David, where did you get the modeline from? if I use http://xtiming.sourceforge.net/cgi-bin/xtiming.pl I get Modeline "640x480@60" 24.11 640 672 760 792 480 490 495 505 AFAIK , XFree is setting the FPClk by itself, but on the other hand, it seems like I can't really help you Veikko > -----Original Message----- > From: David L [mailto:idht4n@xxxxxxxxxxx] > Sent: Friday, April 02, 2004 5:30 PM > To: xfree86@xxxxxxxxxxx > Subject: RE: lcd bottom of screen at top & top at bottom > > > >From: "Veikko Werner" <veikko.werner@xxxxxxxxxx> > >Reply-To: xfree86@xxxxxxxxxxx > >To: <xfree86@xxxxxxxxxxx> > >Subject: RE: lcd bottom of screen at top & top at bottom > >Date: Thu, 1 Apr 2004 08:24:03 +0200 > > > >David, > > > >this seems to tell that XFree86 isn't starting the C&T > driver but the VESA > >driver - I suppose. > >Could you send the two log's (the one working and the previously not > >working one) ? > > Veikko, > > Thanks for looking into this. Here is the working one: > > _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 > _XSERVTransOpen: transport open failed for inet6/thishost:0 > _XSERVTransMakeAllCOTSServerListeners: failed to open > listener for inet6 > > XFree86 Version 4.4.0 > Release Date: 29 February 2004 > X Protocol Version 11, Revision 0, Release 6.6 > Build Operating System: Linux 2.2.14-VA.2.1 i686 [ELF] > Current Operating System: Linux thishost 2.6.4 #13 Tue Mar 30 > 08:57:23 PST > 2004 i586 > Build Date: 27 February 2004 > Changelog Date: 29 February 2004 > Before reporting problems, check http://www.XFree86.Org/ > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Fri Jan 29 > 16:04:43 1999 > (==) Using config file: "/etc/X11/XF86Config" > (==) ServerLayout "Simple Layout" > (**) |-->Screen "Screen 1" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "graphics0" > (**) |-->Input Device "touchscreen1" > (**) |-->Input Device "Keyboard1" > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc101" > (**) XKB: model: "pc101" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (==) |-->Input Device "<default pointer>" > (WW) The core pointer device wasn't specified explicitly in > the layout. > Using the default mouse configuration. > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc > /,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/ > fonts/75dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (**) Option "AllowNonLocalXvidtune" > (WW) Open APM failed (/dev/apm_bios) (No such file or directory) > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.2 > XFree86 Video Driver: 0.7 > XFree86 XInput driver : 0.4 > XFree86 Server Extension : 0.2 > XFree86 Font Renderer : 0.4 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.7 > (--) using VT number 2 > > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x80005858, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 10b9,1531 card 10b9,1531 rev b3 class > 06,00,00 hdr > 00 > (II) PCI: 00:01:0: chip 102c,00c0 card 102c,00c0 rev 64 class > 03,00,00 hdr > 00 > (II) PCI: 00:02:0: chip 10b9,1533 card 0000,0000 rev c3 class > 06,01,00 hdr > 00 > (II) PCI: 00:03:0: chip 8086,1209 card 0000,0000 rev 09 class > 02,00,00 hdr > 00 > (II) PCI: 00:0b:0: chip 10b9,5229 card 0000,0000 rev c1 class > 01,01,a4 hdr > 00 > (II) PCI: End of PCI scan > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 > (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) PCI-to-ISA bridge: > (II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 > (VGA_EN is set) > (--) PCI:*(0:1:0) Chips and Technologies F69000 HiQVideo rev > 100, Mem @ > 0xfd000000/24 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] > [1] -1 0 0xfc020000 - 0xfc020fff (0x1000) MX[B] > [2] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) > [3] -1 0 0x00001400 - 0x0000140f (0x10) IX[B] > [4] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] > [5] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] > [6] -1 0 0x00001000 - 0x0000103f (0x40) IX[B] > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] > [1] -1 0 0xfc020000 - 0xfc020fff (0x1000) MX[B] > [2] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) > [3] -1 0 0x00001400 - 