Hello all, i recently developed a problem with the i810 driver. Got a 855GM chip on a toshiba laptop and it worked fine with 3d acceleration until yesterday.Did run glxgears (well - tried anyway) and the server crashed and didn't come up after reboot or with a different kernel.Did use kernel 2.6-beta10 at the time and also tried with 2.4.22 ck-patched kernel. It will only work with the vesa driver now - reinstalling xfree didn't help anything.I do suspect a hardware failure but are not sure of this. The problem as per output of the xfree log seems to be this: (WW) I810(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled (WW) I810(0): PRB0_HEAD (0x00000000) and PRB0_TAIL (0x000008c9) indicate ring buffer not flushed snip ADVANCE_LP_RING: outring (0x169) isn't on a QWord boundary(==) RandR enabled snip ADVANCE_LP_RING: outring (0x191) isn't on a QWord boundaryADVANCE_LP_RING: outring (0x1b9) isn't on a QWord boundaryADVANCE_LP_RING: outring (0x1d1) isn't on a QWord boundaryADVANCE_LP_RING: outring (0x1e9) isn't on a QWord boundaryADVANCE_LP_RING: outring (0x201) isn't on a QWord boundaryADVANCE_LP_RING: outring (0x219) isn't on a QWord (repeated with different values a couple of times) boundaryADVANCE_LP_RING: outring (0x801) isn't on a QWord boundaryError in I830WaitLpRing(), now is 9483, start is 7482 pgetbl_ctl: 0xffe0001 pgetbl_err: 0x0 ipeir: 0 iphdr: 300 LP ring tail: 8c1 head: 0 len: 1f001 start 7fde000 eir: 0 esr: 1 emr: ffff instdone: ffc1 instpm: 54 memmode: 108 instps: 20 hwstam: ffff ier: 0 imr: ffff iir: 0 space: 128824 wanted 131064 (II) I810(0): [drm] removed 1 reserved context for kernel (II) I810(0): [drm] unmapping 8192 bytes of SAREA 0xd0eac000 at 0x40015000 Fatal server error: lockup snip Error in I830WaitLpRing(), now is 14504, start is 12503 pgetbl_ctl: 0xffe0001 pgetbl_err: 0x0 ipeir: 0 iphdr: 300 LP ring tail: 8c9 head: 0 len: 1f001 start 7fde000 eir: 0 esr: 1 emr: ffff instdone: ffc1 instpm: 54 memmode: 108 instps: 20 hwstam: ffff ier: 0 imr: ffff iir: 0 space: 128816 wanted 131064 FatalError re-entered, aborting lockup Can anybody make sense out of this? I'd like to check if it would work with M$ but all i got is a recovery DVD and that will wipe the whole drive. Klaus _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
