ah actually now it is not choosing my modeline and I do not understand
why:
(II) Silicon Motionlg: Using hsync range of 14.00-80.00 kHz
(II) Silicon Motionlg: Using vrefresh range of 56.00-76.00 Hz
(II) Silicon MotionClock range: 14.00 to 135.00 MHz
(II) Silicon MotionMode: 640x480 16-bpp, 59.990181Hz
(II) Silicon MotionNot using mode "640x480i" (vrefresh out of range)
(II) Silicon MotionMode: 640x350 16-bpp, 85.079948Hz
(II) Silicon MotionNot using default mode "640x350" (vrefresh out of range)
vrefresh range is 56-76Hz, so why is my 640x480i modeline, at 59.99Hz
vrefresh, rejected ?
the modeline is as follows:
ModeLine "640x480i" 24.44 640 680 728 776 480 480 484 525 Interlace Composite
bruno
On Wed, 7 Mar 2007, bruno schwander wrote:
I think I figured it out, however it seems that although my modeline includes
'composite'
DisplayModePtr mode->Flags & V_CSYNC
does not evaluate to true. I assume as long as the 'composite' keyword is
found on the modeline, the flag should be set, right ?
I need to add some debug messages, but this seems a little strange. Is there
something else that needs to be configured, like telling that the driver
actually supports the composite keyword on the modeline ?
On a different note, the latest X release does not seem to work on that chip.
I just get a blank screen. So I started hacking on Xorg 6.8.2 to test this
stuff. I figure XFree86 4.5 should work, but 4.6 does not.
I'll provide patches to all and note on which version it was tested of
course, once it works :-)
bruno
On Tue, 27 Feb 2007, Marc Aurele La France wrote:
On Sun, 25 Feb 2007, bruno schwander wrote:
On Fri, 23 Feb 2007, Marc Aurele La France wrote:
On Thu, 22 Feb 2007, bruno schwander wrote:
A little background: I have a single board PC with a SMI712 (lynxEM+)
graphic chipset. X works like a charm.
The driver currently ignores the V_CSYNC mode flag, so you would need to
come up with a source patch to change that.
I'd be happy to provide a patch, if I can figure where to put that. Since
it is only a matter of setting one register it should be simple enough. I
have (had?) no idea where to start, I'll grep for V_CSYNC and see...
An appropriate spot for such changes would be after calls to vgaHWInit(),
which, in this case, is in SMI_ModeInit().
Marc.
+----------------------------------+----------------------------------+
| Marc Aurele La France | work: 1-780-492-9310 |
| Academic Information and | fax: 1-780-492-1729 |
| Communications Technologies | email: tsi@xxxxxxxxxxx |
| 352 General Services Building +----------------------------------+
| University of Alberta | |
| Edmonton, Alberta | Standard disclaimers apply |
| T6G 2H1 | |
| CANADA | |
+----------------------------------+----------------------------------+
XFree86 developer and VP. ATI driver and X server internals.
_______________________________________________
Devel mailing list
Devel@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/devel
_______________________________________________
Devel mailing list
Devel@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/devel
_______________________________________________
Devel mailing list
Devel@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/devel
