2004. január 24. 22:21 dátummal Patrick Dohman ezt írta: > Hello > > I am having difficulties compiling the DRI tree on my redhat 8.0 > system running kernel 2.4.20-28 and XFree86 Red Hat Linux release > 4.2.1-23. I have been able to configure my video chip "845gl" for a > decent resolution, however I do not have hardware acceleration so I > figured I would give compiling and installing the dri a shot. I > downloaded the dri cvs source and configured my kernel as per the dri > compilation guide. The dri kernel module for my system "i810" fails > to build and I receive the following errors in the world log. > > make[3]: Entering directory `/dev/dri-cvs/build/xc/include/GL' > make[3]: *** No rule to make target > `/X11R6/SourceForge/Mesanew/Mesa-newtree/include/GL/gl.h', needed by > `gl.h'. Stop. This means, that you didn't read the readme nor the faqs... As you can see there isn't any /X11R6/SourceForge/Mesanew.... dirs on your system. You need to get the mesalibs (source) in order to compile this dri-cvs, and specify the mesalib source's dir to the dri-cvs makefile. > make[3]: Leaving directory `/dev/dri-cvs/build/xc/include/GL' > make[2]: *** [includes] Error 2 > make[2]: Leaving directory `/dev/dri-cvs/build/xc/include' > make[1]: *** [includes] Error 2 > make[1]: Leaving directory `/dev/dri-cvs/build/xc' > make: *** [World] Error 2 > > I hope this is the correct forum to post this question. If there is a > more elegant solution to my issue I would be more than happy to hear > about it. > > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 -- LeVA _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
