I have a problem starting my x server after I
installed
the nvidia drivers, when i run the same settings with
the standard
vesa drive everything works fine, my system specs are
below alog with my
XF86Config and XFree86.0.log files. The error I
receive is
at the end of the XFree86.0.log file
P3 450Mhz
256MB ram
Gigabyte GA-6VXE+ motherboard
Gigabyte GA-622C Nvidia Riva TNT2 M64 32Mb Screen card
Monitor 17 inch Mecer monitor
model: DE-770 BA
Horizontal 30-70Khz
Vertical 50-160kHz
Slackware Linux 9.1
XF86Config File:
----------------
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any
person obtaining a
# copy of this software and associated documentation
files (the "Software"),
# to deal in the Software without restriction,
including without limitation
# the rights to use, copy, modify, merge, publish,
distribute, sublicense,
# and/or sell copies of the Software, and to permit
persons to whom the
# Software is furnished to do so, subject to the
following conditions:
#
# The above copyright notice and this permission
notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the
XFree86 Project shall
# not be used in advertising or otherwise to promote
the sale, use or other
# dealings in this Software without prior written
authorization from the
# XFree86 Project.
#
#
**********************************************************************
# Refer to the XF86Config(4/5) man page for details
about the format of
# this file.
#
**********************************************************************
# NOTE: This is a NEW IMPROVED version of
XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver. Thanks to
Kenneth Fanyo who pointed
# this out to me. :)
# This XF86Config file is designed for use with the
VESA framebuffer.
# This generic interface should work with nearly all
video cards
# (although not every card will support every
resolution).
# With the new driver, it should no longer be required
to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@xxxxxxxxxxxxx
#
#
**********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
#
**********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and
disables
# initialisation of the XFree86-DGA extension within
that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't
initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
Load "freetype"
Load "speedo"
# This loads the GLX module
Load "glx"
EndSection
#
**********************************************************************
# Files section. This allows default font and rgb
paths to be set
#
**********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the
name of the
# file minus the extension (like ".txt" or ".db").
There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are
concatenated together),
# as well as specifying multiple comma-separated
entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and
emacs, Mosaic or other
# programs take long to start up, try moving the Type1
and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath
"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath
"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
# ModulePath can be used to set a search path for the
X server modules.
# The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
#
**********************************************************************
# Server flags section.
#
**********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot
where a signal is
# received. This may leave the console in an unusable
state, but may
# provide a better stack trace in the core dump to aid
in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT
switch sequence
# (where n is 1 through 12). This allows clients to
receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server
abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the
<Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key
events.
# Option "DontZoom"
# Uncomment this to disable tuning with the xvidtune
client. With
# it the client can still run and fetch card and
monitor attributes,
# but it will not be allowed to change them. If it
tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local
xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the
input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local
client to
# change the keyboard or mouse settings (currently
only xset).
# Option "AllowNonLocalModInDev"
# Set the basic blanking screen saver timeout.
# Option "blank time" "10" # 10 minutes
# Set the DPMS timeouts. These are set here because
they are global
# rather than screen-specific. These settings alone
don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even
then only when
# the driver supports it.
# Option "standby time" "20"
# Option "suspend time" "30"
# Option "off time" "60"
# On some platform the server needs to estimate the
sizes of PCI
# memory and pio ranges. This is done by assuming that
PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges
of inactive
# devices wrong. Here one can adjust how aggressive
the assumptions
# should be. Default is 0.
# Option "EstimateSizesAggresively" "0"
EndSection
#
**********************************************************************
# Input devices
#
**********************************************************************
#
**********************************************************************
# Core keyboard's InputDevice section
#
**********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it
defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not
Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Set the keyboard auto repeat parameters. Not all
platforms implement
# this.
# Option "AutoRepeat" "500 5"
# Specifiy which keyboard LEDs can be user-controlled
(eg, with xset(1)).
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment
XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard,
modify the
# lines below (which are the defaults). For example,
for a European
# keyboard, you will probably want to use one of:
#
# Option "XkbModel" "pc102"
# Option "XkbModel" "pc105"
#
# If you have a Microsoft Natural keyboard, you can
use:
#
# Option "XkbModel" "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
# Option "XkbModel" "pc104"
#
# Then to change the language, change the Layout
setting.
# For example, a german layout can be obtained with:
#
# Option "XkbLayout" "de"
#
# or:
#
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your
capslock and
# control keys, use:
#
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
#
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
EndSection
#
**********************************************************************
# Core Pointer's InputDevice section
#
**********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
# On platforms where PnP mouse detection is supported
the following
# protocol setting can be used when using a newer PnP
mouse:
# Option "Protocol" "Auto"
# The available mouse protocols types that you can set
below are:
# Auto BusMouse GlidePoint GlidePointPS/2
IntelliMouse IMPS/2
# Logitech Microsoft MMHitTab MMSeries Mouseman
MouseManPlusPS/2
# MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse
PS/2 SysMouse
# ThinkingMouse ThinkingMousePS/2 Xqueue
Option "Protocol" "PS/2"
# The mouse device. The device is normally set to
/dev/mouse,
# which is usually a symbolic link to the real device.
Option "Device" "/dev/mouse"
# Option "Device" "/dev/psaux"
# Option "Device" "/dev/ttyS0"
# Option "Device" "/dev/ttyS1"
# When using XQUEUE, comment out the above two lines,
and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech
mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft
mice
# Emulate3Timeout is the timeout in milliseconds
(default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech
mice
# Option "ChordMiddle"
EndSection
# Some examples of extended input devices
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
**********************************************************************
# Monitor section
#
**********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete
values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO
YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30 - 70
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync
frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync
frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of
discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO
YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
EndSection
#
**********************************************************************
# Graphics device section
#
**********************************************************************
# Any number of graphics device sections may be
present
Section "Device"
Identifier "TNT2"
Driver "nvidia"
BusId "PCI:1:0:0"
#VideoRam 4096
# Insert Clocks lines here if appropriate
EndSection
#
**********************************************************************
# Screen sections
#
**********************************************************************
# Any number of screen sections may be present. Each
describes
# the configuration of a single screen. A single
specific screen section
# may be specified from the X server command line with
the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "TNT2"
Monitor "My Monitor"
# If your card can handle it, a higher default color
depth (like 24 or 32)
# is highly recommended.
# DefaultDepth 8
DefaultDepth 16
# DefaultDepth 24
# DefaultDepth 32
# "1024x768" is also a conservative usable default
resolution. If you
# have a better monitor, feel free to try resolutions
such as
# "1152x864", "1280x1024", "1600x1200", and
"1800x1400" (or whatever your
# card/monitor can produce)
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
#
**********************************************************************
# ServerLayout sections.
#
**********************************************************************
# Any number of ServerLayout sections may be present.
Each describes
# the way multiple screens are organised. A specific
ServerLayout
# section may be specified from the X server command
line with the
# "-layout" option. In the absence of this, the first
section is used.
# When now ServerLayout section is present, the first
Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name,
and optionally
# the relative position of other screens. The four
names after
# primary screen name are the screens to the top,
bottom, left and right
# of the primary screen. In this example, screen 2 is
located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice
section name and
# optionally some options to specify the way the
device is to be
# used. Those options include "CorePointer",
"CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
XFree86.0.log file:
-------------------
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.22 i686 [ELF]
Build Date: 16 September 2003
Before reporting problems, check
http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==)
default setting,
(++) from command line, (!!) notice, (II)
informational,
(WW) warning, (EE) error, (NI) not
implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Apr
29 16:03:19 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "TNT2"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000002c,
mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 0000,0000 rev
42 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev
00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0596 card 1106,0000 rev
12 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev
06 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev
08 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3050 card 0000,0000 rev
20 class 06,00,00 hdr 00
(II) PCI: 00:0a:0: chip 13f6,0111 card 13f6,0111 rev
10 class 04,01,00 hdr 00
(II) PCI: 00:0b:0: chip 1317,0985 card 1113,1216 rev
11 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 10de,002d card 0000,0000 rev
15 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL:
0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL:
0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdc000000 - 0xddffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xde000000 - 0xdfffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL:
0x0008 (VGA_EN is set)
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:7:3), (-1,-1,1), BCTRL:
0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) nVidia Corporation NV5M64 [RIVA TNT2
Model 64/Model 64 Pro] rev 21, Mem @ 0xdc000000/24,
0xde000000/25
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd8000000
from 0xdbffffff to 0xd7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe1000000 - 0xe10003ff (0x400) MX[B]
