Hello I am having difficulties compiling the DRI tree on my redhat 8.0 system running kernel 2.4.20-28 and XFree86 Red Hat Linux release 4.2.1-23. I have been able to configure my video chip "845gl" for a decent resolution, however I do not have hardware acceleration so I figured I would give compiling and installing the dri a shot. I downloaded the dri cvs source and configured my kernel as per the dri compilation guide. The dri kernel module for my system "i810" fails to build and I receive the following errors in the world log. make[3]: Entering directory `/dev/dri-cvs/build/xc/include/GL' make[3]: *** No rule to make target `/X11R6/SourceForge/Mesanew/Mesa-newtree/include/GL/gl.h', needed by `gl.h'. Stop. make[3]: Leaving directory `/dev/dri-cvs/build/xc/include/GL' make[2]: *** [includes] Error 2 make[2]: Leaving directory `/dev/dri-cvs/build/xc/include' make[1]: *** [includes] Error 2 make[1]: Leaving directory `/dev/dri-cvs/build/xc' make: *** [World] Error 2 I hope this is the correct forum to post this question. If there is a more elegant solution to my issue I would be more than happy to hear about it. _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