0x0000140f (0x10) IX[B] > [4] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] > [5] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] > [6] -1 0 0x00001000 - 0x0000103f (0x40) IX[B] > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] > [6] -1 0 0xfc020000 - 0xfc020fff (0x1000) MX[B] > [7] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) > [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [10] -1 0 0x00001400 - 0x0000140f (0x10) IX[B] > [11] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] > [12] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] > [13] -1 0 0x00001000 - 0x0000103f (0x40) IX[B] > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.2 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Speedo > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project & the After > X-TT Project" > compiled for 4.4.0, module version = 2.1.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font FreeType > (II) LoadModule: "chips" > (II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o > (II) Module chips: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.7 > (II) LoadModule: "elographics" > (II) Loading /usr/X11R6/lib/modules/input/elographics_drv.o > (II) Module elographics: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.4 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.4 > (II) CHIPS: Driver for Chips and Technologies chipsets: > ct65520, ct65525, > ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, > ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300 > (II) Primary Device is: PCI 00:01:0 > (--) Assigning device section with no busID to primary device > (--) Chipset ct69000 found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] > [6] -1 0 0xfc020000 - 0xfc020fff (0x1000) MX[B] > [7] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) > [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [10] -1 0 0x00001400 - 0x0000140f (0x10) IX[B] > [11] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] > [12] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] > [13] -1 0 0x00001000 - 0x0000103f (0x40) IX[B] > (II) resource ranges after probing: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] > [6] -1 0 0xfc020000 - 0xfc020fff (0x1000) MX[B] > [7] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) > [8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [13] -1 0 0x00001400 - 0x0000140f (0x10) IX[B] > [14] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] > [15] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] > [16] -1 0 0x00001000 - 0x0000103f (0x40) IX[B] > [17] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [18] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.7 > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.1.0 > ABI class: XFree86 Video Driver, version 0.7 > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.7 > (II) CHIPS(0): initializing int10 > (II) CHIPS(0): Primary V_BIOS segment is: 0xc000 > (WW) System lacks support for changing MTRRs > (II) CHIPS(0): VESA BIOS detected > (II) CHIPS(0): VESA VBE Version 2.0 > (II) CHIPS(0): VESA VBE Total Mem: 2048 kB > (II) CHIPS(0): VESA VBE OEM: CHIPS 69000 Super VGA > (II) CHIPS(0): VESA VBE OEM Software Rev: 1.0 > (II) CHIPS(0): VESA VBE OEM Vendor: Chips & Technologies, Inc. > (II) CHIPS(0): VESA VBE OEM Product: 69000 Display Controller > (II) CHIPS(0): VESA VBE OEM Product Rev: 2 > (**) CHIPS(0): Depth 16, (--) framebuffer bpp 16 > (II) CHIPS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, > hwp->PIOOffset is > 0x0000 > (==) CHIPS(0): RGB weight 565 > (==) CHIPS(0): Default visual is TrueColor > (==) CHIPS(0): Using gamma correction (1.0, 1.0, 1.0) > (**) CHIPS(0): Option "UseModeline" > (**) CHIPS(0): Option "NoStretch" > (**) CHIPS(0): Option "SuspendHack" > (==) CHIPS(0): Using HW cursor > (**) CHIPS(0): Enabling linear addressing > (--) CHIPS(0): base address is set at 0xFD000000. > (**) CHIPS(0): Using MMIO > (--) CHIPS(0): VideoRAM: 2048 kByte > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.7 > (II) CHIPS(0): VESA VBE DDC supported > (II) CHIPS(0): VESA VBE DDC Level 2 > (II) CHIPS(0): VESA VBE