I have installed linux on severel PC's and it works well, but with my old laptop Compaq LTE 5300 I have difficulties with the X-Configuration.
In the XFree86 log file I see your E-mail adresse at the end, so no I want to ask for help.
Attached to this mail is four files. I have tried with two different configurations. There is one complete XF86Config and XFree86.log for both
configurations.
The first configuration is when I installed Linux RedHat 8.0. As you can see the XF86Config is build by anaconda. The file is XF86Config.org(original). When starting X the log-file XFree86.log.org is made. Here I observe that insufficient memory is a problem among other things.
The second configuration is downloaded from internett. After a long time as was able to download a configuration for LTE 5300, but i was not
ok. I had to remove som items due to parsing error. The removed items is market with two ##. There is also problems with this configuration due to "No devices detected". This second configuration have the files XF86Config.ex1(example 1) and XFree86.log.ex1.
I feel that the second configuration is the best approach, and hope that you could give me some help.
As you can see my E-mail is: tom.halvorsen@xxxxxxxxxxx
Thanks in advance,
Tom Halvorsen (NORWAY)
#-
#
1999/05/17
# Jacek Pliszka
# pliszka@xxxxxxxxxx
# Compaq LTE 5300
# P133
# Red Hat
# 6.0
# XFree86 3.3.3.1-49
# XF86_SVGA
# Cirrus Logic GD754x
# 1MB
# 16bpp
# 800x600
# 12.1"
# TFT
#
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
EndSection
Section "Keyboard"
Protocol "Standard"
AutoRepeat 500 5
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Xleds 1 2 3
# To set the LeftAlt to Meta, RightAlt key to ModeShift,
# RightCtl key to Compose, and ScrollLock key to ModeLock:
## LeftAlt Meta
## RightAlt ModeShift
# RightCtl Compose
## RightCtl Control
## ScrollLock ModeLock
# ScrollLock Compose
# To disable the XKEYBOARD extension, uncomment XkbDisable.
XkbKeycodes "xfree86"
XkbTypes "default"
XkbCompat "default"
XkbSymbols "us(pc101)"
XkbGeometry "pc"
XkbRules "xfree86"
XkbModel "pc101"
XkbLayout "us"
EndSection
Section "Pointer"
Protocol "PS/2"
Device "/dev/mouse"
Emulate3Buttons
Emulate3Timeout 50
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
Section "Monitor"
Identifier "Compaq LTE 5300 LCD"
VendorName "Compaq"
ModelName "12.1 TFT"
HorizSync 31.5-58
VertRefresh 50-100
Modeline "800x600a" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600b" 36 800 824 896 1024 600 601 603 625
ModeLine "800x600c" 40 800 840 968 1000 600 601 602 640
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Cirrus Logic GD754x (laptop)"
VendorName "Compaq"
BoardName "LTE 5300"
Driver "cirrus"
VideoRam 1024
# Option "linear"
# Use Option "no_bitblt" if you have graphics problems. If that fails
# try Option "noaccel".
# Refer to /usr/X11R6/lib/doc/README.cirrus.
EndSection
# **********************************************************************
# Screen sections
#
#**********************************************************************
# The Colour SVGA server
Section "Screen"
Driver "svga"
Device "Cirrus Logic GD754x (laptop)"
Monitor "Compaq LTE 5300 LCD"
DefaultColorDepth 16
Subsection "Display"
Depth 16
Modes "800x600a" "800x600b" "800x600c"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 8
Modes "800x600a" "800x600b" "800x600c"
ViewPort 0 0
EndSubsection
EndSection
# File generated by anaconda.
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "dri"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc102"
Option "XkbLayout" "no"
#Option "XkbVariant" ""
#Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5-37.9
VertRefresh 40-70
Option "dpms"
EndSection
Section "Device"
# no known options
Identifier "Cirrus Logic GD754x (laptop)"
Driver "vga"
VendorName "Cirrus Logic GD754x (laptop)"
BoardName "Cirrus Logic GD754x (laptop)"
#BusID
EndSection
Section "Screen"
Identifier "Screen0"
Device "Cirrus Logic GD754x (laptop)"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.18-14 (bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 11:57:57 EDT 2002 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Dec 13 08:40:05 1999 (==) Using config file: "/etc/X11/XF86Config" (WW) No Layout section. Using the first Screen section. (**) |-->Screen "svga" (0) (**) | |-->Monitor "Compaq LTE 5300 LCD" (**) | |-->Device "Cirrus Logic GD754x (laptop)" (==) |-->Input Device "Implicit Core Pointer" (==) |-->Input Device "Implicit Core Keyboard" (**) Option "Protocol" "Standard" (**) Option "AutoRepeat" "500 5" (**) Option "XkbCompat" "default" (**) XKB: compat: "default" (**) Option "XkbTypes" "default" (**) XKB: types: "default" (**) Option "XkbKeycodes" "xfree86" (**) XKB: keycodes: "xfree86" (**) Option "XkbGeometry" "pc" (**) XKB: geometry: "pc" (**) Option "XkbSymbols" "us(pc101)" (**) XKB: symbols: "us(pc101)" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc101" (**) XKB: model: "pc101" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:-1" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1045,c557 card 0000,0000 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1045,c558 card 0000,0000 rev 00 class 06,01,00 hdr 00 (II) PCI: 00:02:0: chip 1013,1202 card 0000,0000 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus -1: bridge is at (0:1:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(0:2:0) Cirrus Logic GD7543 rev 0, Mem @ 0xc0000000/24, 0xc1000000/24 (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [1] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [1] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [6] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B) [7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) LoadModule: "cirrus" (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o (II) Module cirrus: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.3 (II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8, CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD, CL-GD5465, CL-GD7548 (II) Primary Device is: PCI 00:02:0 (--) Assigning device section with no busID to primary device (EE) No devices detected. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xxxxxxxxxxx
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-11smp i686 [ELF]
Build Host: daffy.perf.redhat.com
Module Loader present
OS Kernel: Linux version 2.4.18-14 (bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxx)
(gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 11:57:57
EDT 2002
