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "512x384" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (hsync out of range)
(II) MGA(0): Not using default mode "576x432" (hsync out of range)
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (hsync out of range)
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "832x624" (vrefresh out of range)
(II) MGA(0): Not using default mode "416x312" (vrefresh out of range)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1024" (hsync out of range)
(II) MGA(0): Not using default mode "800x512" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "1152x768" (width too large for virtual size)
(--) MGA(0): Has SDRAM
(--) MGA(0): Virtual size is 1024x768 (pitch 1024)
(**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) MGA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MGA(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) MGA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MGA(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) MGA(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) MGA(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) MGA(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) MGA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) MGA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) MGA(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) MGA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) MGA(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) MGA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) MGA(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(==) MGA(0): DPI set to (75, 75)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B]
[1] 0 0 0xfebf8000 - 0xfebfbfff (0x4000) MX[B]
[2] 0 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B]
[9] -1 0 0xfecff000 - 0xfecfffff (0x1000) MX[B]
[10] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[11] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B)
[12] -1 0 0xfebf8000 - 0xfebfbfff (0x4000) MX[B](B)
[13] -1 0 0xf6000000 - 0xf6ffffff (0x1000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[20] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[21] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[22] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[23] -1 0 0x0000d400 - 0x0000d43f (0x40) IX[B]
[24] -1 0 0x0000f400 - 0x0000f43f (0x40) IX[B]
[25] -1 0 0x0000f800 - 0x0000f81f (0x20) IX[B]
[26] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 64 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): Using 3327 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
6 512x512 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(II) MGA(0): Using overlay video
(==) MGA(0): Direct rendering disabled
(==) RandR enabled
Symbol drmCtlUninstHandler from module /usr/X11R6/lib/modules/drivers/mga_drv.o is unresolved!
Symbol drmCtlInstHandler from module /usr/X11R6/lib/modules/drivers/mga_drv.o is unresolved!
Symbol drmGetInterruptFromBusID from module /usr/X11R6/lib/modules/drivers/mga_drv.o is unresolved!
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "imPS/2"
(**) Mouse1: Protocol: "imPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Server_Terminate keybinding not found
(II) Mouse1: ps2EnableDataReporting: succeeded######################################################################
# $Id: XF86Config-4.tpl,v 1.3 2004/03/10 02:40:54 diego Exp $
######################################################################
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# Load "record"
# Load "xtrap"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
# FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "no"
# Option "XkbVariant" "nodeadkeys"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "imPS/2"
Option "Device" "/dev/psaux"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Option "ZAxisMapping" "4 5"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor 1"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-54
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-70
# Custom modeline
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "Device 1"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "mga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
BusID "PCI:1:0:0"
# VideoRam 256
# Clocks 25.2 28.3
Option "NoAccel" "0"
Option "SWcursor" "True"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "Device 1"
Monitor "Monitor 1"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