DDC transfer in appr. 1 sec. > (II) CHIPS(0): VESA VBE DDC read failed > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Loading /usr/X11R6/lib/modules/libi2c.a > (II) Module i2c: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.2.0 > ABI class: XFree86 Video Driver, version 0.7 > (II) CHIPS(0): I2C bus "DDC" initialized. > (II) CHIPS(0): Probing for DDC1 > (--) CHIPS(0): TFT probed > (--) CHIPS(0): CRT > (--) CHIPS(0): Color monitor detected > (--) CHIPS(0): PCI Bus > (--) CHIPS(0): Using programmable clocks > (--) CHIPS(0): Dot clock 0: 25.255 MHz > (--) CHIPS(0): Dot clock 1: 28.310 MHz > (--) CHIPS(0): Dot clock 2: 25.255 MHz FPclk CRTclk > (--) CHIPS(0): Probed memory clock of 83.045 MHz > (==) CHIPS(0): Min pixel clock is 11.000 MHz > (--) CHIPS(0): Max pixel clock is 135.000 MHz > (II) CHIPS(0): Monitor0: Using hsync range of 15.00-36.00 kHz > (II) CHIPS(0): Monitor0: Using vrefresh range of 48.00-67.00 Hz > (II) CHIPS(0): Clock range: 11.00 to 135.00 MHz > (II) CHIPS(0): Not using default mode "640x350" (hsync out of range) > (II) CHIPS(0): Not using default mode "320x175" (hsync out of range) > (II) CHIPS(0): Not using default mode "640x400" (hsync out of range) > (II) CHIPS(0): Not using default mode "320x200" (hsync out of range) > (II) CHIPS(0): Not using default mode "720x400" (hsync out of range) > (II) CHIPS(0): Not using default mode "360x200" (hsync out of range) > (II) CHIPS(0): Not using default mode "320x240" (hsync out of range) > (II) CHIPS(0): Not using default mode "320x240" (hsync out of range) > (II) CHIPS(0): Not using default mode "320x240" (hsync out of range) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "400x300" (hsync out of range) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "400x300" (hsync out of range) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "400x300" (hsync out of range) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "400x300" (hsync out of range) > (II) CHIPS(0): Not using default mode "1024x768" (vrefresh > out of range) > (II) CHIPS(0): Not using default mode "512x384" (vrefresh out > of range) > (II) CHIPS(0): Not using default mode "1024x768" (hsync out of range) > (II) CHIPS(0): Not using default mode "512x384" (hsync out of range) > (II) CHIPS(0): Not using default mode "1024x768" (hsync out of range) > (II) CHIPS(0): Not using default mode "512x384" (hsync out of range) > (II) CHIPS(0): Not using default mode "1024x768" (hsync out of range) > (II) CHIPS(0): Not using default mode "512x384" (hsync out of range) > (II) CHIPS(0): Not using default mode "1024x768" (hsync out of range) > (II) CHIPS(0): Not using default mode "512x384" (hsync out of range) > (II) CHIPS(0): Not using default mode "1152x864" (hsync out of range) > (II) CHIPS(0): Not using default mode "576x432" (hsync out of range) > (II) CHIPS(0): Not using default mode "1280x960" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1280x960" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1280x1024" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "640x512" (hsync out of range) > (II) CHIPS(0): Not using default mode "1280x1024" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "640x512" (hsync out of range) > (II) CHIPS(0): Not using default mode "1280x1024" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "640x512" (hsync out of range) > (II) CHIPS(0): Not using default mode "1600x1200" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "1600x1200" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "1600x1200" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "1600x1200" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "1600x1200" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "800x600" (hsync out of range) > (II) CHIPS(0): Not using default mode "1792x1344" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "896x672" (hsync out of range) > (II) CHIPS(0): Not using default mode "1792x1344" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "896x672" (hsync out of range) > (II) CHIPS(0): Not using default mode "1856x1392" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "928x696" (hsync out of