your XF86Config would be helpful to find out why Xconfigurator selected this frequency... By the way, have you tried the other configuration programs There are two or three: X -configure or xf86cfg etc. just save your XF86Config and try... Lionel --- "John D. L. Platt" <jplatt@cyberspace.org> wrote: > I recently loaded RedHat Linux 7.1 on an old NEC Ready 7022 which was > free. It wouldn't load at all until I did a text install, which I'm not > that unhappy with (I like text interfaces) but I do need graphics for some > things, and no matter how I run Xconfigurator I can't get it to run > because it doesn't like the clock speed. My monitors are either a Compaq > Presario 150 or a Unisys EVG 300 Col. Regardless of which I run the error > messages are the same. Here is an example output file, done after I > purged my config file of the options (noaccel, SWCursor) suggested in > README.apm (it's a 6422 graphics chip set) which seem to > have no effect at all. > > > > XFree86 Version 3.3.6a / X Window System > (protocol Version 11, revision 0, vendor release 6300) > Release Date: February 17 2001 > If the server is older than 6-12 months, or if your card is newer > than the above date, look for a newer version before reporting > problems. (see http://www.XFree86.Org/FAQ) > Operating System: Linux 2.2.17-8smp i686 [ELF] > Configured drivers: > SVGA: server for SVGA graphics adaptors (Patchlevel 1): > s3_savage, NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, > RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, > GeForce 256, GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1), > GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, > Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, > ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, > ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, > wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati, > sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, > sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, > tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, > tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, > tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, > tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, > cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, > clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, > clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, > clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, > clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, > mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, > oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, > ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, > ark2000pv, ark2000mt, mx, realtek, s3_virge, AP6422, AT24, AT3D, > s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, > ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, > ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300, > mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, > Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, smi, generic > (using VT number 7) > > XF86Config: /usr/X11R6/lib/X11/XF86Config > (**) stands for supplied, (--) stands for probed/default values > (**) XKB: keycodes: "xfree86" > (**) XKB: types: "default" > (**) XKB: compat: "default" > (**) XKB: symbols: "us(pc101)" > (**) XKB: geometry: "pc" > (**) XKB: rules: "xfree86" > (**) XKB: model: "pc101" > (**) XKB: layout: "us" > (**) Mouse: type: PS/2, device: /dev/mouse, buttons: 5 > (**) Mouse: zaxismapping: (-)4 (+)5 > (**) SVGA: Graphics device ID: "Alliance ProMotion 6422" > (**) SVGA: Monitor ID: "Unisys EVG-300-COL" > (--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted. > (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. > (--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. > (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. > (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. > (--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted. > (--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. > (--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. > (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. > (--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. > (--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. > (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. > (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. > (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. > (--) SVGA: Mode "1400x1050" needs hsync freq of 65.82 kHz. Deleted. > (--) SVGA: Mode "1400x1050" needs hsync freq of 77.04 kHz. Deleted. > (--) SVGA: Mode "1400x1050" needs hsync freq of 82.65 kHz. Deleted. > (--) SVGA: Mode "1400x1050" needs hsync freq of 93.88 kHz. Deleted. > (--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. > (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. > (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. > (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. > (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. > (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. > (**) FontPath set to "unix/:7100" > (--) SVGA: PCI: Alliance Semiconductor ProMotion 6422 rev 2, Memory @ > 0xfd000000, I/O @ 0xfce0 > (--) SVGA: chipset: AP6422 > (--) SVGA: videoram: 990k > (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 > (--) SVGA: Maximum allowed dot-clock: 135.000 MHz > (**) SVGA: Mode "640x480": mode clock = 36.000 > (--) SVGA: Virtual resolution set to 640x480 > (--) SVGA: SpeedUp code selection modified because virtualX != 1024 > (--) SVGA: AP6422: Using linear framebuffer at 0xFD000000 (PCI bus) > (--) SVGA: AP6422: Using hardware cursor > (--) SVGA: AP6422: Cannot find register values for clock 36.00 MHz. Please > use a (slightly) different clock. > > Fatal server error: > SVGA: hardware initialisation failed > > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages > > > __________________________________________________ Do you Yahoo!? HotJobs - Search new jobs daily now http://hotjobs.yahoo.com/ _______________________________________________ Newbie@XFree86.Org *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