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Dec 13 08:38:15 1999
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Anaconda Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Cirrus Logic GD754x (laptop)"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc102"
(**) XKB: model: "pc102"
(**) Option "XkbLayout" "no"
(**) XKB: layout: "no"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1045,c557 card 0000,0000 rev 00 class 06,00,00 hdr
00
(II) PCI: 00:01:0: chip 1045,c558 card 0000,0000 rev 00 class 06,01,00 hdr
00
(II) PCI: 00:02:0: chip 1013,1202 card 0000,0000 rev 00 class 03,00,00 hdr
00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1: bridge is at (0:1:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:2:0) Cirrus Logic GD7543 rev 0, Mem @ 0xc0000000/24,
0xc1000000/24
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B)
[1] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B)
[1] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B)
[6] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)
[7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vga"
(II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 4.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset generic found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B)
[6] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)
[7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B)
[6] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)
[7] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[8] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[9] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[12] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[13] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) VGA(0): initializing int10
(II) VGA(0): Primary V_BIOS segment is: 0xc000
(**) VGA(0): Depth 16, (--) framebuffer bpp 16
(==) VGA(0): RGB weight 565
(==) VGA(0): Default visual is TrueColor
(==) VGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) VGA(0): videoRam: 256 kBytes.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) VGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) VGA(0): Pixel clocks available:
(--) VGA(0): pixel clocks: 28.340 28.322 24.370 28.330
(II) VGA(0): Monitor0: Using hsync range of 31.50-37.90 kHz
(II) VGA(0): Monitor0: Using vrefresh range of 40.00-70.00 Hz
(II) VGA(0): Not using default mode "640x350" (insufficient memory for mode)
(II) VGA(0): Not using default mode "320x175" (vrefresh out of range)
(II) VGA(0): Not using default mode "640x400" (insufficient memory for mode)
(II) VGA(0): Not using default mode "320x200" (vrefresh out of range)
(II) VGA(0): Not using default mode "720x400" (insufficient memory for mode)
(II) VGA(0): Not using default mode "360x200" (hsync out of range)
(II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
(II) VGA(0): Not using default mode "320x240" (hsync out of range)
(II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
(II) VGA(0): Not using default mode "320x240" (vrefresh out of range)
(II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
(II) VGA(0): Not using default mode "320x240" (vrefresh out of range)
(II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
(II) VGA(0): Not using default mode "320x240" (hsync out of range)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using default mode "400x300" (hsync out of range)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using default mode "400x300" (hsync out of range)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using default mode "400x300" (hsync out of range)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using default mode "400x300" (hsync out of range)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using default mode "400x300" (hsync out of range)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1024x768" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1152x864" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "576x432" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1280x960" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1280x960" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x512" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x512" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1280x1024" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "640x512" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "896x672" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "896x672" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "928x696" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "928x696" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "960x720" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "960x720" (insufficient memory for mode)
(II) VGA(0): Not using default mode "832x624" (insufficient memory for mode)
(II) VGA(0): Not using default mode "416x312" (hsync out of range)
(II) VGA(0): Not using default mode "1152x864" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "576x432" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "700x525" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "700x525" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "700x525" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "700x525" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1600x1024" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "800x512" (insufficient memory for mode)
(II) VGA(0): Not using default mode "1920x1200" (insufficient memory for
mode)
(II) VGA(0): Not using default mode "960x600" (insufficient memory for mode)
(WW) VGA(0): Mode pool is empty
(==) VGA(0): Virtual size is 320x200 (pitch 320)
(**) VGA(0): Built-in mode "Generic 320x200 default mode": 12.6 MHz (scaled
from 25.2 MHz), 31.5 kHz, 70.2 Hz (VScan)
(II) VGA(0): Modeline "Generic 320x200 default mode" 12.59 320 336 384
400 200 206 207 224 vscan 2 -hsync +vsync
(==) VGA(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xc1000000 - 0xc1ffffff (0x1000000) MS[B]
[1] 0 0xc0000000 - 0xc0ffffff (0x1000000) MS[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B)
[8] -1 0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)
[9] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[11] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[15] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(WW) System lacks support for changing MTRRs
Fatal server error:
AddScreen/ScreenInit failed for driver 0
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xxxxxxxxxxxx