range) > (II) CHIPS(0): Not using default mode "1856x1392" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "928x696" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "1920x1440" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "960x720" (hsync out of range) > (II) CHIPS(0): Not using default mode "1920x1440" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "832x624" (hsync out of range) > (II) CHIPS(0): Not using default mode "416x312" (hsync out of range) > (II) CHIPS(0): Not using default mode "1152x768" (hsync out of range) > (II) CHIPS(0): Not using default mode "576x384" (hsync out of range) > (II) CHIPS(0): Not using default mode "1400x1050" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "700x525" (hsync out of range) > (II) CHIPS(0): Not using default mode "1400x1050" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "700x525" (hsync out of range) > (II) CHIPS(0): Not using default mode "1600x1024" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "800x512" (hsync out of range) > (II) CHIPS(0): Not using default mode "1920x1440" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "2048x1536" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1024x768" (hsync out of range) > (II) CHIPS(0): Not using default mode "2048x1536" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "2048x1536" > (insufficient memory for > mode) > (II) CHIPS(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) CHIPS(0): Not using default mode "800x600" (width too > large for virtual > size) > (--) CHIPS(0): Virtual size is 640x480 (pitch 640) > (**) CHIPS(0): *Mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz > (II) CHIPS(0): Modeline "640x480" 25.20 640 676 772 800 > 480 490 492 525 > -hsync -vsync > (**) CHIPS(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, > 56.3 Hz (D) > (II) CHIPS(0): Modeline "400x300" 18.00 400 412 448 512 > 300 300 301 312 > doublescan +hsync +vsync > (**) CHIPS(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, > 60.1 Hz (D) > (II) CHIPS(0): Modeline "320x240" 12.60 320 328 376 400 > 240 245 246 262 > doublescan -hsync -vsync > (**) CHIPS(0): Display dimensions: (264, 198) mm > (**) CHIPS(0): DPI set to (61, 61) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.2 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.1.0 > ABI class: XFree86 Video Driver, version 0.7 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.7 > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MS[B] > [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [6] -1 0 0xfc000000 - 0xfc01ffff (0x20000) MX[B] > [7] -1 0 0xfc020000 - 0xfc020fff (0x1000) MX[B] > [8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) > [9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [14] -1 0 0x00001400 - 0x0000140f (0x10) IX[B] > [15] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] > [16] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] > [17] -1 0 0x00001000 - 0x0000103f (0x40) IX[B] > [18] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [19] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (--) CHIPS(0): 1482752 bytes off-screen memory available > (II) CHIPS(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > 8x8 color pattern filled rectangles > CPU to Screen color expansion > Screen to Screen color expansion > Solid Horizontal and Vertical Lines > Offscreen Pixmaps > Driver provided WritePixmap replacement > Setting up tile and stipple cache: > 23 128x128 slots > 5 256x256 slots > 25 8x8 color pattern slots > 32 8x8 color expansion slots > (==) CHIPS(0): Backing store disabled > (==) RandR enabled > (II) Setting vga for screen 0. > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (**) Option "SendCoreEvents" > (**) TOUCHSCREEN: always reports core events > (**) Elographics X device name: TOUCHSCREEN > (**) Elographics associated screen: 0 > (**) Elographics untouch delay: 50 ms > (**) Elographics report delay: 10 ms > (**) Option "MaxX" "3591" > (**) Elographics maximum x position: 3591 > (**) Option "MinX" "442" > (**) Elographics minimum x position: 442 > (**) Option "MaxY" "3434" > (**) Elographics maximum y position: 3434 > (**) Option "MinY" "641" > (**) Elographics minimum y position: 641 > (**) Elographics device will work in Landscape mode > (II) Keyboard "Keyboard1" handled by legacy driver > (WW) <default pointer>: No Device specified, looking for one... > (II) <default pointer>: Setting Device option to "/dev/psaux" > (--) <default pointer>: Device: "/dev/psaux" > (==) <default pointer>: Protocol: "Auto" > (**) Option "CorePointer" > (**) <default pointer>: Core Pointer > (**) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50 > (==) <default pointer>: Buttons: 3 > (II) XINPUT: Adding extended input device "<default pointer>" > (type: MOUSE) > (II) XINPUT: Adding extended input device "TOUCHSCREEN" > (type: Elographics > TouchScreen) > (**) Option "Device" "/dev/ttyS1" > (**) Option "BaudRate" "9600" > (**) Option "StopBits" "1" > (**) Option "DataBits" "8" > (**) Option "Parity" "None" > (**) Option "Vmin" "10" > (**) Option "Vtime" "1" > (**) Option "FlowControl" "None" > (--) Elographics touchscreen is a AccuTouch, connected > through a serial > link. > (--) The controller is a model E271-2210, firmware revision 1.4. > (II) <default pointer>: GuessProtocol: setting mouse protocol > to "PS/2" > (II) <default pointer>: ps2EnableDataReporting: succeeded > Could not init font path element > /usr/X11R6/lib/X11/fonts/local/, removing > from list! > > The not working one is the same except for these differences: > diff XFree86.0.log.good XFree86.0.log.bad > 18c18 > < (==) Log file: "/var/log/XFree86.0.log", Time: Fri Jan 29 > 16:04:43 1999 > --- > >(==) Log file: "/var/log/XFree86.0.log", Time: Fri Jan 29 > 16:11:46 1999 > 310,311c310,311 > < (--) CHIPS(0): Dot clock 1: 28.310 MHz > < (--) CHIPS(0): Dot clock 2: 25.255 MHz FPclk CRTclk > --- > >(--) CHIPS(0): Dot clock 1: 28.310 MHz CRTclk > >(--) CHIPS(0): Dot clock 2: 25.172 MHz FPclk > > Thanks: > > David > > PS - On a different topic, what's with the inet6 warning > messages at the > top? > > Also, is there a way to speed up X startup time... it looks > like X is trying > a lot > of stuff every time it starts. Can I change some > configurations to tell it > to > remember the settings from last time? Xfree86 seems to be > taking ~8 seconds > to start up on my system while XMetro took about 5. > > > > >Veikko > > > > > -----Original Message----- > > > From: David L [mailto:idht4n@xxxxxxxxxxx] > > > Sent: Wednesday, March 31, 2004 7:57 PM > > > To: xfree86@xxxxxxxxxxx > > > Subject: RE: lcd bottom of screen at top & top at bottom > > > > > > > > > >I'm tyring to run XFree86 Version 4.4.0 on a Jumtek > MOPSLCD6 PC-104 > > > >(CT69000 chipset detected) computer with a 640x480 VGA LCD. > > > The top of the > > > >screen shows what should be on the bottom of the screen, > > > then there is a > > > >black horizontal band about an inch tall, and below that is > > > what should be > > > >the top of the screen. The same hardware works fine with > > > Metro-X Enhanced > > > >Server Set version 4.3.4-1, but I'd like to use xfree86. I > > > attempted to > > > >set up XF86config the same as the XMetroconfig that is > > > working, but with no > > > >luck. What can I try to get rid of the vertical wrapping > > > that I'm seeing? > > > > > > Problem solved (or at least worked around)! If I boot with > > > the vga=785 > > > linux loader option, not only do I get a nice penguin on > > > boot, but X also > > > looks the way it's supposed to. I had previously verified > > > that the penguin > > > looked right and that Metro X worked right with or without > > > the vga option, > > > but I hadn't tried using the vga option and then running > > > Xfree86 X. For > > > some reason, Metro doesn't need the vga option but > Xfree86 does. Is > > > this a XFree86 bug?? Should I file a bug report? > > > > > > Thanks: > > > > > > David > > > > > _________________________________________________________________ > MSN Toolbar provides one-click access to Hotmail from any Web > page - FREE > download! http://toolbar.msn.com/go/onm00200413ave/direct/01/ > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 > _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
