Hi all, I posted a message a while ago about modelines for X in order to use it with an arcade monitor running at 258Khz Horizontal Frequency. I made a cable to connect the monitor to a PC and did some test, but the voltage output of the vga card is not high enough for the arcade monitor. So, I tried to test some modelines on my NEC Multisync monitor, and after a while I could get something displayed without frequency problem. I made my tests using knoppix. Here's my modeline : Modeline "512x384" 15.38 512 544 600 632 384 392 396 404 -HSync +VSync I don't know what to change in my modeline in order to display properly Here's some pics displaying the kde desktop, and you can see the display problem. http://www.amigrave.com/25khz/25Khz_on_Nec_01.jpg http://www.amigrave.com/25khz/25Khz_on_Nec_02.jpg http://www.amigrave.com/25khz/25Khz_on_Nec_03.jpg http://www.amigrave.com/25khz/25Khz_on_Nec_04.jpg _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