[1] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O
[2] -1 0 0xde000000 - 0xdfffffff (0x2000000) MX[B](B)
[3] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B)
[4] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[5] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[6] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) Active PCI resource ranges after removing
overlaps:
[0] -1 0 0xe1000000 - 0xe10003ff (0x400) MX[B]
[1] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O
[2] -1 0 0xde000000 - 0xdfffffff (0x2000000) MX[B](B)
[3] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B)
[4] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[5] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[6] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) OS-reported resource ranges after removing
overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe1000000 - 0xe10003ff (0x400) MX[B]
[6] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O
[7] -1 0 0xde000000 - 0xdfffffff (0x2000000) MX[B](B)
[8] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[12] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[13] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[14] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading
/usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading
/usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading
/usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "glx"
(II) Loading
/usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.5336
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading
/usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.5336
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) NVIDIA XFree86 Driver 1.0-5336 Wed Jan 14
18:30:46 PST 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources()
call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe1000000 - 0xe10003ff (0x400) MX[B]
[6] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O
[7] -1 0 0xde000000 - 0xdfffffff (0x2000000) MX[B](B)
[8] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[12] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[13] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[14] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe1000000 - 0xe10003ff (0x400) MX[B]
[6] -1 0 0xd8000000 - 0xd7ffffff (0x0) MX[B]O
[7] -1 0 0xde000000 - 0xdfffffff (0x2000000) MX[B](B)
[8] -1 0 0xdc000000 - 0xdcffffff (0x1000000) MX[B](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[15] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[16] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[17] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[18] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[19] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xDE000000
(--) NVIDIA(0): MMIO registers at 0xDC000000
(II) NVIDIA(0): NVIDIA GPU detected as: RIVA TNT2
Model 64/Model 64 Pro
(--) NVIDIA(0): VideoBIOS: 02.05.13.03.00
(--) NVIDIA(0): VideoRAM: 32768 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0
(--) NVIDIA(0): Display device CRT-0: maximum pixel
clock at 8 bpp: 250 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel
clock at 16 bpp: 250 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel
clock at 32 bpp: 215 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(WW) NVIDIA(0): The user specified VertRefresh
"50.000-160.000" has been
(WW) NVIDIA(0): adjusted to "" (the intersection
with EDID-specified
(WW) NVIDIA(0): VertRefresh "50.000-10.000"
(EE) NVIDIA(0): no VertRefresh values remaining
(II) NVIDIA(0): My Monitor: Using hsync range of
30.00-70.00 kHz
(WW) NVIDIA(0): My Monitor: using default vrefresh
range of 50.00-10.00Hz
(II) NVIDIA(0): Clock range: 12.00 to 250.00 MHz
(II) NVIDIA(0): Not using default mode "640x350"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x175"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x400"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x200"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "720x400"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "360x200"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1152x864"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "576x432"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1280x960"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1280x960"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x512"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1280x1024"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344"
(bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "896x672"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392"
(bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "928x696"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440"
(bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "832x624"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "416x312"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1152x768"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "576x384"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1400x1050"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "700x525"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1400x1050"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1024"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x512"
(vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1920x1440"
(bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536"
(bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536"
(bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768"
(hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536"
(bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768"
(hsync out of range)
(WW) NVIDIA(0): Mode pool is empty
(EE) NVIDIA(0): No modes remaining for display device
CRT-0
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "ddc"
(II) Unloading /usr/X11R6/lib/modules/libddc.a
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable
configuration.
Fatal server error:
no screens found
When reporting a problem related to a server crash,
please send
the full server output, not just the last messages.
This can be found in the log file
"/var/log/XFree86.0.log".
Please report problems to xfree86@xxxxxxxxxxxx
__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
http://hotjobs.sweepstakes.yahoo.com/careermakeover
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
