Peter Russell wrote: > > > Hi, > > I am trying to use an S3 ViRGE DX with XFree86. The eventual aim is to > use it as a second graphics card, but this problem happens equally with > one or both graphics cards installed. > > The problem is this: Whenever the image on the screen changes (for > example when moving the mouse or when a window is updated), the screen > flickers and the picture becomes corrupted with horizontal and vertical > lines. The effect is very hard to describe. When the movement stops so > does the flickering. However some vertical lines remain in some areas, > notably the title bar of windows. > > The problem seems to get worse the higher the colour depth the display > is set to. At 8bpp there is no problem, at 16bpp the problem is not as > bad, but at 24bpp the display is almost unusable (all of these examples > are at 1152x864). Similarly, the problem gets worse at higher > resolutions. At 800x600 the problem is either not noticable or not > present, at 1024x768 the problem is present, but not as severe, and at > 1152x864 the problem is very noticeable (all of these examples are at > 24bpp) > > I do not believe that there is a problem with the board itself (although > it is possible) since it works fine in Windows XP. > > I have tried setting the NoAccel, HWCursor, and UseFB options for the > s3virge driver but none of them made any difference. All at once, or individually? UseFB is the driver default for recent drivers, so shouldn't make a difference unless you used "usefb" "no". I'd be really surprised if NoAccel didn't fix this, but before you try it again, try adding "xvideo" "no" instead and tell us if that helps. Please send the driver log file again also. You should see the below go away when you set this option: (II) S3VIRGE(0): Using overlay video > > The board is a cheap generic S3 ViRGE DX (A sticker on it says "Sparkle" > if that helps) with 4 megs RAM. The monitor I am using is an iiyama > vision master 350. Below is a minimal XF86Config-4 file that causes my > system to exhibit the behaviour I described and my XFree86.0.log from > running it. I am using the version of XFree86 4.3 from the Debian > experimental distribution. The same problem was present with the > version of 4.2 which is in Debian unstable (I know I should not report > problems with this build, but it was the latest binary package I could > find for Debian. I was going to try compiling from CVS but gave up > checking it out after it had taken two hours!) > > Can anyone help me track down the cause of the problem? How can I find > out if this is a problem with the s3virge driver or with my board? Any > help would be very much appreciated. > > Peter Russell > > -- Minimal XF86Config-4 file: > > # This was generated by XFree86 -configure, I have made a few changes > # for my mouse & keyboard, taken DRI and GLX out of the list of > # modules, and added the default depth and modes lines. > Section "ServerLayout" > Identifier "XFree86 Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > RgbPath "/usr/X11R6/lib/X11/rgb" > ModulePath "/usr/X11R6/lib/modules" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/CID/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > EndSection > > Section "Module" > Load "dbe" > Load "extmod" > Load "record" > Load "xtrap" > Load "speedo" > Load "type1" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc105" > Option "XkbLayout" "gb" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "NetMousePS/2" > Option "Device" "/dev/psaux" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Monitor" > #DisplaySize 280 210 # mm > Identifier "Monitor0" > VendorName "IVM" > ModelName "MF-15 Series" > Option "DPMS" > EndSection > > Section "Device" > Identifier "Card0" > Driver "s3virge" > VendorName "S3 Inc." > BoardName "ViRGE/DX or /GX" > BusID "PCI:0:15:0" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Depth 24 > Modes "1152x864" "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > -- XFree86.0.log: > > This is a pre-release version of XFree86, and is not supported in any > way. Bugs may be reported to XFree86@xxxxxxxxxxx and patches submitted > to fixes@xxxxxxxxxxxx Before reporting bugs in pre-release versions, > please check the latest version in the XFree86 CVS repository > (http://www.XFree86.Org/cvs). > > XFree86 Version 4.3.0.1 (Debian 4.3.0-0pre1v4 20031024231956 > aigarius@xxxxxxxxxxx) > Release Date: 15 August 2003 > X Protocol Version 11, Revision 0, Release 6.6 > Build Operating System: Linux 2.4.22 i686 [ELF] > Build Date: 25 October 2003 > Before reporting problems, check http://www.XFree86.Org/ > to make sure that you have the latest version. > Module Loader present > OS Kernel: Linux version 2.4.21-3-k7 (herbert@gondolin) (gcc version > 3.3.1 20030626 (Debian prerelease)) #1 Sun Jul 20 19:23:36 EST 2003 T > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Sat Nov 29 17:53:05 2003 > (==) Using config file: "/etc/X11/XF86Config-4" > (==) ServerLayout "XFree86 Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Card0" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc105" > (**) XKB: model: "pc105" > (**) Option "XkbLayout" "gb" > (**) XKB: layout: "gb" > (==) Keyboard: CustomKeycode disabled > (WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist. > Entry deleted from font path. > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (**) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (II) Open APM successful > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.2 > XFree86 Video Driver: 0.6 > XFree86 XInput driver : 0.4 > XFree86 Server Extension : 0.2 > XFree86 Font Renderer : 0.4 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 1106,3099 card 1043,8064 rev 00 class 06,00,00 > hdr 00 > (II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 > hdr 01 > (II) PCI: 00:0d:0: chip 1102,0002 card 1102,8064 rev 08 class 04,01,00 > hdr 80 > (II) PCI: 00:0d:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00 > hdr 80 > (II) PCI: 00:0e:0: chip 1113,1211 card 1113,1211 rev 10 class 02,00,00 > hdr 00 > (II) PCI: 00:0f:0: chip 5333,8a01 card 5333,8a01 rev 01 class 03,00,00 > hdr 00 > (II) PCI: 00:11:0: chip 1106,3074 card 1043,8052 rev 00 class 06,01,00 > hdr 80 > (II) PCI: 00:11:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a > hdr 00 > (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 > hdr 00 > (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 > hdr 00 > (II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 > hdr 00 > (II) PCI: End of PCI scan > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) PCI-to-PCI bridge: > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0000 (VGA_EN is > cleared) > (II) PCI-to-ISA bridge: > (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is > set) > (--) PCI:*(0:15:0) S3 Inc. ViRGE/DX or /GX rev 1, Mem @ 0xf4000000/26, > BIOS @ 0x000c0000/16 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) PCI Memory resource overlap reduced 0xfc000000 from 0xfdffffff to > 0xfbffffff > (II) Active PCI resource ranges: > [0] -1 0 0xfb000000 - 0xfb0000ff (0x100) MX[B] > [1] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O > [2] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [3] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) > [4] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B] > [5] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] > [6] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] > [7] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B] > [8] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] > [9] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B] > [10] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xfb000000 - 0xfb0000ff (0x100) MX[B] > [1] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O > [2] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [3] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) > [4] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B] > [5] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] > [6] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] > [7] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B] > [8] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] > [9] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B] > [10] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfb000000 - 0xfb0000ff (0x100) MX[B] > [6] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O > [7] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [8] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) > [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [11] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B] > [12] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] > [13] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] > [14] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B] > [15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] > [16] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B] > [17] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "record" > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.13.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension RECORD > (II) LoadModule: "xtrap" > (II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a > (II) Module xtrap: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension DEC-XTRAP > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No > symbols found > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Speedo > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.2 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "s3virge" > (II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o > (II) Module s3virge: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.8.6 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.6 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.4 > (II) S3VIRGE: driver (version 1.8.6) for S3 ViRGE chipsets: virge, > 86C325, > virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2, > 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365, > trio 3d/2x, 86C362, 86C368 > (II) Primary Device is: PCI 00:0f:0 > (--) Assigning device section with no busID to primary device > (--) Chipset virge dx found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfb000000 - 0xfb0000ff (0x100) MX[B] > [6] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O > [7] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [8] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) > [9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [11] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B] > [12] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] > [13] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] > [14] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B] > [15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] > [16] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B] > [17] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] > (II) resource ranges after probing: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfb000000 - 0xfb0000ff (0x100) MX[B] > [6] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O > [7] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [8] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) > [9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [14] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B] > [15] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] > [16] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] > [17] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B] > [18] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] > [19] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B] > [20] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] > [21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (**) S3VIRGE(0): Depth 24, (--) framebuffer bpp 24 > (==) S3VIRGE(0): RGB weight 888 > (==) S3VIRGE(0): Default visual is TrueColor > (==) S3VIRGE(0): Using HW Cursor > (==) S3VIRGE(0): Using fb. > (==) S3VIRGE(0): mx_cr3a_fix. > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) S3VIRGE(0): initializing int10 > (II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000 > (II) S3VIRGE(0): VESA BIOS detected > (II) S3VIRGE(0): VESA VBE Version 2.0 > (II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB > (II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. ViRGE /DX /GX > (II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.1 > (II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated. > (II) S3VIRGE(0): VESA VBE OEM Product: ViRGE /DX /GX > (II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev B > (--) S3VIRGE(0): Chipset: "virge dx" > (==) S3VIRGE(0): XVideo supported. > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset > is 0x0000 > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset > is 0x0000 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Reloading /usr/X11R6/lib/modules/libddc.a > (II) S3VIRGE(0): VESA VBE DDC supported > (II) S3VIRGE(0): VESA VBE DDC Level 2 > (II) S3VIRGE(0): VESA VBE DDC transfer in appr. 1 sec. > (II) S3VIRGE(0): VESA VBE DDC read successfully > (II) S3VIRGE(0): Manufacturer: IVM Model: 1501 Serial#: 1 > (II) S3VIRGE(0): Year: 2000 Week: 0 > (II) S3VIRGE(0): EDID Version: 1.1 > (II) S3VIRGE(0): Analog Display Input, Input Voltage Level: 0.700/0.700 > V > (II) S3VIRGE(0): Signal levels configurable > (II) S3VIRGE(0): Sync: Separate CompositeSerration on. V.Sync Pulse > req. if CompSync or SyncOnGreen > (II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21 > (II) S3VIRGE(0): Gamma: 2.50 > (II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color > Display > (II) S3VIRGE(0): redX: 0.625 redY: 0.340 greenX: 0.290 greenY: 0.605 > (II) S3VIRGE(0): blueX: 0.150 blueY: 0.070 whiteX: 0.283 whiteY: 0.297 > (II) S3VIRGE(0): Supported VESA Video Modes: > (II) S3VIRGE(0): 640x480@60Hz > (II) S3VIRGE(0): 640x480@67Hz > (II) S3VIRGE(0): 640x480@72Hz > (II) S3VIRGE(0): 640x480@75Hz > (II) S3VIRGE(0): 800x600@60Hz > (II) S3VIRGE(0): 800x600@72Hz > (II) S3VIRGE(0): 800x600@75Hz > (II) S3VIRGE(0): 832x624@75Hz > (II) S3VIRGE(0): 1024x768@70Hz > (II) S3VIRGE(0): 1024x768@75Hz > (II) S3VIRGE(0): 1152x870@75Hz > (II) S3VIRGE(0): Manufacturer's mask: 70 > (II) S3VIRGE(0): Supported Future Video Modes: > (II) S3VIRGE(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 > (II) S3VIRGE(0): #1: hsize: 640 vsize 360 refresh: 60 vid: 49201 > (II) S3VIRGE(0): Supported additional Video Mode: > (II) S3VIRGE(0): clock: 110.0 MHz Image Size: 260 x 195 mm > (II) S3VIRGE(0): h_active: 1280 h_sync: 1311 h_sync_end 1503 > h_blank_end 3728 h_border: 0 > (II) S3VIRGE(0): v_active: 1024 v_sync: 1031 v_sync_end 1035 > v_blanking: 1078 v_border: 0 > (II) S3VIRGE(0): Supported additional Video Mode: > (II) S3VIRGE(0): clock: 21.0 MHz Image Size: 260 x 163 mm > (II) S3VIRGE(0): h_active: 640 h_sync: 700 h_sync_end 764 h_blank_end > 848 h_border: 0 > (II) S3VIRGE(0): v_active: 400 v_sync: 407 v_sync_end 415 v_blanking: > 440 v_border: 0 > (II) S3VIRGE(0): Monitor name: MF-15 Series > (II) S3VIRGE(0): Ranges: V min: 50 V max: 160 Hz, H min: 24 H max: 69 > kHz, PixClock max 1200 