Hello,
since I baught a nec-lcd and use the dvi-output of my nvidia-card, i
don't get the tv-out of the nvidia-card to work anymore.
Before I had a dual-view-configuration (twinview didn't work). The
desktop was stretched over both screens.
I've got a haupauge pvr 350 with tv-out.
I tested the ivtv-fb-driver and the image is really beautiful and sharp,
so I'd like to get it working simultanously with my LCD.
The Problem:
X only starts on one screen (the LCD). The tv remains black and I can't
move the mouse in the tv-screen.
Both are working nice alone, but I'm not able to get it working together
the relevant part of my conf
#### NEC LCD ####
Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
DisplaySize 360 270
HorizSync 31.5-75 #91.1
Identifier "Monitor[0]"
ModelName "1600X1200@60HZ"
Option "DPMS"
#Option "ConnectedMonitor" "DFP"
VendorName "--> LCD"
VertRefresh 60 #50-85
UseModes "Modes[0]"
#Gamma 1.15 1.20 1.20 # created by KGamma
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622
Modeline "640x480" 23.86 640 656 720 800 480 481 484 497
Modeline "1600x1200" 160.96 1600 1704 1880 2160 1200 1201 1204
1242
Modeline "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054
1087
Modeline "1280x1024" 108.88 1280 1360 1496 1712 1024 1025 1028
1060
Modeline "1280x960" 102.10 1280 1360 1496 1712 960 961 964 994
Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895
Modeline "1024x768" 64.11 1024 1080 1184 1344 768 769 772 795
Modeline "1600x1024" 136.36 1600 1704 1872 2144 1024 1025 1028
1060
Modeline "1600x1000" 133.14 1600 1704 1872 2144 1000 1001 1004
1035
Modeline "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync
+vsync
EndSection
Section "Device"
BoardName "GeForce FX 5600"
BusID "3:0:0"
#Driver "nv"
Driver "nvidia"
Identifier "Device[0]"
Screen 0
Option "Rotate" "off"
Option "NoLogo" "1"
Option "NvAGP" "1"
Option "CursorShadow" "true"
Option "RenderAccel" "no"
VendorName "NVidia"
# Option "IgnoreDisplayDevices" "TV"
#### Nvidia Twinview Section ####
# Option "IgnoreEDID" "1"
# Option "Twinview"
# Option "TwinViewOrientation" "LeftOf"
# Option "ConnectedMonitor" "DFP"
# Option "SecondMonitorHorizSync" "30-50"
# Option "SecondMonitorVertRefresh" "50"
# Option "MetaModes" "1600x1200, 800x600; 1024x768, 1024x768; NULL,
800x600;"
# Option "TVStandard" "PAL-G"
# Option "TVOutFormat" "SVIDEO"
### VendorName "NVidia"
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050"
"1280x1024" "1280x960" "1152x864"
"1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864"
"1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050"
"1280x1024" "1280x960" "1152x864"
"1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1600x1024" "1600x1000" "1400x1050"
"1280x1024" "1280x960"
"1152x864"
"1024x768" "800x600" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
#### /NEC LCD ####
[...]
#### PVR350 TVOUT ####
Section "Monitor"
Identifier "Hauppauge PVR350 Monitor"
HorizSync 30-68
VertRefresh 50-120
Mode "720x576"
DotClock 42.6
HTimings 720 760 832 944
VTimings 576 577 580 602
Flags "-HSync" "-VSync"
EndMode
EndSection
Section "Device"
Identifier "Hauppauge PVR350"
Driver "fbdev"
Option "fbdev" "/dev/fb1"
# Screen 0
Screen 1
### change the busid to whatever is reported by lspci. Note
### output of lspci is hex, so add a preceding "0x" to the
###BusID
BusID "01:08:0"
EndSection
Section "Screen"
Identifier "Hauppauge PVR350 Screen"
Device "Hauppauge PVR350"
Monitor "Hauppauge PVR350 Monitor"
DefaultDepth 24
DefaultFbbpp 32
Subsection "Display"
Depth 24
FbBpp 32
Modes "720x480"
EndSubsection
EndSection
#### /PVR350 TVOUT ####
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
[...]
Option "Clone" "on"
Option "Xinerama" "off"
Screen 0 "Screen[0]"
# Screen 1 "Hauppauge PVR350 Screen"
Screen "Hauppauge PVR350 Screen" LeftOf "Screen[0]"
EndSection
Do anyone know whats wrong? The lcd works, the tv remains black.
Thanks in advance
greetings Andreas
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
