Thanks, I have an ADI Microscan M900 so it looks like I have picked the wrong monitor. Does anyone have the correct config for an M900 - it's not listed in the X monitor list. thanks again. Jeff On Thu, 2003-12-04 at 06:00, Mark Vojkovich wrote: > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName "ADI MicroScan 17X+" > HorizSync 24.6 - 60.0 > VertRefresh 50.0 - 120.0 > Option "dpms" > EndSection > > If those specs are correct, that monitor cannot do 1600x1200. > If it can do 1600x1200 then those specs are incorrect. > > > Mark. > > > On 4 Dec 2003, Jeff wrote: > > > Hi Guys, > > > > Ive got a geforce 4ti 4200 AGP8x and cant get the resolution above > > 1280x960. I'm running the latest nvidia drivers - are there any problems > > with them?! > > > > my config is attached.I have even tried commenting out all other > > resolutions apart from 1600x1200 (the res i want) with no luck. > > > > I know both the monitor and gfx card support 1600x1200 - it works under > > windoze > > > > all help appreciated > > Jeff > > > _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