MHz > (==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0) > (--) S3VIRGE(0): videoram: 4096k > (--) S3VIRGE(0): Detected current MCLK value of 50.114 MHz > (WW) S3VIRGE(0): Monitor0: Using default hsync range of 24.00-69.00kHz > (WW) S3VIRGE(0): Monitor0: using default vrefresh range of > 50.00-160.00Hz > (II) S3VIRGE(0): Clock range: 10.00 to 270.00 MHz > (II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "640x480" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1600x1024" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1280x1024" (width too large for > virtual size) > (II) S3VIRGE(0): Not using default mode "1280x960" (width too large for > virtual size) > (--) S3VIRGE(0): Virtual size is 1152x864 (pitch 1152) > (**) S3VIRGE(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz > (II) S3VIRGE(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 > 865 868 900 +hsync +vsync > (**) S3VIRGE(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz > (II) S3VIRGE(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 > 769 772 808 +hsync +vsync > (**) S3VIRGE(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz > (II) S3VIRGE(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 > 604 631 +hsync +vsync > (**) S3VIRGE(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz > (II) S3VIRGE(0): Modeline "640x480" 36.00 640 696 752 832 480 481 > 484 509 -hsync -vsync > (**) S3VIRGE(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz > (II) S3VIRGE(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 > 771 777 806 +hsync +vsync > (**) S3VIRGE(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz > (II) S3VIRGE(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 > 769 772 800 +hsync +vsync > (**) S3VIRGE(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz > (II) S3VIRGE(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 > 771 777 806 -hsync -vsync > (**) S3VIRGE(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz > (II) S3VIRGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 > 771 777 806 -hsync -vsync > (**) S3VIRGE(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz > (I) > (II) S3VIRGE(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 > 768 776 817 interlace +hsync +vsync > (**) S3VIRGE(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz > (II) S3VIRGE(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 > 628 667 -hsync -vsync > (**) S3VIRGE(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz > (II) S3VIRGE(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 > 604 625 +hsync +vsync > (**) S3VIRGE(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz > (II) S3VIRGE(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 > 643 666 +hsync +vsync > (**) S3VIRGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz > (II) S3VIRGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 > 605 628 +hsync +vsync > (**) S3VIRGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz > (II) S3VIRGE(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 > 603 625 +hsync +vsync > (**) S3VIRGE(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz > (D) > (II) S3VIRGE(0): Modeline "700x525" 61.00 700 744 820 940 525 526 > 532 541 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz > (D) > (II) S3VIRGE(0): Modeline "640x512" 54.00 640 664 720 844 512 512 > 514 533 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz > (II) S3VIRGE(0): Modeline "640x480" 31.50 640 656 720 840 480 481 > 484 500 -hsync -vsync > (**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz > (II) S3VIRGE(0): Modeline "640x480" 31.50 640 664 704 832 480 489 > 491 520 -hsync -vsync > (**) S3VIRGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz > (II) S3VIRGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 > 492 525 -hsync -vsync > (**) S3VIRGE(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz > (D) > (II) S3VIRGE(0): Modeline "640x480" 54.00 640 688 744 900 480 480 > 482 500 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz > (II) S3VIRGE(0): Modeline "720x400" 35.50 720 756 828 936 400 401 > 404 446 -hsync +vsync > (**) S3VIRGE(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz > (II) S3VIRGE(0): Modeline "640x400" 31.50 640 672 736 832 400 401 > 404 445 -hsync +vsync > (**) S3VIRGE(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz > (D) > (II) S3VIRGE(0): Modeline "576x432" 54.00 576 608 672 800 432 432 > 434 450 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz > (II) S3VIRGE(0): Modeline "640x350" 31.50 640 672 736 832 350 382 > 385 445 +hsync -vsync > (**) S3VIRGE(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz > (D) > (II) S3VIRGE(0): Modeline "576x384" 32.50 576 589 657 736 384 385 > 388 403 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz > (D) > (II) S3VIRGE(0): Modeline "512x384" 47.25 512 536 584 688 384 384 > 386 404 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz > (D) > (II) S3VIRGE(0): Modeline "512x384" 39.40 512 520 568 656 384 384 > 386 400 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz > (D) > (II) S3VIRGE(0): Modeline "512x384" 37.50 512 524 592 664 384 385 > 388 403 doublescan -hsync -vsync > (**) S3VIRGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz > (D) > (II) S3VIRGE(0): Modeline "512x384" 32.50 512 524 592 672 384 385 > 388 403 doublescan -hsync -vsync > (**) S3VIRGE(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz > (D) > (II) S3VIRGE(0): Modeline "512x384" 22.45 512 516 604 632 384 384 > 388 409 interlace doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz > (D) > (II) S3VIRGE(0): Modeline "416x312" 28.64 416 432 464 576 312 312 > 314 333 doublescan -hsync -vsync > (**) S3VIRGE(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz > (D) > (II) S3VIRGE(0): Modeline "400x300" 28.15 400 416 448 524 300 300 > 302 315 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz > (D) > (II) S3VIRGE(0): Modeline "400x300" 24.75 400 408 448 528 300 300 > 302 312 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz > (D) > (II) S3VIRGE(0): Modeline "400x300" 25.00 400 428 488 520 300 318 > 321 333 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz > (D) > (II) S3VIRGE(0): Modeline "400x300" 20.00 400 420 484 528 300 300 > 302 314 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz > (D) > (II) S3VIRGE(0): Modeline "400x300" 18.00 400 412 448 512 300 300 > 301 312 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz > (D) > (II) S3VIRGE(0): Modeline "320x240" 18.00 320 348 376 416 240 240 > 242 254 doublescan -hsync -vsync > (**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz > (D) > (II) S3VIRGE(0): Modeline "320x240" 15.75 320 328 360 420 240 240 > 242 250 doublescan -hsync -vsync > (**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz > (D) > (II) S3VIRGE(0): Modeline "320x240" 15.75 320 332 352 416 240 244 > 245 260 doublescan -hsync -vsync > (**) S3VIRGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz > (D) > (II) S3VIRGE(0): Modeline "320x240" 12.60 320 328 376 400 240 245 > 246 262 doublescan -hsync -vsync > (**) S3VIRGE(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz > (D) > (II) S3VIRGE(0): Modeline "360x200" 17.75 360 378 414 468 200 200 > 202 223 doublescan -hsync +vsync > (**) S3VIRGE(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz > (D) > (II) S3VIRGE(0): Modeline "320x200" 15.75 320 336 368 416 200 200 > 202 222 doublescan -hsync +vsync > (**) S3VIRGE(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz > (D) > (II) S3VIRGE(0): Modeline "320x175" 15.75 320 336 368 416 175 191 > 192 222 doublescan +hsync -vsync > (++) S3VIRGE(0): DPI set to (100, 100) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.2 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (==) Depth 24 pixmap format is 32 bpp > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0 0xf4000000 - 0xf7ffffff (0x4000000) MS[B] > [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [4] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [6] -1 0 0xfb000000 - 0xfb0000ff (0x100) MX[B] > [7] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O > [8] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [9] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) > [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [15] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B] > [16] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] > [17] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] > [18] -1 0 0x0000b800 - 0x0000b80f (0x10) IX[B] > [19] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] > [20] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B] > [21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] > [22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) > [23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) > (==) S3VIRGE(0): Write-combining range (0xf4000000,0x400000) > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset > is 0x0000 > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset > is 0x0000 > (**) S3VIRGE(0): Using FB > (II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > CPU to Screen color expansion > Solid Horizontal and Vertical Lines > Image Writes > Offscreen Pixmaps > Setting up tile and stipple cache: > 18 128x128 slots > (==) S3VIRGE(0): Backing store disabled > (==) S3VIRGE(0): Silken mouse enabled > (**) Option "dpms" > (**) S3VIRGE(0): DPMS enabled > (II) S3VIRGE(0): Using overlay video > (==) RandR enabled > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (**) Option "Protocol" "NetMousePS/2" > (**) Mouse0: Protocol: "NetMousePS/2" > (**) Option "CorePointer" > (**) Mouse0: Core Pointer > (**) Option "Device" "/dev/psaux" > (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 > (**) Option "ZAxisMapping" "4 5" > (**) Mouse0: ZAxisMapping: buttons 4 and 5 > (**) Mouse0: Buttons: 5 > (II) Keyboard "Keyboard0" handled by legacy driver > (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) > (II) Server_Terminate keybinding not found > (II) Mouse0: ps2EnableDataReporting: succeeded -- Kevin _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
