El Lun 13 Oct 2003 23:59, Egbert Eich escribió: > Eduardo Huertas writes: > > Hi, > > > > I've been having problems configuring a Cirrus Logic 5446 even though > > your site says it is supported. > > That's euphemism. It probably should be changed. > The chipset is supported because the driver knows about it and > should theoretically be able to drive it. That's what supported > means. > However the driver isn't supported. It means: you get it as is. > If it works - fine. If it doesn't - tough luck. > Nobody who would be able and willing to support this driver has > the hardware you are talking about. Nobody who has the hardware > is willing or able to support it. > Since this is open source you are invited to fix the driver yourself. > > > I'm using a Gateway 2000 with 64 MB and a Pentium 120 > > > > I tried first with Linux Mandrake 9.1 and now I'm trying with FreeBSD > > 4.8. I've used every combination of resolution with 8, 15, 16 and 32 > > color depth. > > > > I used Option "noaccel" and Option "no_bitblt" and the main problem > > persists: the screen shows in triple a litle piece at top and a litle > > piece at bottom and almost the whole screen at center. It also shows > > three pointer mouse. > > > > The monitor I'm using is an AcerView 34T. > > > > Where can I see a configuration file that works fine? > > Probably none? Because the driver is broken. > > > In linux mandrake I could try with Xfree86 3.3.6 and 4.3 and used > > XFdrake program. > > Yes, that's possible. In those days this driver was supported. > > Egbert. Well I could run XFree86 3.3.6 with the last port on FreeBSD 4.8 Now how can I tell it to use a spanish keyboard? When I configured via xf86config there was not a spanish keyboard option. Thanks for your help. -edu- _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
