I'm trying to start up a second display with one client using this
command:
xinit /usr/X11R6/bin/xclock -- /usr/X11R6/bin/X :1
If I run this from the console, it works, but if I run this from a
terminal window in the first display, it doesn't. What happens is that X
starts, but the client doesn't. This is the output that I get.
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20 i586 [ELF]
Build Date: 28 April 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.1.log", Time: Sat Oct 18 11:40:42 2003
(==) Using config file: "/etc/X11/XF86Config"
Using vt 8
(==) Wacom tablet model : GD-0912-R00,V1.1-7
(==) Wacom V tablet maximum X=30480 maximum Y=24060 X resolution=2540 Y
resolution=2540 suppress=19 Tilt
(==) Wacom tablet top X=0 top Y=0 bottom X=30480 bottom Y=24060
(==) Wacom tablet top X=0 top Y=0 bottom X=30480 bottom Y=24060
(==) Wacom tablet top X=0 top Y=0 bottom X=30480 bottom Y=24060
AUDIT: Sat Oct 18 11:40:56 2003: 3338 X: client 1 rejected from local
host
Xlib: connection to ":1.0" refused by server
Xlib: No protocol specified
waiting for X server to begin accepting connections .
AUDIT: Sat Oct 18 11:40:58 2003: 3338 X: client 1 rejected from local
host
Xlib: connection to ":1.0" refused by server
Xlib: No protocol specified
..
AUDIT: Sat Oct 18 11:41:00 2003: 3338 X: client 1 rejected from local
host
Xlib: connection to ":1.0" refused by server
Xlib: No protocol specified
..
AUDIT: Sat Oct 18 11:41:02 2003: 3338 X: client 1 rejected from local
host
Xlib: connection to ":1.0" refused by server
Xlib: No protocol specified
..
XIO: fatal IO error 104 (Connection reset by peer) on X server ":1.0"
after 0 requests (0 known processed) with 0 events remaining.
I'm running Gentoo Linux, kernel 2.4.20. I've got Xinerama running on
the first display, but the second only uses one monitor. The main
monitor is driven by a voodoo3, the secondary is driven by an S3Virge
compatible card.
I didn't file a bug, because it seems like something simple that I
didn't do correctly, but I haven't found any answers in the archives, or
on the web.
Thanks for any help.
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
