Re: DRI compilation errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



You need to check out the Mesa module from /cvs/mesa and the xc module
from /cvs/dri.  Then, point the path in host.def under the DRI tree to
the Mesa directory that you checked out.

On Sat, Jan 24, 2004 at 05:11:56PM -0600, Patrick Dohman wrote:
> I have confirmed that the mesa libs are included in the dri cvs source
> tree. Any other suggestions?
> 
> Thanks
> 
> 
> On Sat, 2004-01-24 at 15:47, LeVA wrote:
> > 2004. január 24. 22:21 dátummal Patrick Dohman ezt írta:
> > > Hello
> > >
> > > I am having difficulties compiling the DRI tree on my redhat 8.0
> > > system running kernel 2.4.20-28 and XFree86 Red Hat Linux release
> > > 4.2.1-23. I have been able to configure my video chip "845gl" for a
> > > decent resolution, however I do not have hardware acceleration so I
> > > figured I would give compiling and installing the dri a shot. I
> > > downloaded the dri cvs source and configured my kernel as per the dri
> > > compilation guide. The dri kernel module for my system "i810" fails
> > > to build and I receive the following errors in the world log.
> > >
> > > make[3]: Entering directory `/dev/dri-cvs/build/xc/include/GL'
> > > make[3]: *** No rule to make target
> > > `/X11R6/SourceForge/Mesanew/Mesa-newtree/include/GL/gl.h', needed by
> > > `gl.h'. Stop.
> > 
> > This means, that you didn't read the readme nor the faqs... As you can 
> > see there isn't any /X11R6/SourceForge/Mesanew.... dirs on your system. 
> > You need to get the mesalibs (source) in order to compile this dri-cvs,
> > and specify the mesalib source's dir to the dri-cvs makefile.
> > 
> > > make[3]: Leaving directory `/dev/dri-cvs/build/xc/include/GL'
> > > make[2]: *** [includes] Error 2
> > > make[2]: Leaving directory `/dev/dri-cvs/build/xc/include'
> > > make[1]: *** [includes] Error 2
> > > make[1]: Leaving directory `/dev/dri-cvs/build/xc'
> > > make: *** [World] Error 2
> > >
> > > I hope this is the correct forum to post this question. If there is a
> > > more elegant solution to my issue I would be more than happy to hear
> > > about it.
> > >
> > >
> > > _______________________________________________
> > > XFree86 mailing list
> > > XFree86@xxxxxxxxxxx
> > > http://XFree86.Org/mailman/listinfo/xfree86
> > 
> > -- 
> > LeVA
> > 
> > _______________________________________________
> > XFree86 mailing list
> > XFree86@xxxxxxxxxxx
> > http://XFree86.Org/mailman/listinfo/xfree86
> 
> 
> 
> _______________________________________________
> XFree86 mailing list
> XFree86@xxxxxxxxxxx
> http://XFree86.Org/mailman/listinfo/xfree86
> 

-- 
Ryan Underwood, <nemesis@xxxxxxxxxxxx>

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux